Guatemala is an Android intelligent mobile phone, it has the ultra-thin fashion
appearance, it supports application software installation and unloading from Android
electronic market, WLAN network connection, touch capacitive screen, high-pixels
cameras, high-quality audio and ultra HD video, etc. These will lead you into an entirely
new and fascinating mobile internet world.
This manual systematically introduces many functions of S4002 mobile phone, tips and
notes. Please carefully read it before usingGuatemala.
The illustrations in this manual are only for reference, and their functions are based on
the real product. The company reserves the right of final interpretation.
6. Bluetooth ........................................................................................................................................ 8
21. Notices for the use of phone ...................................................................................................... 40
22. FCC Information ........................................................................................................................ 44
User Manual
2
While driving or answering a call,
please use an earphone or stop
Mobile phone interferes with aircraft
communication, please ensure that
All mobile phones may be dist ur bed,
Please don’t use mobile phone and turn
off your phone where medical
To ensure the best performance or
avoid damage to mobile phone,
please use the original accessories
At the gas station and close to the fuel
her dangerous
goods, please power off your mobile
To avoid interference of the blasting
operation, In the scene of the
icon in the local, please power off
Please don't burn batteries as ordinary
garbage, to avoid the risk of life and
damage to the environments. Please
timely deal with or recycle the waste
Before your mobile phone is connect
carefully this manual to ensure
Some small articles (such as T-Flash
card, etc.) should be placed out of
children reach, to prevent children
Please backup the important
When sending an emergency call,
on and in a service area, inform your
position, without permission, please
1.SafetyPrecautions
Before using a mobile phone, please read and observe the following rules.
your car.
and affect their performance.
and batteries.
explosion or post "Turn off the radio"
your mobile phone.
with another equip ment, p lease r ead
safety.
information or keep a written record,
to prevent its loss.
mobile phone power off d uring t he ent ire
flight.
equipments exist.
and chemicals and ot
phone to avoid explosion.
abide by the local environmental policy,
batteries.
swallowing or other hazar d.
please ensure your mobile phone power
don't end this call.
2.Before Use
1.Install and Unload SIM Card
1.1 About SIM Card
Before using the phone, you must insert valid SIM (Subscriber Identity Module) card in the phone. SIM
card provided by network supplier.
All the information related to network connection are recorded in the chip of SIM card, also the names,
telephone numbers and SMS that storing in the name card holder of SIM card. You can take out SIM
card from your phone, and use it in any GSM mobile phone (new mobile phone can read SIM card
automatically).
In order to avoid losing or damaging the information saves in SIM card, please don’t touch the metal
contact surface, and place SIM card in the place that away from electricity and magnetic force. Once
SIM card is damaged, you can’t use t he phone normally.
User Manual
3
Prompt: Please make sure to power off the phone before taking out SIM card. It is
absolutely forbidden to insert or take out SIM card with external power supply; otherwise it
may damage SIM card and the phone.
1.2Insert and Unload SIM Card
Metal contact surface of SIM card is easily scratched. You must take out SIM card ca refully before th e
assembly.
Power off the phone, remove the rear cover, battery or other external power supp ly .
Make the end of SIM card without cutting angle inside and aim at the card slot of the phone and metal
surface of SIM card face downward, then insert SIM card to the card slot of the phone, the other SIM card
is also inserted in this way .
When taking out SIM card, directly pull it outward and then can t ake out SIM card.
Prompt: Without special explanation inserting two SIM cards are defaulted in the manual. If
you just insert one SIM card, maybe some options of the menu will not be shown.
2.T-Flash Card
Aim at the T card slot and push the T card gently, and the card will be inserted correctly.
Prompt: If the memory card is failed, please check whether it is correctly placed and good
contact of metal point.
3.Install and Unload Battery
Take off the rear cover of the mo bi le.
Make one end of battery with m et al surface aim at the battery connector.
Then gently press the battery downward us ing the finger, and then pr ess the other end to install the battery.
Prompt: Please operate correct ly t o avoid damaging the battery connector.
4.Charging
Charger
Insert the charger on the charging interfac e at the top of the phone. After in serting the charging plug, bat tery
strength icon stripe at the top right corner of the screen is scrolling, which means that the charging is
processing; when the stripe is full of the whole icon and stop scrolling, which means that the battery
charging is completed; when the charg ing is completed, please pull out the plug.
When electric quantity is not enough, warning message will be sent; and electric quantity shows empty.
When electric quantity is too low, the phone will power off automatically. Please don’t make the battery in
the status of not enough electric quantity for a long time; otherwise it may damage the battery quality and
service life. Please don’t char ge the battery for a long time.
Prompt: In order to ensure normal operation of the phone, please make sure to use the
designated charger.
User Manual
4
Keys
Functions
home
Press this button to return home from any application or interface.
Press it to return to the previous interface,or to close dialog box 、options’
menu、notification panel or the keypad.
Long press [Power] key to power on or off mobile phone.
turn off the phone,or set it to the silent mode .
Press it to increase the volume
Press it to turn the phone to vibration mode from the silent mode.
down
Press it to decrease the volume.
3.Appearance an d Keypad Operati ons
Menu Press it to open recently opened application window.
back
power
up
Short press [Power] key to turn off the screen when a call is talking.
Press it to open the phone’s menu,then you could choose to lock the screen、
User Manual
5
2 3 1
4.Using Memory Card as U Disk
If you want to send music, pictures or other files to the phone’s memory card from the computer,you
should set memory card as u disk first.
Set memory card as u disk
1) Connect the phone to the computer with USB cable. The notification icon will appear in the status
box.
2) Use USB mobile transmission line will connected to the computer
3) In the notification p anel, touch USB is connected ,And then touch the USB connected as a media
device
Specific shown in the following
figure
(picture 1.2.3.)
User Manual
6
Wi-Fi network
USB debugging
USB for file
available
connected
transfer
User Manual
7
Notice :On the PC operation assistant tool such as mobile phone, Must be open the USB debugging.
5.WiFi
Wifi provides as far as 300feet (100M) range of wireless network access. If you use cell phone to
connect wifi, you should connect to the wireless access point or 「hot spots」.
Notices:The avail ability and covera ge of Wi-Fi signal depend on the number, infrastructure and other
objects penetrated by the signal.
Open Wi-fi and to connect to the wireless network
1) Enter settings.
2) Select the wi-fi box,to open Wi-Fi. Phone will automatically scan for available wireless networks.
3) Touch Wi-Fi settings. Then a list of Wi-Fi network will show the founded network name and security
settings. (open network or WEP、WPA/WPA2 with password).If you enable the notification in Wi-Fi
settings,
4) Touch one of the Wi-Fi choices to connect the network. When you choose open network, phone wil l
connect to it automatically. If you choose WEP、WPA/WPA2 with password, you should type the password
first, then touch to connect it.
Notices:when the phone is connected to the wireless network,
The status box will show this Wi-Fi icon(), and the approximate signal strengthen (the number of
lit bars).If touch the connected network,will display the name of WiFi network, status,speed,signal,
strength, security, information and IP address.
If you want to del ete t he wi reless setti ngs, pleas e t ouch “no t res erve”as i n the ri ght pi cture. If you w ant
to connect to this network, you should re-enter these settings.
Notices:
Unless you choose not to reserve the network, otherwise, there is no need to re-enter the correspondi ng
password when next time connecting to the previously encrypted wireless network. Wi-Fi will search
automatically, that is, phone needn’t to perform additional steps to connect Wi-Fi networks.
User Manual
8
Notices:
Unless you choose not to reserve the network with password, otherwise, there is no need to re-enter the
corresponding password when next time connecting to the previously encrypted wireless network. Wi-Fi
will search automatically, that is, phone needn’t to perform additional steps to connect Wi-Fi networks.
Connect to other Wi-Fi networks
In the interface of wireless and network, touch Wi-Fi settings. The founded Wi-Fi networks will show
on the Wi-Fi network list.
Touch other Wi-Fi networks, and then you can connect to this network.
Notices: in addition, mobile phone can also surf the Internet by GPRS. Our current SIM card GPRS to
open after the default boot. Users can manually choose to open data connection, when for the single card,
direct drop down the status bar, touch "data connection" is open, when for the card, location in "Settings >
SIM card > cellul ar data > select SIM1 or SIM2", t ou ched t he drop-down "data connection" of the status bar
is open the current selected SIM card data connection, and then touch "data connection" close this SIM card
data connection..
6. Bluetooth
Turn on Bluetooth or set the phone can be detected
1) Enter settings.
2) Select Bluetooth box,then open bluetooth box, the status box will show this icon (),then it starts
to scan for all devices within range.
3) Touch Bluetooth settings, all the devices founded will display in the list under the icon.
(bluetooth device is set open and visible to a nearby equipment work, other equipment as long as open
the bluetooth can search to the bluetooth and matching, open as long as the other devices can be detected at
the same time, you can search for other equipment and matching use)
After a paired devices, the system will show the paired and other equipment available
User Manual
9
Pairing and connection of Bluetooth headset
1) Enter settings.
2)Select Bluetooth box,then open bluetooth box, then your phone will scan for the Bluetooth devices
within range ,and show the founded devices in the list under the icon.
Tips:
If the list can’t find your equipment, touch scanning equipment to re-scan it.
Make sure that the devices wanted are under the detected mode.
3) Touch headset in the equipment list to finish the connection.
Notices:generally Bluetooth devices need password to be paired, often use「0000」as the default
password.4)The pairing and connecting status will show under the headset in the Bluetooth devices list.
When the headset connected to your phone, the status box will show this icon()means connected. Then
you can use the headset to make or receive callings.
Cut the connection to the Bluetooth
Press settings>Bluetooth.
In the list of Bluetooth equipment, touch or tap and hold the connected hand-free headset.
Press and select “cancel the pairing”.
Bluetooth proximity sensor
After pairing the two device,you can test out the signal is strong or weak by the Bluetooth proximity
sensor device
User Manual
10
7.Mail
Load Email.
a.Open network connection,
b.In setting the account interface, input the correct email address and password and click next
mobile phone automatically complete the sending and receiving server Settings. Pop-up mail find frequency,
and user Settings interface, complete Settings, click next.
c.For account creation name, the editor of the law that email user name, and click next. Complete
set, synchronous mailbox.
Create and send Email
When creating mails, select mails > create mails. Enter the address(recipient)、theme and contents.
Press MENU you could ‘append’、‘Add Cc/Bcc’, select send or discarded or save as draft.
Check the Email files
Click the inbox to the left of the small buttons, list all the folder options
8.Dialling
When the icon of network serve r appears in the screen, you could dial or receive callings. The signal
bar on the top right corner show the strength of network signal (When the signal with the strongest signal) .
Start dialing
Open application’s main menu>dial >Dial the keyboard. You could choose SIM1 or SIM2 to do the
dialing.
User Manual
11
Dialling
At the dialing Keyboard ,enter the phone number,and then click the dialing key , after that,you should
choose one SIM card or internet call. If needed to call t he extension,you could click the “dial pad” in the
bottom of the screen to open the interface or press menu ke y to select “dela y 2 s econ ds”,and then enter the
number of the extension.
The dialup keyboard input number, click Menu can IP dial-up or speed dial
Video call: video call usually refers to the Internet and mobile Internet based on (3G Internet) end,
through the phone between the speech of the real-time transmission and image (user of bust, phot ographs,
items, etc.) of a way to communicate. Only 3G to support this function. Input a number click video dial-up,
each other answers the phone after both can through camera for video calls.
Telephone calls in the call log
Every telephone number called and received in“SIM1、SIM2”will reserved in phone’s menu of call
log. Each call to record recently will show“SIM1 or SIM2”
All numbers in the call log can be dialed by clicking the button ”dial” on the right side of the screen.
When number list appearing,click it to catch details;press it for long you could dial via “SIM1 or SIM
2”,meanwhile you can edit, delete, save the number or do other operations.
Receive callings
When calling comes(top left will show from which SIM card)press“Answer”and slide towards right
until the middle button, then you can receive callings.
Refuse to answer the phone,
Have a telephone call in, hold down the "call" button to the left sliding contact can decline a call.
Have a telephone call in, hold down the "call" button sliding upwards to contact messages can be
resisted. Choose reject content, the other phone, will receive the corresponding text messages.
User Manual
12
Proximity sensor
According to the distance between phone and human body,it will adjust automatically the switch of the
backlight.
During the call, close the phone to the ear, the backlight will turn off automatically,which could save
batteries and prevent inadvertently touching.
Refuse to answer the phone
When standby, calling comes,press “refuse”button and slide towards left side until the middle button,
then you could refuse the calling.
When using,calling comes,click on the “refuse”button to refuse the calling.
Two-way call/mu lt ip arty call(conference call)
Notices:this function needs that SIM card open multiparty call features.
Already exist a call in the phone
Click“Add calls”,dial another call(or receive another call,phone default open ”call waiting”(settings–dialing settings–other dialing settings),after both connected,could view the status of ca lling.
User Manual
13
Telephone recording
During the call,you could record the dialog of the call.
1)settings>Calling accounts >Call forwarding, set other functions of the call in the dialing settings,for
example:Call Transfer– after all the settings finished and turned on,you could transfer the call to a certain
number.
2)In settings> calling accounts >Additional settings,open “call waiting”.After turned on,you can
receive another call when already exist one,The answering and rejecting functions are just like the ordinary
phone.
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.