ATB3600
Blender
USER MANUAL
PLEASE KEEP THIS USER MANUAL FOR FUTURE USE.
2
USER MANUAL CONTENTS
SAFETY INSTRUCTIONS..................................................................2
PACKAGE CONTENTS..................................................................4
APPLIANCE OVERVIEW................................................................4
BEFORE FIRST USE.........................................................................5
ASSEMBLING YOUR BLENDER......................................................5
USING YOUR BLENDER.................................................................6
CLEANING AND MAINTENANCE.................................................7
OTHERS........................................................................................7
SAFETY INSTRUCTIONS
• Should damages be found on the appliance, its power cord and/or
its other components – do not use the appliance and immediately
bring it to the Aztech Service Center for repair or replacement.
• Do not, in any kind of manner, disassemble, dismantle, and/or perform
appliance repair on your own and/or replace its components using
non-Aztech approved components and/or attachments (e.g.
canning jars, blender blades, etc).
• Do not use the appliance and/or its components for anything other
than its intended purpose. The appliance is intended for household use
only, commercial usage would void the warranty of the appliance.
• Before use, please check if the power voltage of your Blender
correctly corresponds to your home’s power supply.
• Do not use wet hands in operating the Blender and/or in inserting
or removing its power adapter to prevent electrical shocks. It is
recommended to thoroughly dry your hands rst before every use.
• In assembling the appliance, handle each part carefully (e.g. Blender
Blades, Jug) to avoid injuries and/or appliance damage.
• Ensure that all components and/or parts (e.g. blades, Jug Cover,
etc.) are all securely and correctly locked into place before use.
• Do not use the Blender without the Jug cover locked into place.
• If you would be blending hot mixtures and/or ingredients, remove the
inner cap of the Jug Cover.
NOTE: It is STRONGLY ADVISED to ensure that you have read all provided safety
guides and operating instructions in this user manual rst before proceeding.
3
• Ensure to ALWAYS position your Blender on a smooth, dry, and
stable ground. Placing the appliance on unstable surfaces such as
cushioned carpets and/or uneven surfaces may cause the appliance
to lose its balance during operation.
• Do not position the appliance in a humid environment and/
or in places exposed to multiple sources of heat such as stoves,
refrigerators, or ovens. It is also important to keep it away from
ammable/combustible materials such as electric burners, curtains
and/or cloths.
• Do not use the appliance without any food or liquid inside the Jug.
• Keep the appliance out of reach of children. If children are within the
area during use, ensure to operate the appliance with extra care for
safety purposes. Keep its power cord out safely kept away and out of
reach during use to avoid unwanted accidents.
• Keep hands and utensils out of the Jug while blending to reduce risks
of severe injury and/or appliance damage. You may only use utensils
once the Blender is OFF.
• Do not leave the Blender unattended during use. Always unplug the
unit before cleaning and/or after usage.
• Always unplug the power adapter if you are done using your Blender.
• When unplugging its power adapter, do not pull or tug its cord. Hold
the power adapter rmly on its base when unplugging it from the
power outlet. Also, ensure that its power cord is kept away from any
source of heat and/or sharp edges that may cause external damage
to the cord.
• Do not use its power cord to carry the appliance.
• Do not immerse or expose the Blender’s main body and/or its power
cord to water or in any kind of liquid substance.
• Your Aztech Blender is not intended for people with reduced
physical, sensory or mental capabilities, and/or lack of experience
or knowledge. Constant supervision (from a person responsible for
their safety) should be provided if such individuals would be using,
cleaning, or operating, the appliance.
4
PACKAGE CONTENTS
• ATB3600 Blender
• Grinder
• Easy Start Guide
BLENDER COMPONENTS
APPLIANCE OVERVIEW
• User Manual
• Warranty Policy
A. Assembled Jug
B. Main Body
C. Speed Control
Knob
D. Inner Cap
E. Jug Cover
F. Jug
G. Ring
H. Blender Blades
I. Jug Base
A
B
D
E
F
G
H
I
C
5
ASSEMBLING YOUR BLENDER
STEP 1
Insert the Ring (D) into the inner rim of the Blender
Blades (E).
BEFORE FIRST USE
Ensure to thoroughly clean and rinse all parts of the blender (except the main
body) before using the Blender for the rst time (refer to the Cleaning and
Maintenance section of this user manual for more details).
STEP 2
Insert the Blender Blades (with Ring) into the Jug
Base (F).
STEP 3
Mount the Jug (C) on top of the Jug Base (F), then
turn the Jug Base clockwise until it securely holds
the jug in place.
STEP 4
Once assembled, mount the Jug Base into the
Main Body (G). Press it downwards until the Jug
Base is securely locked into the main body.
STEP 5
Place the Jug Cover (B) on top of the Jug, then
insert its Inner Cap (A) in a clockwise manner until
it locks into the Jug Cover.
Ensure that all Blender components are
properly locked into place.
A
B
C
D
E
F
G
6
USING YOUR BLENDER
STEP 1
Open the Jug cover and add in the ingredients that you want to
blend into the jug.
STEP 2
Securely cover the jug with the jug Cover and insert the inner cap (if
removed) in a clockwise manner into the Jug Cover to completely
seal the jug.
NOTE: You may opt to not use the inner cap if the ingredients you
are about to blend are hot.
TIPS IN USING YOUR BLENDER
• To achieve best results in blending solid ingredients, slice the
ingredients into smaller pieces (2-3cm) and slowly add these into
the jug while using the Pulse function. You may also opt to use
the Grinder attachment if the ingredients to be blended are hard
(e.g. walnuts etc).
• When mixing solid ingredients start off rst with a small amount of
liquid. Gradually add more through the opening provided upon
removing the Inner Cap.
• During use, press the Jug Cover to ensure that the Jug is properly
sealed.
• In stirring thick liquid ingredients, you may use the Pulse mode to
prevent the blades from becoming stuck into the mixture.
STEP 3
Select the preferred function or speed using the Speed Control
Knob.
SPEED / FUNCTION SETTINGS
1
For soft ingredients and/or mixtures (e.g. banana,
watermelon, etc).
2
For slightly hard ingredients (e.g. cabbages, celery,
apples etc).
Pulse
For extra hard ingredients (e.g. nuts, ice, coffee beans
etc). The Pulse function, however, requires you turn the
knob to the Pulse function continuously.
STEP 4
Turn the Speed Control Knob to 0 (OFF) and unplug it from the
power outlet.
7
CLEANING AND MAINTENANCE
• Turn OFF and unplug its power adapter from the power outlet before
performing any cleaning, relocation, and/or maintenance.
• Do not immerse or expose the Blender’s main body and/or its power
cord to water or any kind of liquid substance. Simply use a slightly
damp cloth to clean your Blender’s external surface.
• Do not use any abrasive and/or aggressive cleaners in cleaning your
appliance.
• In assembling the appliance, handle each part carefully (e.g. Blender
Blades, Jug, etc.) to avoid injuries and/or appliance damage.
TIPS IN CLEANING YOUR BLENDER
QUICK CLEANING
Use your Blender’s Quick Cleaning feature if you plan to use your appliance
again for another set of ingredients.
1. Dislodge the Jug from the Main Body.
2. Empty the Jug and ll with it water then cover it using the Jug Cover.
3. Securely attach the Jug to the Main Body again.
4. Use the Pulse function to rinse the Jug’s internal surface. Repeat this
step until its internal surface is clean.
5. Discard the water used.
THOROUGH CLEANING
To thoroughly clean your blender after use.
1. Disassemble the jug and its components from the main body. Ensure to
handle each component with care (e.g. Blender Blades) to avoid risks
of injury during cleaning.
2. You can wash all of the removed components except for the Main
body.
3. Dry each component using a soft dry cloth.
OTHERS
USING THE GRINDER ATTACHMENT
Your Blender comes with an optional Grinder attachment. This is best used
for grinding harder ingredients (e.g. walnuts, coffee beans, etc). To maximize
grinding results, use this attachment with the Pulse Function.
Copyright © 2016 Aztech Technologies Pte Ltd (CRN:199800635M ). All rights reserved.
Loading...