A.Y. McDonald Plumbing Products User Manual

Plumbing Products
2/17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
Table of Contents
Page
Mission Statement ..................................... 4
Customs & Freight ........................... 5-6
Trade Customs ............................................ 5
Return Goods .............................................. 5
Limited Warranty.......................................... 5
No-Lead Warning ......................................... 5
Freight Program ........................................... 6
Non-Potable Bronze Gas Plug Valves
Non-Potable
Square Head Plug Valve ............................... 8
Lever Handle Plug Valve ............................... 8
Use Only
Flat/Tee Head Plug Valve ............................. 8
Non-Potable Iron Gas Plug Valves
Non-Potable
Flat Head Tamperproof ................................ 9
Use Only
Square Head Wrenches................................ 9
Non-Potable
Steam Stops
Non-Potable
Square Head Plug Valves less Check ......... 10
Square Head Plug Valves with Check ......... 10
Use Only
Non-Potable
Specialty Valves
Throttle Gate Valves ................................... 11
Non-Potable
Lock Lever Barrel Faucet ............................12
Use Only
Utility Fill Cap & Vent.................................12
No-Lead
Specialty Valves
Tee Head Plug Valve ...................................14
Stop & Drain Plug Valves ........................... 14
In-Line Dual Check Valves .......................... 14
No-Lead Full Port Ball Valves .......... 15
Full Port Ball Valves ................................... 15
Press Fit Ball Valves ..................................15
No-Lead Specialty Ball Valves ...15-17
Pex Ball Valves ..........................................16
Repair Handles .......................................... 17
Expansion Pex Ball Valves .......................... 17
A.Y. McDonald Mfg. Co. ..................... 4
...................... 8
........................... 9
...................................... 10
............................ 11-12
................................. 14
Page
No-Lead Low Pressure Valves .... 18-24
Hose Bibb .................................................. 18
Garden Hose Bibb ..................................... 18
No-Kink Hose Bibb .............................. 18-19
Angle Sillcock ............................................ 19
Boiler Drain ............................................... 20
Gate Valves .......................................... 20-21
Stop Valves .......................................... 21-22
Angle Stop Valves ...................................... 22
Swing Check Valves ................................... 22
Bronze & Iron Y-Strainer ............................ 22
In-Line Check Valves .................................. 22
Anti-Sweat Valves ...................................... 22
Bronze Foot Valves .....................................23
Vacuum Breaker ........................................ 23
Frostproof Sillcocks ............................. 23-24
Repair Handles .......................................... 24
No-Lead Quarter Turn Chrome
Supply Stops ................................. 25-29
Angle Quarter Turn Supply Stops ......... 25-26
Loose Key Supply Stops ....................... 25-28
Straight Quarter Turn Supply Stops ...... 27-28
Expansion Pex Supply Stops ................ 25-28
Transition Supply Stops .............................28
Icemaker Supply Stops .............................. 29
Dual Outlet Supply Stops .................. 26 & 29
Washing Machine Valves ...................... 28-29
Stainless Steel Supply Hoses ....... 30
Stainless Steel Supply Hoses ..................... 30
No-Lead Specialty Valves / Fittings
........................................................ 31-33
Drop Ear Elbows ........................................ 31
Pressure Relief Valve ........................... 31-32
Washing Machine Valves ............................ 32
Dielectric Union ......................................... 32
Ductile Iron Meter Flange Kit ..................... 32
Meter Coupling .......................................... 32
Supply Hoses ............................................. 32
Pressure Reducing Valves .......................... 33
No-Lead Press Fit Fittings & Valves
........................................................ 34-36
Couplings, Adapters, & Caps .....................34
Unions & Tees ............................................35
45º & 90º Elbows .............................. 35-36
Press Fit Ball Valves ..................................36
No-Lead Push-Fit Valves &
Fittings ........................................... 37-40
No-Lead Push Fit Ball Valves .....................37
No-Lead Brass Push-Fittings ................ 37-38
Chrome Supply Stops ................................ 38
Wrot Copper Push-Fittings ................... 39-40
Stainless Steel Water Heater
Hose Connectors .......................................38
Push Fit Release Tools ...............................38
2
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
Table of Contents
Page No-Lead Sump & Sewage
Check Valves
Full Flow Sump Check Valves ..................... 41
Union Check Valve ..................................... 41
Silent Union ............................................... 41
Union Swing Check Ball Valve Combo ........ 41
Compression Swing Check ......................... 42
Silent/Clear Compression ......................... 42
................................. 41-42
No-Lead PVC / CPVC Valves &
Fittings ................................................ 43
PVC Ball Valves .......................................... 43
CPVC Ball Valves ....................................... 43
PVC Unions ................................................ 43
Transition Fittings ...................................... 43
No-Lead Pex Fittings & Valves ... 44-54
Poly Pex Fittings ........................................ 44
Couplings ..................................................45
Plug & Tee ................................................. 46
Elbow / Swivel Elbow................................. 47
Pex Ball Valve w/Drain ..............................48
Pex Ball Valve - Heavy Pattern ....................48
Angle Sillcock ............................................ 48
Boiler Drain ............................................... 49
Expansion Pex ...................................... 50-51
Chrome Supply Stops .......................... 52-53
Pex Manifolds ............................................ 54
Pex Stub-Out Elbows .................................. 54
Page No-Lead Tank Tees &
Insert Fittings
Tank Tees Packages ................................... 62
Bronze Tank Tees .......................................63
Bronze Hydrant Elbow ................................ 63
Insert x Insert ...................................... 64-65
Bronze Insert Fittings ........................... 64-65
Galvanized Male Adapter ........................... 65
Galvanized Insert Coupling ........................ 65
Stainless Steel Insert ........................... 64-65
Insert Ball Valve.........................................65
Pitless Adapter .......................................... 65
All Stainless Steel
Hose Clamps
All Stainless Steel Hose Clamps ................ 66
Non-Potable Full Port &
Specialty Valves
Full Port Ball Valves ................................... 68
Full Port Flange Ball Valves & Kits ............. 68
Gate Valves ................................................ 68
Boiler Drain ............................................... 68
Non-Potable Handles ....................... 69
Cross Handles ........................................... 69
Gate Valve Handles .................................... 69
Replacement Handles ................................ 69
............................... 62-65
...................................... 66
................................. 68
Non-Potable
Use Only
Non-Potable
Use Only
Pex Tools & Accessories ............ 55-56
Crimp Tools ................................................ 55
Angle Crimp Tools ...................................... 55
Crimp Tool - Composite Handle .................55
Screw Driver Crimp Kit ............................... 55
Crimp Tool Kit ............................................ 55
Crimp Ring Cutter ...................................... 55
Ratchet Tool - Oetiker Clamps....................56
Oetiker Pex Clamp ..................................... 56
Copper Crimp RIng .................................... 56
Pex Tube Cutter ..........................................56
No-Lead 125# Threaded
Fittings/Pipe Nipples
Nipples ................................................ 57-58
Chrome Plated Nipples .............................. 58
Brass Caps, Cored, & Solid Plugs ..............59
Brass Couplings, Flanges, & Unions ...........60
Brass Tees & Crosses ................................60
Elbows ................................................. 60-61
................. 57-61
Non-Potable Forged Brass
Gas Ball Valves
Gas Ball Valves .................................... 70-71
Square Head Gas Ball Valves ..................... 70
Log Lighter Valves ...................................... 71
............................. 70-71
Non-Potable Radiator Valves .......... 72
Steam/Water Angle Valves ........................72
Hot Water Angle Valves .............................. 72
Steam Radiator Gate Valves ...................... 72
Convector Steam Angle Valves ................... 72
Union Elbows ............................................. 72
Balancing Valves........................................72
Non-Potable 125# Threaded
Fittings
Brass Caps, Solid Plugs ............................. 73
Brass Couplings ......................................... 73
Brass Tees, Elbows ............................... 73-74
Clean out plugs ......................................... 73
........................................... 73-74
Non-Potable
Use Only
Non-Potable
Use Only
Non-Potable
Use Only
2-17
3
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co. is a leading manufacturer of Water Works Brass, Plumbing Valves, Pumps and Water Systems, and High Pressure Gas Valves and Meter Bars. The Company has distinguished itself with a proud tradition of quality and reliability since its founding in 1856.
MISSION STATEMENT
The mission of A.Y. McDonald Mfg. Co., in the words of our founder, is "to make good products and sell them honestly." We, the stockholders and employees, accomplish this by extending the McDonald family culture through excellent customer service and by focusing on our customers' needs.
PEOPLE
A.Y. McDonald Mfg. Co. has a long tradition of trusted quality and dependable service, and it’s thanks to the committed people who work here. Every employee is challenged to look for ways to improve our products or our processes and look to exceed our customer’s expectations on a daily basis.
Customers like to buy from A.Y. McDonald Mfg. Co. because?
* The customer is the boss, and every effort is exerted to exceed expectations.
* Customer service is the number one priority.
* Customers nd quality products and work with outstanding people.
DEVELOPMENT
The latest design manufacturing technology and product research and development are continually at work at A.Y. McDonald Mfg. Co. Our engineers design using PRO/E 3-D modeling and CADKEY software. State-of-the art CAD/CAM equipment is used throughout our plants to produce products to the most precise specications and tolerances. Research and development is a primary focus as we seek to not only meet and exceed our customers' current needs, but also anticipate future industry trends.
A.Y. McDonald Mfg. Co. continues to be committed to the industries it serves by investing the necessary capital expenditures to continually meet the evolving needs of our customers.
FACILITIES
A.Y. McDonald Mfg. Co. Corporate headquarters, brass foundry and main manufacturing plant are located in Dubuque, Iowa. We also have locations in Albia, IA; Elizabethton, TN; and Sparks, NV.
4
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
Trade Customs
CONTROLLING PROVISIONS: These terms and conditions supersede all previous
terms and conditions and shall control any sale by A.Y. McDonald Mfg. Co. (“Seller”). No alteration or waiver of these terms and conditions shall be valid unless specically accepted in writing by an authorized representative of Seller.
PRICES: Billing prices are those in effect at the time the order is shipped. All prices are subject to change without notice. Possession of a price sheet shall not be construed as an offer to sell. Seller reserves the right to reject any order.
TERMS: 2% 10th Prox., Net 25th (A 2% cash discount can be taken on the 10th of the month following the shipment. The month is dened as the 26th through the 25th. For example, a February 25th invoice is due 2% on March 10th, a February 26th invoice is due 2% April 10th, and all invoices are due net the 11th and considered past due on the 26th of the month). Without open credit terms, payment may be required prior to shipping. A 2% monthly service charge (or the maximum amount permitted by law) may be applied to the balance of any past-due invoice. Buyer shall pay any necessary collection fees, including reasonable attorney fees.
TAXES: Any sales tax, use tax, manufacturer tax, duty, or other cost imposed by any government entity shall, at Seller’s option, be added to the purchase price and payable by buyer. Buyer must certify any tax exemption and agree to indemnify Seller against any tax imposed contrary to such certication.
FREIGHT: All prices are F.O.B. Seller’s factory, with full freight allowed within the contiguous United States and Canada on the orders that qualify pursuant to the Freight Program schedule. Seller reserves the right to select the carrier and route of shipment and to ship at the most economical rate. All extra charges for special handling or delivery services will be paid for by the buyer. Terms for shipment outside the contiguous United States and Canada shall be established on a case-by-case basis.
LIMITED WARRANTY Subject to the limitations stated herein, A.Y. McDonald Mfg. Co. (“Seller”) warrants that plumbing products manufactured by Seller shall be free from defects in material and workmanship and shall perform the services for which they are intended when properly installed, under normal use, and under ordinary conditions, for a period of one (1) year from the date of shipment from Seller’s factory. This Limited Warranty does not cover or apply to water service products, high pressure gas products, or pumps or pump accessories manufactured by Seller. Buyer must notify Seller in writing of a potentially defective product as soon as possible and not later than one (1) year from the date of shipment from Seller’s factory. Upon receipt of such notice, Seller shall, at its option and at its expense, examine such product at Seller’s factory or such other location as Seller shall determine. Should Seller agree to a return of the product, buyer shall follow in every respect the packaging and transportation instructions provided by Seller. In no case shall a product be returned without rst obtaining the permission of Seller. If a product is proven to the satisfaction of Seller to be defective, then Seller shall, at its option and at its expense, repair or replace such product or reimburse buyer for the price paid by buyer for such product. The cost of shipping to buyer a repaired or replaced product shall be paid by Seller on the same shipping terms as the original shipment of such product to buyer. Except as stated herein, buyer shall assume all responsibility and expense for any dismantling, removal, reinstallation, and shipping in connection with this Limited Warranty, and no claims will be allowed for labor, shipping, materials, or other costs incident to the repair, replacement, or return of a product.
THIS LIMITED WARRANTY IS THE ONLY WARRANTY PROVIDED BY SELLER AND IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SELLER’S LIABILITY IS LIMITED TO REPAIR, REPLACEMENT, OR REIMBURSEMENT AS PROVIDED ABOVE, AND IN NO EVENT SHALL SELLER’S LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT(S) INVOLVED. THIS LIMITED WARRANTY PROVIDES THE EXCLUSIVE REMEDY AGAINST SELLER FOR CLAIMS RELATING TO PRODUCTS, WHETHER IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE), OR UNDER ANY OTHER LEGAL THEORY, AND WHETHER ARISING OUT OF WARRANTIES, REPRESENTATIONS, INSTRUCTIONS, OR DEFECTS FROM ANY CAUSE. IN NO EVENT SHALL SELLER BE LIABLE FOR OR OBLIGATED TO PAY ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES OF ANY KIND.
THIS LIMITED WARRANTY EXTENDS ONLY TO BUYERS WHO PURCHASE SELLER’S PRODUCT(S) DIRECTLY FROM SELLER (“ORIGINAL PURCHASERS”), INCLUDING DISTRIBUTORS, WHOLESALERS, UTILITIES, AND CONTRACTORS. THIS LIMITED WARRANTY IS NOT ASSIGNABLE OR OTHERWISE TRANSFERRABLE BY THE ORIGINAL PURCHASER TO ANY OTHER PARTY. SELLER EXTENDS NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO “CONSUMERS,” AS THAT TERM IS DEFINED IN THE MAGNUSON-MOSS WARRANTY ACT (15 U.S.C. SECTIONS 2301 ET SEQ.) AND THE REGULATIONS PROMULGATED THEREUNDER. IN NO EVENT SHALL THE DURATION OF ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE BE LONGER THAN THE ONE (1) YEAR PERIOD PRESCRIBED HEREIN.
This Limited Warranty shall not apply to product failure or defect: due to a defect in the design, engineering, or installation of any water, gas, or other system; where the product has been modied without the prior written authority of Seller; caused by the failure to install or use the product in conformity with any instructions or specications provided by Seller; caused by the improper installation, use, application, maintenance, repair, transportation, handling, or storage of the product; caused by the fault or negligence of anyone other than Seller or any other act or event beyond the control of Seller. Seller makes no warranties as to any products or product parts or components that are not manufactured by Seller. The limitations of liability contained in this Limited Warranty shall be effective without regard to Seller’s performance or failure or delay of performance under any other term or condition of any trade customs, warranty, or other agreement. No employee, representative, or agent of Seller, nor any other person, has authority to assume or incur on behalf of Seller any liability, obligation, or responsibility in place of or in addition to this Limited Warranty.”
CLAIMS: Inspect all shipments immediately upon receipt, examining products for damage and verifying quantity. Any claim of damage, shor tage, or non-conformance must be made in writing within 5 business days of receipt of goods (any claim of damage or shortage must be noted on the Freight Carrier’s signed delivery receipt).
ORDERS: Seller is not responsible for and shall not be held liable for damages resulting from delays or failures in shipment, nor shall Seller be liable for any delay or failure to provide goods where occasioned by any force majeure event, including without limitation: strikes and other labor disputes; res; acts of God; oods, snowstorms, tornados, and other storms; unusually severe inclement weather conditions; fuel, energy, carrier, or material shortages or embargoes; war; terrorism; civil disturbances; acts of civil or military authority; court order or decree; partial or complete destruction of factor y or other facility; acts of buyer; inability to obtain or retain fuel, energy, carriers, materials, facilities, or labor without litigation or the payment of penalties or unreasonable prices or the acceptance of unreasonable terms and conditions; and any other cause beyond Seller’s control.
RETURNS: Goods cannot be returned without the prior written approval of Seller. Return freight must be prepaid by buyer. After inspecting the returned goods, Seller may impose upon buyer: (1) a handling and restocking charge equal to a minimum of 25% of the invoiced cost of the returned goods; and, in addition thereto, (2) any costs required to put the goods in like-new condition. All credit memos are subject to cash discount terms as dened in our standard terms.
CANCELLATION: The contract resulting from Seller’s acceptance of Buyer’s order cannot be cancelled, terminated, or modied by Buyer, in whole or in part, except upon Seller’s prior written approval.
INVOICING: Minimum invoice charge of $50.00 (does not apply to Plumbing Products).
NON-STOCK PRODUCTS: Non-stock products (i.e., customized or non-standard products) may require a minimum order and buyer should make prior inquiry to Seller. Once production has begun, orders for non-stock products cannot be cancelled without the prior written approval of Seller. Seller will not accept the return of non-stock products.
CONSTRUCTION: All sales, contracts, and offers to buy or sell, all rights, remedies and duties of all persons, and the construction and effect of all provisions hereof, shall be governed by and construed according to the laws of the State of Iowa.
2-17
WARNING:
WARNING:
WARNING:
WARNING:
WARNING: It is unlawful in CALIFORNIA & VERMONT (effective 1/1/2010); MARYLAND (effective 1/1/2012); LOUISIANA (effective 1/1/2013)
and the UNITED STATES OF AMERICA (effective 1/4/2014) to use any product in the installation or repair of any public water system or any plumbing
in a facility or system that provides water for human consumption if the wetted surface area of the product has a weighted average lead content greater than 0.25%. This prohibition does not extend to service saddles used in California, Louisiana or under USA Public Law 111-380.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
5
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
Freight Program
I. PRODUCT GROUP QUALIFICATION LEVELS
Freight will be prepaid and allowed by Seller on orders that meet or exceed the following net prices or unit qualiers (net prices reect list prices less applicable discounts):
1. High Pressure Gas (may be combined with plumbing Valves) .............................................................................. $2,500 Net
2. Water Service Products (may be combined with Curb Boxes, Pumps, Pump Accessories, Plumbing Valves,
Frames & Covers, HPG, and Yoke Boxes) ............................................................................................................. $6,000 Net
3. Pumps ..................................................................................................................................................................... 12+ units
4. Plumbing Products (may be combined with Pump Accessories) ........................................................................... $1,300 Net
5. Tanks.......................................................................24+ units (may be 24 units in combination with Jets and Submersibles)
6. Pit Setters . . . 15” diameter – 144 units
18” diameter – 96 units
21” diameter – 72 units
24” diameter – 48 units
30” and 36” diameter – 24 units
II. ADDITIONS
Once an order qualies for freight in any product group, other products on your order ride free (excluding Tanks and Pit Setters). However, additions to freight allowed orders will NOT be allowed once the original order is on board or a partial shipment has been made against the original order.
Freight qualiers are subject to change without notice.
6
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
Non-Potable Valves & Fittings
Non-Potable
Valves &
DOMESTIC
Fittings
Pages 8-12
Non-Potable Use Only
WARNING: It is unlawful in CALIFORNIA & VERMONT (effective 1/1/2010); MARYLAND (effective 1/1/2012); LOUISIANA (effective 1/1/2013) and the UNITED STATES OF AMERICA (effective
1/4/2014) to use THIS PRODUCT in the installation or repair of any public water system or any plumbing in
a facility or system that provides water for human consumption. The wetted surface area of THIS PRODUCT has a weighted average lead content greater than 0.25%.
2-17
7
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
Non-Potable Bronze Gas Plug Valves - Gas Only
10584 10552
Square Head Plug Valve w/Check (with double stake nut)
- FNPT x FNPT
- 2 PSI (5 PSI 1/2” & 3/4”)
- 1/2” - 2”
- Natural and LP Gas Only
- Threads conform to ANSI B1.20.1
- CSA certied 1/2” & 3/4”
DOMESTIC
10598 10554
Lever Handle Plug Valve w/Check
- FNPT x FNPT
- 2 PSI (5 PSI 1/2” & 3/4”)
- 1/4” - 2”
- Natural and LP Gas Only
- Threads conform to ANSI B1.20.1
Flat/Tee Head Plug Valve w/Top Check
- FNPT x FNPT
- 25 PSI
- 1/4” - 3” (2 1/2” - 3” less check)
- Natural and LP Gas Only
- Threads conform to ANSI B1.20.1
Square Head Plug Valve w/Top Check
- FNPT x FNPT
- 25 PSI
- 1/2” - 2”
- Natural and LP Gas Only
- Threads conform to ANSI B1.20.1
NON-POTABLE USE ONLY
10596 10558
Flat/Tee Head Plug Valve w/Check
- FNPT x FNPT
- 2 PSI (5 PSI 1/2” & 3/4”)
- 1/4” - 2”
- Natural and LP Gas Only
- Threads conform to ANSI B1.20.1
- CSA certied 1/2” & 3/4”
Lever Handle Plug Valve w/Top Check
- FNPT x FNPT
- 25 PSI
- 1/4” - 1”
- Natural and LP Gas Only
- Threads conform to ANSI B1.20.1
10604 10621
Square Head Plug Valve w/Check
- FNPT x FNPT
- 2 PSI (5 PSI 1/2” & 3/4”)
- 1/4” - 2”
- Natural and LP Gas Only
- Threads conform to ANSI B1.20.1
- CSA certied 1/2” & 3/4”
Flat/Tee Head Plug Valve w/Lockwing - Less Check
- FNPT x FNPT
- 25 PSI
- 1/2” - 2”
- Natural and LP Gas Only
- Threads conform to ANSI B1.20.1
NOTE: All A.Y. McDonald plug style gas valves are factory set. DO NOT TAMPER WITH BOTTOM NUT.
8
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
NON-POTABLE USE ONLY
Non-Potable Iron Gas Plug Valves - Gas Only
10685B / 10685G
Flat Head Plug Valve - Tamperproof
- FNPT x FNPT
- 175 PSI
- 1/2” - 2” (Black)
- 1/2” - 1” (Galvanized)
- Relubable Plug
- Iron body with bronze plug
- Natural and LP Gas Only
- Manufactured to ASME B16.33
- Threads conform to ANSI B1.20.1
10687B / 10687G
Flat Head Plug Valve - Lockwing - Tamperproof
- FNPT x FNPT
- 175 PSI
- 1/2” - 2” (Black)
- 1/2” - 1” (Galvanized)
- Relubable Plug
- Iron body with bronze plug
- Natural and LP Gas Only
- Manufactured to ASME B16.33
- Threads conform to ANSI B1.20.1
Square Head Wrenches
STOP SIZE
STOP
NUMBER
10554 2S 2S 3S 4S 5S 6S 7S 8S 10584 2S 3S 3S 5S 6S 7S 10604 2S 2S 2S 3S 3S 5S 6S 7S
1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
WRENCH NUMBER
DOMESTIC
2-17
9
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
Non-Potable Steam Stops - Steam Only
NON-POTABLE USE ONLY
9702
Square Head Plug Valve Less Check
- FNPT x FNPT
- 125 PSI Steam at 250º
- 3/8” - 2”
- Cast Bronze Construction
- Threads conform to ANSI B1.20.1
- Steam Only
DOMESTIC
9710
Square Head Plug Valve with Check - Two Port
- FNPT x FNPT x FNPT
- 3 Way - 2 Port
- 150 PSI Steam at 250º
- 3/4” - 1 1/4”
- Cast Bronze Construction
- Threads conform to ANSI B1.20.1
- Steam Only
9711
Square Head Plug Valve with Check - Three Port
- FNPT x FNPT x FNPT
- Three Way - Three Port
- 150 PSI Steam at 250º
- 1/2” - 2”
- Cast Bronze Construction
- Threads conform to ANSI B1.20.1
- Steam Only
10
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
NON-POTABLE USE ONLY
Non-Potable Specialty Valves
845
Quick Opening Throttle Gate Valves
- FNPT x FNPT
- 125 PSI
- 1” - 1 1/4”
- Cast Bronze Construction
- (1” Bushed down from 1 1/4”)
- Intended for liquid based petroleum applications
848
Self-Closing Throttle Gate Valves
- FNPT x FNPT
- 125 PSI
- 1”
- Cast Bronze Construction
- (1” Bushed down from 1 1/4”)
- Intended for liquid based petroleum applications
- Spring loaded self-closing handle
845 & 848 Repair Kit
Repair kit includes: gland, cam, stem, and o-rings
- 7213-139 845RK Repair Kit
- Sizes: 1”, 1 1/4”
Repair Handle
- 7213-208 848R Repair Handle and grip
- Size: 1 1/4”
- 7118-309 - Spring and Gland
- Includes Spring & Spacing Gland
- Size: 1 1/4”
DOMESTIC
848R
Self-Closing Throttle Gate Valves
- FNPT x FNPT
- 125 PSI
- 1 1/4”
- Cast Bronze Construction
- Intended for liquid based petroleum applications
- Spring loaded self-closing handle
2-17
11
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
Non-Potable Specialty Valves
NON-POTABLE USE ONLY
11001
Lock Lever Barrel Faucet
- MNPT x Plain End
- 25 PSI
- 3/4” - 1”
- Brass construction with hinged lever.
- Intended for gravity ow petroleum products.
DOMESTIC
11002
Lock Lever Barrel Faucet
- MNPT x NPSH
- 25 PSI
- 3/4” - 1”
- Brass construction with hinged lever.
- Intended for gravity ow petroleum products.
882M
Utility Fill Cap & Vent
- MNPT
- 2”
- For above ground ll pipes
- Cast iron
- Can be padlocked
- Intended for liquid based petroleum applications
882
Utility Fill Cap & Vent
- FNPT
- 2” - 4”
- For above ground ll pipes
- Cast iron
- Can be padlocked
- Intended for liquid based petroleum applications
11003
Lock Lever Barrel Faucet
- MNPT x FNPT
- 25 PSI
- 3/4” - 1”
- Brass construction with hinged lever.
- Intended for gravity ow petroleum products.
2915S
Square Head Plug Valve
- MNPT x FNPT
- 40 PSI
- 1/2”
- Cast Bronze Construction
- Threads conform to ANSI B1.20.1
- (1/2” has square head without handle)
- Brine Stop
908
Vent
- FNPT
- 3/4” - 2”
- Double outlet design
- Iron body, brass screens
- Screen = Brass 16 mesh
12
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Valves & Fittings
No-Lead
NO-LEAD
Valves &
Fittings
Pages 14-66
NO-LEAD: The weighted average of the wetted surface of this no lead product contacted
by consumable water contains less than one quarter of one percent (0.25%) lead.
2-17
13
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Domestic / Specialty Valves
72892
Tee Head Stop & Drain Plug Valve with Check - No-Lead
- FNPT x FNPT
- 40 PSI
- 1/2” - 2”
- Cast Bronze Construction
- Threads conform to ANSI B1.20.1
- Water Only
72832
Stop & Drain Plug Valve with Check, Less Handle ­No-Lead
- FNPT x FNPT
- 3/4” - 1 1/4”
- 3/4” - 1” rated 100 PSI
- 1 1/4” rated 80 PSI
- Cast Bronze Construction
- Threads conform to ANSI B1.20.1
NO-LEAD
- Water Only
711X3FE 33
In-Line Dual Check - No-Lead
- FNPT Union Inlet and FNPT Integral Outlet
- 3/4”
- Lay length - 3.55”
- Pressure rated at 175 PSI
- Temperature range 34ºF to 180ºF
- Designed to hold 1 PSI in the direction of ow
- Cast brass components meet AWWA C800
- Designed and tested ANSI/ASSE 1024 and CSA B64.6 requirements
711X3ME 33
In-Line Dual Check - No-Lead
- MNPT Union Inlet and FNPT Integral Outlet
- 3/4”
- Lay length - 4.61”
- Pressure rated at 175 PSI
- Temperature range 34ºF to 180ºF
- Designed to hold 1 PSI in the direction of ow
- Cast brass components meet AWWA C800
- Designed and tested ANSI/ASSE 1024 and CSA B64.6 requirements
72832T
Stop & Drain Plug Valve with Check, Tee Handle - No-Lead
- FNPT x FNPT
- 3/4” - 1 1/4”
- 3/4” - 1” rated 100 PSI
- 1 1/4” rated 80 PSI
- Cast Bronze Construction
- Threads conform to ANSI B1.20.1
- Water Only
ACCESSORIES
Accessories - THIS PRODUCT does not come in contact with consumable water.
618
Tee Handle for 72832
14
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Full Port / Specialty Ball Valves
72032T / 72032S
Full Port Ball Valve - No-Lead
- FNPT / SWT
- 600 WOG, 150 WSP
- 3/8” - 3” (SWT), 1/4” - 3” (FNPT)
- Manufactured to MSS-SP-110
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- NSF / ANSI 61-8 & NSF / ANSI 372
- 72032T 1/2”-2” certied to:
72117T / 72117S
Full Port Ball Valve - No-Lead
- FNPT / SWT
- 600 WOG
- 3/8” - 3” (SWT)
- 1/4” - 4” (FNPT)
- Manufactured to MSS-SP-110
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- Blowout proof stem
- NSF / ANSI 61-4
- 72117T 1/2” - 2” certied to:
72028PF
Forged Brass Body Full Port Ball Valve with Press Ends - No-Lead
- 1/2” - 4”
- 250 PSI CWP
- Conforms to NSF/ANSI 61-2012, NSF/ANSI 14-2010a, and NSF/ANSI 372-2010 (2 1/2” - 4” works with XLC Jaws)
72028PFGH
Forged Brass Body Full Port Ball Valve with Press End and Removable Cap No-Lead
- 3/4” Press x 3/4” MGHT
- 250 PSI CWP
- Conforms to NSF/ANSI 61-2012, NSF/ANSI 14-2010a, and NSF/ANSI 372-2010
NO-LEAD
72032TX / 72032SX
Full Port Ball Valve with T-Handle - No-Lead
- FNPT / SWT
- 600 WOG
- 1/2” - 1”
- Manufactured to MSS-SP-110
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- Blowout proof stem
72032TL
Full Port Ball Valve with Locking Handle No-Lead
- FNPT x FNPT
- 600 WOG
- 1/4” - 2”
- Manufactured to MSS-SP-110
- Threads conform to ANSI B1.20.1
- Blowout proof stem
72033T / 72033S
Full Port Ball Valve with Drain - No-Lead
- FNPT / SWT
- 600 WOG
- 1/2” - 1”
- Manufactured to MSS-SP-110
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- NSF / ANSI 61-8 & NSF / ANSI 372
- Blowout proof stem
72030C
Standard Port Ball Valve with Drain No-Lead
- COMP x COMP
- 400 WOG
- 1/2” - 1”
- NSF / ANSI 61-8 & NSF / ANSI 372
- Blowout proof stem
2-17
15
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Specialty Ball Valves
72031
Full Port Ball Valve - No-Lead
- SWT x MNPT
- 600 WOG
- 3/4”
- Manufactured to MSS-SP-110
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- Blowout proof stem
72030MP
Pex Ball Valve - No-Lead
- Pex x MNPT
- 400 WOG
- 1/2” - 3/4”
- Pex ends conform to ASTM F1807
- Blowout proof stem
NO-LEAD
72030FP
Pex Ball Valve - No-Lead
- Pex x FNPT
- 400 WOG
- 1/2” - 1”
- Pex ends conform to ASTM F1807
- Blowout proof stem
- 1” comes with lever handle
72030PC
Pex Ball Valve - No-Lead
- SWT x Pex
- 400 WOG - 150 WSP
- 1/2” - 3/4”
- Pex ends conform to ASTM F1807
- NSF / ANSI 61-8 & NSF / ANSI 372
- Blowout proof stem
72030DEP
Pex Ball Valve Drop Ear - No-Lead
- Pex x Pex
- 400 WOG
- 1/2” - 3/4”
- Pex ends conform to ASTM F1807
- NSF / ANSI 61-8 & NSF / ANSI 372
- Blowout proof stem
72033P
Pex Ball Valve with Drain - No-Lead
- Pex x Pex
- 400 WOG
- 1/2” - 3/4”
- Pex ends conform to ASTM F1807
- Blowout proof stem
72030P
Pex Ball Valve - Heavy Pattern No-Lead
- Pex x Pex
- 400 WOG
- 1/2” - 1”
- Pex ends conform to ASTM F1807
- NSF / ANSI 61-8 & NSF / ANSI 372
- Blowout proof stem
72030EP
Pex Ball Valve - No-Lead
- Pex x Pex
- 400 WOG
- 1/2” - 1 1/4”
- Pex ends conform to ASTM F1807
- NSF / ANSI 61-4
- Blowout proof stem
72030TCL
Test Cock with Lever Handle - No-Lead
- 1/4” MNPT x 1/4” FNPT
- NSF / ANSI 372
72030TC
Test Cock - No-Lead
- 1/4” MNPT x 1/4” FNPT, 1/8” MNPT x 1/4” FNPT
- NSF / ANSI 372
16
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
72030EXMP 72087BV
Expansion Pex Ball Valve - No-Lead
- Expansion Pex x MNPT
- 400 WOG
- 1/2” - 3/4”
- Pex ends conform to ASTM F1906
- NSF / ANSI 61-8 & NSF / ANSI 372
- Blowout proof stem
Full Port Ball Valve Insert - No-Lead
- Insert x Inser t
- 600 WOG
- 3/4”, 1”, 1 1/4”
- NSF 372
72030EXP
Full Port Expansion Pex Ball Valve - No-Lead
- Expansion Pex x Expansion Pex
- 400 WOG
- 1/2” - 1”
- Pex ends conform to ASTM F1960
- NSF / ANSI 61-8 & NSF / ANSI 372
- Blowout proof stem
No-Lead Specialty Ball Valves
NO-LEAD
ACCESSORIES
Accessories - THIS PRODUCT does not come in contact with consumable water.
72032EH
Extended Handles for Ball Valves - No-Lead
- 1/4” - 2”
- For models 72032 & 72033
- 2” will work for 2 1/2” & 3” valves
72032H
Repair Handles for Ball Valves - No-Lead
- 1/4” - 2”
- For models 72032 & 72033
- 2” will work for 2 1/2” & 3” valves
72032SSH
Stainless Steel Handles for Ball Valves No-Lead
- 1/4” - 2”
- For models 72032 & 72033
- 2” will work for 2 1/2” & 3” valves
72032TH
Tee Handle for Ball Valves - No-Lead
- 1/4” - 2”
- For models 72032 & 72033
- 2” will work for 2 1/2” & 3” valves
2033CAP
Replacement Drain Cap
2-17
17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Low Pressure Valves
72002
Hose Bibb - No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- 1/2” is MNPT or SWT Combination
- NSF / ANSI 372
72002HD
Hose Bibb - Heavy Duty - No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- 1/2” is MNPT or SWT Combination
- NSF / ANSI 372
NO-LEAD
72002NT
Hose Bibb - No Thread - No-Lead
- MNPT x Plain end
- 125 WOG
- 1/2” - 3/4”
- 1/2” is MNPT or SWT Combination
72005QT
Quarter Turn Hose Bibb - No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
72006
No-Kink Hose Bibb - No-Lead
- FNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
72006S
No-Kink Hose Bibb - No-Lead
- SWT x G.H.T.
- 125 WOG
- 1/2” SWT or 3/4” CLPG x G.H.T.
- NSF / ANSI 372
72003
Garden Hose Bibb - No-Lead
- FNPT x G.H.T.
- 125 WOG
- 1/2” - 1”
- NSF/ANSI 372
72005
Quarter Turn No-Kink Hose Bibb No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF/ANSI 372
72007
No-Kink Hose Bibb - No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- 1/2” is MNPT or SWT Combination
- NSF / ANSI 372
72007BV
Quarter Turn No-Kink Hose Bibb Ball Valve - No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
18
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Low Pressure Valves
72007BL
Quarter Turn No-Kink Hose Bibb No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI AB1953
72007CA
Angle Sillcock - No-Lead
- Comp x G.H.T.
- 125 WOG
- 5/8” Comp x 3/4” MGHT
- NSF / ANSI 372
72007QT
Quarter Turn No-Kink Hose Bibb No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
72014QT
Quarter Turn Angle Sillcock - No-Lead
- SWT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
72014PWF
Angle Sillcock w/ wide Flange - No-Lead
- Pex x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
NO-LEAD
72015
Angle Sillcock - No-Lead
- FNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
72014
Angle Sillcock - No-Lead
- SWT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
72014F
Angle Sillcock - Heavy Duty - No-Lead
- SWT x G.H.T.
- 1/2” - 3/4”
- 125 WOG
- 2” ange diameter
- Rubber coated oval handle
- NSF / ANSI 372
72015F
Angle Sillcock - Heavy Duty - No-Lead
- FNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- 2” ange diameter
- Rubber coated oval handle
- NSF / ANSI 372
72015VB
Angle Sillcock - w/Vacuum Breaker - No-Lead
- FNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- 2” ange diameter
- Rubber coated oval handle
- Vacuum Breaker is non-removable
- NSF / ANSI 372
2-17
19
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Low Pressure Valves
72015QT
Quarter Turn Angle Sillcock - Heavy Duty No-Lead
- FNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
72015WF
Angle Sillcock w/ Wide Flange - No-Lead
- FNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
NO-LEAD
72008
Boiler Drain - No-Lead
- MNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- 1/2” is MNPT or SWT Combination
- NSF / ANSI 372
72008P
Boiler Drain - No-Lead
- Pex or MNPT x G.H.T.
- 125 WOG
- 1/2”
- Pex ends conform to ASTM F1807
- NSF / ANSI 372
72004
Boiler Drain - No-Lead
- FNPT x G.H.T.
- 125 WOG
- 1/2” - 3/4”
- NSF / ANSI 372
72004QT
Quarter Turn Boiler Drain - No-Lead
- FNPT x G.H.T.
- 1/2” - 3/4”
- NSF / ANSI 372
72008QT
Quarter Turn Boiler Drain - No-Lead
- MNPT x G.H.T.
- 1/2”
- NSF / ANSI 372
72034SP
Standard Port Gate Valve - No-Lead
- Pex x Pex
- 200 WOG
- 1/2” - 3/4”
- Non-rising stem
- Pex ends conform to ASTM F1807
20
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Low Pressure Valves
72035T / 72035S
Full Port Gate Valve - No-Lead
- FNPT / SWT
- 300 WOG
- 1/2” - 2” (SWT)
- 1/4” - 4” (FNPT)
- Non-rising stem
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- NSF / ANSI 372
72038T
Bronze Full Port Gate Valve - No-Lead
- FNPT x FNPT
- 300 WOG - 125 WSP
- 1/2” - 2”
- Non-rising stem
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- NSF / ANSI 372
72019
Stop Valve with Drain - No-Lead
- COMP x COMP
- 125 WOG
- 1/2” - 3/4”
- Non-rising stem
- Soft seat design
- Directional
- NSF / ANSI 61-8 & NSF / ANSI 372
72022
Stop Valve with Drain - No-Lead
- SWT x SWT
- 125 WOG
- 1/2” - 3/4”
- Non-rising stem
- Soft seat design
- Directional
- NSF / ANSI 372
NO-LEAD
72017
Stop Valve with Drain - No-Lead
- FNPT x FNPT
- 125 WOG
- 1/2” - 3/4”
- Non-rising stem
- Soft seat design
- Directional
- NSF / ANSI 372
72018
Stop Valve - No-Lead
- FNPT x FNPT
- 125 WOG
- 1/2” - 3/4”
- Non-rising stem
- Soft seat design
- Directional
- NSF / ANSI 372
72022P
Stop Valve with Drain - No-Lead
- Pex x Pex
- 125 WOG
- 1/2” - 3/4”
- Pex ends conform to ASTM F1807
- Non-rising stem
- Soft seat design
- Directional
- NSF / ANSI 61-8 & NSF / ANSI 372
72023
Stop Valve - No-Lead
- SWT X SWT
- 125 WOG
- 1/2” - 3/4”
- Non-rising stem
- Soft seat design
- Directional
- NSF / ANSI 372
2-17
21
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Low Pressure Valves
72025
Angle Stop Valve with Drain - No-Lead
- Flare x FNPT
- 125 WOG
- 3/4” x 1/2”, 3/4” x 3/4”, 1” x 3/4”, 1” x 1”
- Soft seat design
- NSF / ANSI 372
72024
Angle Stop Valve - No-Lead
- Flare x FNPT
- 125 WOG
- 3/4” x 1/2”, 3/4” x 3/4”, 1” x 3/4”, 1” x 1”
- Soft seat design
- NSF / ANSI 372
NO-LEAD
72051T / 72051S
Y-Pattern Swing Check Valve - No-Lead
- FNPT / SWT
- 300 WOG - 150 WSP
- 1/2” - 2”
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- Directional
- NSF / ANSI 372
72050T / 72050S
Swing Check Valve - No-Lead
- FNPT / SWT
- 200 WOG
- 1/2” - 2” (SWT)
- 1/2” - 4” (FNPT)
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- Metal to metal seat
- Directional
- NSF / ANSI 372
2053T
Iron Y-Strainer - No-Lead
- FNPT x FNPT
- 500 WOG - 250 WSP
- 1/2” - 2”
- Threads conform to ANSI B1.20.1
- 20 Mesh SS screen
- Directional
72054T / 72054S
In-Line Check Valve - No-Lead
- FNPT / SWT
- 250 WOG, 125 WSP
- 1/2” - 2”
- Spring loaded check
- Rubber seats for silent operation
- Directional
72052T / 72052S
Bronze Y-Strainer - No-Lead
- FNPT / SWT
- 300 WOG - 150 WSP
- 1/2” - 2”
- Threads conform to ANSI B1.20.1
- Solder ends conform to ANSI B16.18
- 20 Mesh SS screen
- Closure plug included
- Directional
- NSF / ANSI 372
22
72057T
Bronze In-Line Check Valve - No-Lead
- FNPT x FNPT
- 200 WOG
- 1/2” - 4”
- Spring loaded check
- Directional
- NSF / ANSI 372
72115T
Anti-Sweat Valve - No-Lead
- MNPT
- 125 WOG
- 1/2”
- Used to mix hot and cold water supply to avoid condensation buildup on the water closet.
- NSF / ANSI 372
2-17
800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com
No-Lead Low Pressure Valves
72116T
Bronze Foot Valve - No-Lead
- FNPT
- 200 WOG
- 3/4” - 2”
- Stainless Steel screen
- End of line applications
- NSF / ANSI 372
72001
Vacuum Breaker - No-Lead
- FGHT x MGHT
- 3/4”
- ASSE 1011 * Flat washer seat
- NSF / ANSI 372
72041
Hose Swivel Adapter - No-Lead
- FNPT x F.G.H.T.
- 3/4”
- NSF / ANSI 372
72010P
Frostproof Sillcock - Multi-Turn Operation - No-Lead
- 1/2” Pex
- 125 PSI
- Chrome Plated Body
- Lengths: 4”, 6”, 8”, 10”, 12”, 14”
- NSF / ANSI 372
72011
Frostproof Sillcock with Vacuum Breaker - Antisiphon Multi-Turn Operation - No-Lead
- 1/2” MNPT or 1/2” SWT x G.H.T.
- 125 PSI
- Chrome Plated Body
- Lengths: 2”, 4”, 6”, 8”, 10”, 12”, 14”
- NSF / ANSI 372
72011P
Frostproof Sillcock with Vacuum Breaker - Antisiphon Multi-Turn Operation - No-Lead
- 1/2” Pex x G.H.T.
- 125 PSI
- Chrome Plated Body
- Lengths: 4”, 6”, 8”, 10”, 12”
- NSF / ANSI 372
NO-LEAD
2-17
72009
Hose Bibb Adapter - No-Lead
- MNPT x M.G.H.T.
- 1/2” x 3/4”, 3/4”
- NSF / ANSI 372
72010
Frostproof Sillcock - Multi-Turn Operation - No-Lead
- 1/2” MNPT or 1/2” SWT x G.H.T.
- 125 PSI
- Chrome Plated Body
- Lengths: 4”, 6”, 8”, 10”, 12”
- NSF / ANSI 372
72011QT
Frostproof Sillcock with Vacuum Breaker - Quarter Turn ­Thread End - No-Lead
- 1/2” MNPT or SWT x G.H.T.
- 125 PSI
- Chrome Plated Body
- Lengths: 4”, 6”, 8”, 10”, 12”, 14”
- NSF / ANSI 372
72011EXP
Frostproof Sillcock with Vacuum Breaker Antisiphon Mult-Turn Operation - No-Lead
- 1/2” Expansion Pex x G.H.T.
- 125 PSI
- Chrome Plated Body
- Lengths: 4”, 6”, 8”, 10”, 12”, 14”
- NSF / ANSI 372
- Pex ends conforms to ASTM F1960
23
Loading...
+ 53 hidden pages