Page 1
Specication
Operating Input Voltage 5VDC/1.5A
Power Factor >0.4
Power Consumption 8W
Operating Temperature 0 to 40 °C
Storage Temperature -40 to 80 °C
Operating Humidity >90% (RH)
Weight 680g (excluding adapter)
Luminous Flux 200lm
Color Temperature 3000K
Color Rendering Index >80
Battery Charging Time Approx. 2hrs
Environment:
This product contains rechargeable battery. please do not dispose of the product in the household waste at the end of its useful life.
Disposal can take place at approved recycling or disposing locations in accordance with local regulations. The battery must be removed
from the appliance before it is scrapped and the appliance must be disconnected from the supply mains when removing the battery.
Warning:
This product is for indoor use only.
It is normal that the unit will generate a small amount of heat during charging.
The light source contained in this product shall only be replaced by the manufacturer or his service agent or a similar qualied person.
Note:
Having the lamp turned on while charging will not aect the function of the lamp. However, the battery can be fully charged more
quickly when the light is turned o.
MONO
DBL200
LED Lamp
Tel: (65) 6594 2277 www.azelite.com Fax: (65) 6749 1198
User Guide
Page 2
Items in the box
Wireless charging for mobile device
DBL200
(Charging base)
DBL200
(Lamp)
Wireless charging for DBL200
1 Connec t the USB plug of the
adapter to t he terminal found
on the char ging base, then
connec t adapter to power
outlet . Position the lamp
onto the cent er location of
the charging base.
2 The base w ill sound out a
Micro USB Cable
BEEP
“Beep” a nd a blue light will
emit from t he power button .
This indi cates that the lamp
batter y is connected a nd
charging is in progress.
or
or
AC Adaptor
(Regional)
3 When the ch arging base
detec t that the batter y level
is full, th e blue light will
cease to emi t.
1 Connec t the USB plug of the
adapter to the terminal found
on the char ging base, then
connec t adapter to power
outlet. Place the mobile device,
that is Qi wireless charging
compatib le, onto the center
locatio n of the charging ba se.
Adjusting brightness
1 Pressing t he power button
once will tu rn on the lamp.
It will ligh t up in the
brightest setting.
BEEP
2 The base w ill sound out a
“Beep” i ndicating that th e
device bat tery is connec ted
and charging is in progress.
2 To dim the light, p ress and
hold the p ower button
while in th e brightest
settin g. The light will
continue to d im until you
see the li ght blink once,
indicat ing that you have
reached t he dimmest state .
3 When the ch arging base de tect
that the bat tery level is fu ll,
charging will automatically
stop to pre serve the bat tery
life of the m obile device.
3 To increase the b rightness of
light, pr ess and hold the
power but ton while in the
dimmest setting. The lig ht
will conti nue to brighten unti l
you see the l ight blink once,
indicating that you have
reached t he brightest st ate.
Loading...