Introduction
© 2016. All rights are reserved. No part of this document may
be reproduced without permission.
While all efforts hav e been made t o ensur e th e accur acy of all
contents in this manual, we assume no liability for errors or
omissions or statements of any kind in this manual, whether
such errors or omissions or statements resulting from
negligence, accidents, or any other cause. The contents of
this manual are subject to change without notice.
Protect our environment! We strive to produce products in
compliance with global environmental standards. Please
consult your local authorities for proper disposal.
Note: User’s Manual is just to guide the user about the
functionality of the phone. This does not substantiate any
certificate of technology. Some functions may very due to
modifications and up-gradation of software or due to printing
mistake
Welcome
Congratulations on your purchase of our phone. Your phone
provides many functions which are practical for daily use,
such as a MP3 player, Loud Speaker, Games & more
You can read the manual for complete knowledge about the
use of the mobile hand set a nd ex peri ence t he fr equentl y us ed
functions, simple & smart usage. Please use the original
accessories in order to achieve best results. Use of
non-original components may cause damage to machinery,
for which the company shall not be held responsible.
For Your Safety
Before using your handset, please read the following important
information to eliminate or reduce any possibility of causing
damage and personal injury.
when the use of
wireless devices is prohibited or when the wireless
health care facilities. Switch your phone off near
Switch your phone off in aircraft. The radio signal
from it may cause interference in signals of the
Do not switch your handset on
device may cause interference or danger.
Do not use your phone while driving.
Follow relevant rules or regulations in hospitals and
medical devices.
aircraft.
Switch your phone off near high-precision
electronic devices. It may affect the performance
of these dev ices.
Do not attempt to disassemble your phone
accessories. Only qualified personnel may service or
repair the phone .
Do not place your phone and its accessories in
Do not place magnetic storage media near your
use it in a place with flammable gas such as a petrol
Observe any laws or regulations on the use of
phone. Respect others' privacy and legal rights
container s with strong electroma gnetic field.
phone. Radiation from the phone
information stor e d o n them.
Do not put your phone in a high-temperature place or
pumps.
when using your ph one .
Improper use will invalidate the warranty! These safety instruction s
also apply to original accessories.
Handset overview
Powering On/Off the Mobile Phone
1. Hold the End key for a while to power on the mobile
phone(So it is with the Powering off phone)
Phone Lock Code
2. The phone will automatically search for av ail abl e
networks.
Phone code could prevent your phone from illegal use. The default
phone code is 0000. Please change it to your own as soon as
possible.
Notes: Please rem ember the code; otherwise som e service ex pense
may happen.
PIN and PUK
PIN Code
PIN code could prevent your UIM card from illegal use. When PIN
is lock is on, you should enter the PIN code when powering on the
handset again. The network provider offers you PIN code (four to
eight digit).You should change PIN code as soon as possible for
security.
PUK Code
Consecutive inputting wrong PIN code for three times can cause
locking of UIM card. To Unlock, you need PUK code.
Notes: PIN code and PUK code may be offered together with the
UIM card. If not, please contact your network service provider.
Please change default PIN code to your own as soon as possible.
Memory Card
The Memory Card is pluggable storage cards inside the mobile
phone. To insert the Memory Card, open its latch, insert the card
into the card slot, and then close the latch. To remove the Memory
Card, open its latch and slightly take the ca rd out. And then close
the latch.
Important password
Phone lock password is default 0000
Charging the Battery
1. Insert the lead from the charger to the socket, and
connect the charger to a standard wall AC socket.
2. After the completion charging, disconnect the charger
from the phone and AC socket.
Key functions:
Key Function Description