Azio AWD154A User Manual

Wireless 54Mpbs PCI Adapter

User’s Manual

(For SOHO Users)

APRIL 2007

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communication. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

- Consult the dealer or an experienced radio/TV technician for help. the receiver is

connected.

FCC Caution: Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of

about eight inches (20cm) between the radiator and your body.

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

No part of this document can be copied or reproduced in any form without written consent from

the company.

Trademarks:

All trade names and trademarks are the properties of their respective companies.

Revision History

V1.1 Second Release

Contents

1. Instruction...................................................................... 4

1.1 Features ......................................................................... 4

1.2 Package Contents........................................................... 4

1.3 LED Indicator ................................................................. 4

2. Install Driver & Utility..................................................... 5

2.1 For Windows Vista.......................................................... 5

2.2 For Windows XP and 2000............................................ 11

2.3 For Windows ME and 98SE ........................................... 18

3. Wireless Network Configuration Utility ......................... 25

3.1 General......................................................................... 25

3.2 Profile .......................................................................... 25

3.3 Available Network ........................................................ 26

3.4 Advanced ..................................................................... 28

3.5 Status........................................................................... 29

3.6 Statistics ...................................................................... 29

3.7 Easy Config................................................................... 30

3.8 RT-Set .......................................................................... 30

4. Glossary........................................................................ 31

1. Instruction

Congratulations on purchasing this Wireless 54Mbps PCI Adapter. This Wireless PCI Adapter

is designed to comply with IEEE 802.11g Wireless LAN standard and it is suitable for any

laptop computers and provides maximum data transfer rate up to 54 Mbps. It provides up to a

128-bit level of WEP security to your wireless data transfers. The wireless PCI adapter comes

with software drivers for the most popular Microsoft Windows operating systems and can be

integrated into a larger network, running Windows Vista/XP/2000/Me/98SE in either Ad-Hoc

mode (without an access point or router) or Infrastructure mode (with an access point or

router), the configuration of your working environment, or the capabilities or limitations of your

computer systems.

1.1 Features

‧ Up to 54Mbps data transfer rates

‧ Supports 64/128-bit WEP data encryption function for high level of security

‧ Supports WPA-PSK advanced WLAN security

‧ Supports Infrastructure mode

‧ Supports Ad-Hoc mode (peer-to-peer communication among any wireless users, no

Access Point required)

‧ Supports automatic fallback increase data security and reliability

‧ Supports Power Save mode

‧ Compliant with PCI v2.2

1.2 Package Contents

‧ One Wireless PCI Adapter

‧ One Detachable Antenna

‧ One CD disk includes driver, utility and user’s manual

1.3 LED Indicator

LED Light Status Description

Flashing Wireless LAN has Activity (ACT) data being sent. ACT / LINK

Wireless LAN has been activated.

2. Install Driver & Utility

Note: If you have installed the Wireless PCI Card driver & utility before, please uninstall

the old version first.

2.1 For Windows Vista

Step1: Turn off the computer and insert the Wireless PCI card into the PCI slot of your

computer. After restart the computer, insert Wireless 54Mbps PCI Adapter Installation CD into

CD-ROM drive then windows below will appear. Click Install Driver & Utility to begin device

driver installation.

Step2: Setup wizard will begin to configure the device driver.

Step3: Please wait for while during searching for hardware and installing drivers.

Step4: Setup has finished installing Wireless LAN Driver on your computer, click “Finish” to

exit the setup wizard.

Step5: To check if Wireless PCI card is properly installed, you can right-click Computer

Æ choose Properties Æ click Device Manager.

[Configure your Wireless LAN Card]

Step6: Go to Start Î All Programs Î Control Panel.

Step7: Click “Networking and Sharing Center”.

Step8: Click “Connect to a network” to search an available network connection.

Step9: Select a network to connect to and click “Connect”.

Step10: Enter the security key or pass phrase for network connection if it is necessary.

Step11: Wait for while for network connecting.

Step12: After network connection is successfully built, click “Close” to exit the setup.

Step13: Back to Networking and Sharing Center section, you will see your network is

connected. And now you can browse your Internet Explorer to surfing the web.

+ 24 hidden pages