Azden FMX-22 Data Sheet

Page 1
FMX-DSLR
2-Channel Portable Mixer/Adapter for DSLR Cameras
The all new FMX-DSLR is a professional low noise audio mixer designed for DSLR cameras. With the same advanced low noise, wide response circuitry as our top-of-the-line mixers, the
FMX-DSLR is designed to meet the specific needs of professional DSLR users.
LEFT SIDE (Input / output)
MainFeatures
Can be aached to a camera or tripod with the integral thread.Switchable AGC circuit for noiseless operaon.2 XLR microphone inputs with individual level controls and
switchable phantom power
Stereo mini jack microphone input and mini jack line level inputStereo mini plug microphone output and headphone outputInput return funcon (RTN) to monitor camera audioLED peak level indicatorsOperates on 4 “AA” baeries
Control switch part
SPECIFICATIONS
Input LINEMIC-1
MIC-2
AUX RETURN
Input level Gain LINE/AUX  LO LINE/AUX  HI MIC-1/MIC-2 LO MIC-1/MIC-2 HI RETURN -
Output Unbalanced output Monitor output
Max. output level Unbalanced output
200 Valley Road, Suite 101, Mt. Arlington, NJ 07856, (973)810-3070, FAX (973)810-3076 e-mail: sales@azdencorp.com, web site: www.azdencorp.com
XLR-3P(Female) x2 (CH L,CH R)
φ3.5 stereo mini jack φ3.5 monoral mini jack
RCA stereo pin jack
Max input +22dBu +6dBu 0dBu
-16dBu 0dBu
φ3.5stereo mini jack φ3.5stereo mini jack
0 dBu (Loading 2kΩ)
Max gain
-22dBu
-6dBu 0dBu +16dBu 25dBu
input impedance 19kΩ/10kΩ 19kΩ/10kΩ 2kΩ/2kΩ 2kΩ/2kΩ 8kΩ
Monitor output Output impedance Camera AGC operaon disable signal Phantom power source
Total Performance
Frequency response
Frequency response Noise level (MIC 1,GAIN HI) Distoron
Power Power consumpon
Connuous baery operaon me Dimensions Weight
*Specificaon is subject to change without prior noce.
(LINE/MIC-1/AUX) (Monitoring out)
-3.5 dBu(Loading 32Ω 56Ω 20kHz, -50dBu(DISABLE MODE :ON) 48±2V
20-30,000Hz(+0/-1dB or less) 50-20,000Hz (+0/-1dB or less)
-118dBu (GAIN +16dB A weighted)
0.008% or less (-3dBu output) AA batteries x 4 pcs
16mA
(Voltage 5V, No signal input, Phantom Off)
64mA
(Phantom On, 1 microphone use)
Approx.
15 hours 105(W)x105(D)x44(H) mm Approx 470g (include batteries)
(withAAAlkaline batteries)
Voltage 5V
)
Page 2
FMX-22
2-Channel Portable Mixer for videography
The FMX-22 is a portable battery operated (4-“AA”) mixer and has the following features: 2 XLR microphone inputs each with Hi/Lo input settings, 2 input level controls, master level control, switchable phantom power and limiters for each input, channel-addressable (L-C-R) Stereo XLR and mini outputs, 5-step LED array for easy signal monitoring, 12V DC input for external power (optional BC-27 power supply), and a 1/4" monitor headphone jack with level control.
Control switch part
RIGHT SIDE (output)
SPECIFICATIONS
Input MIC (Electric balance input)
CH 1,CH 2 MIC LO
CH 1,CH 2 MIC HI
Output CH L, CH R Unbalanced output Monitor output
Max. output level CH L, CH R Unbalanced output Monitor output
200 Valley Road, Suite 101, Mt. Arlington, NJ 07856, (973)810-3070, FAX (973)810-3076 e-mail: sales@azdencorp.com, web site: www.azdencorp.com
XLR-3P(Female) x 2 (CH 1,CH 2)
Max input
-21dBu
-5dBu
XLR-3P(male) X2
φ3.5stereo mini jack φ6.3stereo jack
+15 dBu (Loading 5kΩ)
-20 dBu (Loading 2kΩ) +1.5 dBu (Loading 32Ω )
Max gain +58dB +42dB
input impedance 2kΩ 2kΩ
Total Performance Frequency response (CH L, CH R Noise level (MIC 1,GAIN HI) Distortion
Phantom power source
Power Power consumption
Continuous battery operation time Dimensions Weight
Specification is subject to change without prior notice.
)
20-20,000Hz(+0/-0.5dB or less)
-119dBu (GAIN +58dB A weighted)
0.005% or less (+14dBu output at 1kHz) 48±1.5V External input DC 12V /AA batteries x 4 pcs
77mA
(Voltage 9V, No signal input, Phantom Off)
118mA
(Voltage 9V,Phantom On, 1 microphone use) 66mA(External input Approx.15hours (withAAAlkaline batteries,Phantom Off) 145(W)x120(D)x53.5(H) mm Approx 670g (exclude batteries)
12V, No signal input, Phantom Off)
Loading...