Page 1
AX-DSPX-HYKIA4
INSTALLATION INSTRUCTIONS
Hyundai/Kia Data Interface with Amplifier
Bypass Harness & DSP 2017-up
INTERFACE FEATURES
• Designed for SPDIF amplified sound systems
• Includes an amp bypass harness
• Retains BlueLink/UVO voice prompts
• All chimes/voice prompts go through the aftermarket amp
• Adjustable chime level
• Micro-B USB updatable
INTERFACE COMPONENTS
• AX-DSP-X
• AX-BASSKNOB
APPLICATIONS
Hyundai
Santa Fe 2017
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/20/19 INSTAX-DSPX-HYKIA4
•AX-DSPX-HYKIA4 harness
• AX-DSP-X harness
• Amplifier bypass harness
TABLE OF CONTENTS
Connections ............................................................2
Installation .........................................................3-4
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Tone generator
Product Info
Page 2
Factory Amp
(must be removed)
AX-D SP-X
Update Port
Factory Amp Harness
AX-BASSKNOB
Black/Yellow - Do Not Use
Red/White RCA Jacks - Do Not Use
Blue/White - Amp Turn-On Wire
Red/White - Do Not Use
CONNECTIONS
An SPDT relay, Metra part number
E-123, must be used if the amp turn-on
current of all amps exceed 1-amp.
CH 6
CH 7
AX-BASSKNOB
CH 8
CH 9
CH 10
SUB
RCA Jacks
(sold separately)
Additionable Outputs
For Optional Amps
White / Front Left +
White/Black / Front Left -
Gray / Front Right +
Gray/Black Front Right -
Yellow/Blue / Front Left Tweeter +
Yellow/Black / Front Left Tweeter -
Yellow/Red / Front Right Tweeter +
Yellow/Orange / Front Right Tweeter -
Dark Blue/Pink / Center -
Green / Rear Left +
Green/Black / Rear Left -
Purple / Rear Right +
Purple/Black / Rear Right -
Brown/White / Center +
Green/White / Sub 1 +
White/Red / Sub 1 -
Brown/Yellow / Sub 2 +
Brown/Blue / Sub 2 -
2
Page 3
I N STA L L AT I O N
1. Locate the factory amp, unplug all connectors, then remove the amp.
Note: Amp location is on the following page.
2. Install the AX-DSPX-HYKIA4 harness and make all necessary connections, but leave the
amp turn-on wire disconnected.
3. Plug the 16-pin and 20-pin connectors from the AX-DSPX-HYKIA4 harness into the
AX-DSPX-X .
4. Download and install the AX-DSP-X app from the Google Play Store or Apple App Store.
5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the
mobile device to the AX-DSPX-X. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button
to save the configuration. (Figure B)
7.
Connect the amp turn-on wire from the AX-DSPX-HYKIA4 harness. Click the Identify
button to confirm that the AX-DSPX-HYKIA4 is connected properly. If so, a chime will be
heard from the front left speaker. Test all functions of the installation for proper operation
Note: The outputs may need to be configured within the Outputs tab.
8.
Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup
Instructions tab, or online at Axxessinterfaces.com for an explanation of each tab in the app.
Continued on the next page
(Figure A)
.
(Figure B)
REV. 8/20/2019 INSTAX-DSPX-HYKIA4
3
Page 4
AX-DSPX-HYKIA4
INSTALLATION INSTRUCTIONS
I N STA L L AT I O N (CONT’D)
Having difficulties? We’re here to help.
Contact our Tech Support line at:
Amplifier Location
Hyundai
Santa Fe: Under passenger seat
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/20/19 INSTAX-DSPX-HYKIA4
386-257-1187
®
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Loading...