Axxess AX-DSPX-NI1, AX-DSPX-HK3, AX-DSPX-GL44, AX-DSPX-GL1, AX-DSPX-FD2 Specification Sheet

AXDSP-X SPEC SHEET

INSTALLATION INSTRUCTIONS

Specifications

Input Impedance 1M Ohm
Input Channels 6 High/Low level Selectable
Input Options High Level or Low Level
Input Type Differential-Balanced
Input Voltage
High Level Range
Input Voltage

Low Level Range

0 - 28v Peak to Peak

0 - 4.9v Peak to Peak

General

Operating Voltage 10 - 16VDC
Standby Current Draw ~7mA
Operation Current Draw ~150mA
Adjustments/Controls Application via Bluetooth

Remote Output
or with lgnition

12VDC, Signal Sense

Having difficulties? We’re here to help.
Contact our Tech Support line at:

386-257-1187

Or via email at:
[e-mail]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM

Ouput Channels 10
Output Voltage Up to 5v RMS

Output Impedance 50 Ohms
Equalizer Type 31 Band Graphic EQ, +/- 10dB
THD <0.03%

Product Info

®

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.

Frequency Response 20Hz - 20kHz
Crossover 3-Way LPF, BPF, HPF THP per channel
Crossover Type Linkwitz-Riley 24DB Slope, Fixed
Sampling 48kHz

Metra recommends MECP
certified technicians

S/N Ratio 105dB @ 5V RMS

AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 9/1/20 INSTAXDSP-X