Aztech AHB6600 User Manual

AHB6600
Hand Blender
USER MANUAL
PLEASE KEEP THIS USER MANUAL FOR FUTURE USE.
2
USER MANUAL CONTENTS
SAFETY INSTRUCTIONS..........................................................................3
USING THE HAND BLENDER..................................................................5
APPLIANCE OVERVIEW........................................................................5
CLEANING AND MAINTENANCE..........................................................6
SAFETY INSTRUCTIONS
NOTE: It is STRONGLY ADVISED to ensure that you have read all provided safety
guides and operating instructions in this user manual rst before proceeding.
Should damages be found on the appliance, its power cord and/or its other components – do not use the appliance and immediately bring it to the Aztech Service Center for repair or replacement.
The Blender Rod’s blades are very sharp. ALWAYS handle it with care. Ensure that the Hand Blender is unplugged from the power outlet before assembling and/or removing attachments.
Before use, please check if the power voltage of your Hand Blender correctly corresponds to your home’s power supply.
Do not, in any kind of manner, disassemble, dismantle, and/or perform appliance repair on your own and/or replace its components using non-Aztech approved components and/or attachments.
Do not use the appliance and/or its components for anything other than its intended purpose. The appliance is intended for household use only, commercial usage would void the warranty of the appliance.
Do not use wet hands in inserting or removing its power adapter to prevent electrical shocks. It is recommended to thoroughly dry your
hands rst before every use.
Do not position the appliance in a humid environment and/ or in places exposed to multiple sources of heat such as stoves, refrigerators, or ovens. It is also important to keep it away from
ammable/combustible materials such as electric burners, curtains
and/or cloths especially during use.
Do not let its power cord hang over edges of table and/or touch hot surfaces which may damage the appliance nor use its power cord in carrying the appliance.
3
Always unplug the unit before cleaning and/or even after usage. Also, keep the appliance away from children.
Keep the appliance out of reach of children. If children are within the area during use, ensure to operate the appliance with extra care for safety purposes. Keep its power cord safely kept away and out of reach during use to avoid unwanted accidents.
Your appliance’s maximum operation duration WITHOUT ANY INGREDIENTS SHOULD NOT EXCEED 15 SECONDS. On the other hand, max operation duration WITH INGREDIENTS SHOULD NOT EXCEED 30 SECONDS. Ensure a 3-minute rest period after two (2) consecutive cycles.
The appliance should not be used in crushing ice and/or blending hard and/or dry substances. This can damage your Hand Blender’s blade.
Before use, ensure that the Blending Rod is properly attached and securely locked into place.
To reduce the risks of injury, do not attach the blending rod into the
main body without rst placing a bowl properly in place.
During use, keep hands and utensils away from the bowl or container used to avoid injuries. If stirring is required, simply turn OFF the appliance, stir, and turn ON the appliance again to resume usage.
When unplugging its power adapter, do not pull or tug its cord. Hold
the power adapter rmly on its base when unplugging it from the
power outlet. Also, ensure that its power cord is kept away from any source of heat and/or sharp edges that may cause external damage to the cord.
Do not immerse or expose your Hand Blender’s main body and/or its power cord to water or any kind of liquid substance.
Your Aztech Hand Blender is not intended for people with reduced physical, sensory or mental capabilities, and/or lack of experience or knowledge. Constant supervision (from a person responsible for their safety) should be provided if such individuals would be using, cleaning, or operating, the appliance.
4
PACKAGE CONTENTS
• AHB6600 Hand Blender
• Easy Start Guide
• User Manual
• Warranty Policy
APPLIANCE OVERVIEW
1
2
3
1. Speed Control Dial
2. Low Speed Button
3. Turbo Button
4
5
4. Rod Lock
5. Blender Rod
USING THE HAND BLENDER
TIPS IN USING YOUR HAND BLENDER
Before use, please check if the power voltage of your Hand Blender
correctly corresponds to your home’s power supply.
Your appliance’s maximum operation duration WITHOUT ANY
INGREDIENTS should not exceed 15 seconds. On the other hand, max operation duration WITH INGREDIENTS should not exceed 30 seconds. Ensure a 3-minute rest period after two (2) consecutive cycles.
The Blender Rod’s blades are very sharp. ALWAYS handle it with care.
Ensure that the Hand Blender is unplugged from the power outlet
before assembling and/or removing attachments.
Ensure that the Blender Rod is securely locked in place before use.
Do not use your Hand Blender in crushing ice and/or blending hard
and/or dry substances. This can damage your Hand Blender’s blade.
STEP 1: Assemble the Blender Rod
Fasten the Blender Rod into the Main Body counter clockwise until the Blender Rod is securely locked in place.
5
STEP 2: Plug it in
Plug your Hand Blender’s power adapter into a power outlet.
STEP 3: Lower and Select Function
Lower the Hand Blender into the bowl, then press and hold the Low Speed Button or Turbo button to start blending. You can also adjust the selected speed through its Speed Control Dial by turning it clockwise or counter clockwise.
NOTE: The Speed Control Dial will not function if you are already using the Turbo speed.
STEP 4: Stop Function
Release the pressed speed button to stop operation.
CLEANING AND MAINTENANCE
QUICK CLEANING
Between cycles, simply dip the the Hand Blender’s blades into a bowl of water and turn it ON for a few seconds to quickly rinse its blades. This is useful if you plan to blend multiple kinds of smoothies.
CLEANING YOUR HAND BLENDER
TIPS IN CLEANING YOUR HAND BLENDER
Do not immerse the Main Body in any kind of liquid.
Handle the appliance carefully to avoid injuries, especially in
disassembling / assembling the appliance.
1. Unplug your appliance’s power adapter and detach the Blender Rod.
2. Rinse the Blender Rod under running water without using any detergents and/or abrasive cleaners.
3. After rinsing, position the Blender Rod in an upward manner (with the blades facing up). This is to drain out any water which may have gotten inside the Blender Rod.
4. As for the Main Body, use a dry cloth to wipe off any food stuck on its surface.
6
7
Copyright © 2016 Aztech Technologies Pte Ltd (CRN:199800635M ). All rights reserved.
Loading...