A.Y. McDonald 74602BYG User Manual

SUBMITTAL DATA SHEET

NL Ball Style Meter Stop – 74602BYG

G CTS Compression x Yoke Star Nut

SUBMITTAL INFORMATION

 Manufactured in compliance with ANSI/AWWA C800 (latest revision)
 Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latest

revision) and identified with “NL”

 Certified to NSF/ANSI 61 and NSF/ANSI 372
 Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNS

C83600 -85-5-5-5 (latest revision)

 PTFE coated brass ball
 Valve rated for 300 PSIG water pressure, end connections not to exceed rated pipe pressure.
 Blow out proof EPDM port seals
 End piece joint sealed with an EPDM o-ring and thread locker
 Insert stiffeners required on all flexible plastic connections

A.Y. McDonald Mfg. Co.

P.O. Box 508
Dubuque, IA 52004-508

A.Y. McDonald considers the information on this assembly drawing correct when published. Item and option availability, including specifications, are subject to
change without notice.

Submitted by:

Toll Free: 1-800-292-2737
Fax: [phone]
Hours: 7:00 a.m. – 5:00 p.m., CST

[e-mail]

www.aymcdonald.com

04-20