Azden APS 25 Specifications

Page 1
APS 25
A
Multi-Function / Multi-Purpose
Powered Speaker System
• High-impact injection-molded ABS case
• Master Volume control
• Anti-feedback tone control
• 2 user-installable wireless module slots
• Signal-sensing auto-on circuit
• Table, stand or wall mountable
• Magnetically shield woofer
• Wide dispersion tweeter
• 115 / 220VAC user-switchable
• Two-year warranty
- SPECIFICATIONS -
Rated Power 20 watts continuous Frequency Response 65Hz – 18kHz Max SPL @ rated output 101dB @ 1 meter
Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1 Tone Control -6dB/octave sliding lowpass (3kHz to 8kHz)
Wireless inputs 2 user-installable receivers VHF (169-213MHz), UHF (794-806MHz) and/or Infrared
Wired inputs/output Mic -81dBV (0.089mV 100KΩ unbalanced, ¼" phone jack, variable Line -40dBV (10mV 10KΩ unbalanced, RCA jack, variable Line-Out +15dBV max - RCA jack
Weight 8.25 lb (3.74kg) approx. w/out receivers Dimensions 12.4"H x 7.09"W x 5.6"D (315 x 180 x 142mm) Compliance UL, C-UL, and FCC approved
C Power Requirements User switchable: 110-125 / 210-240VAC - 50Hz / 60Hz
Included w/speaker Removable wall-mount bracket, removable right-angle AC cord, 4 anti-skid pads
st
order passive @ 8kHz
RMS) for 1 watt
) for 1 watt
RMS
AZDEN Corporation, P.O. Box 10, 147 New Hyde Park Road, Franklin Square, NY 11010-0010
516.328.7500 [vox] • 516.328.7506 [fax] • azdenUS@azdencorp.com [email] • www.azdencorp.com [on the web]
- Specifications subject to change without notice -
Loading...