Page 1
AX-ALOC608
INSTALLATION INSTRUCTIONS
Wire Color & Function: The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front + Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE: Be sure that all audio input connections are polarized or
in phase with each other . That is, the positive output wires from
the audio source need to be connected to the corresponding
positive input wires of the AX-ALOC608. The same goes for the
negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
Adjusting the AX-ALOC608 for maximum performance:
After completing all of the necessary connections, turn the AXALOC608 adjustment pots all of the way down by rotating them
completely counter-clockwise. Now, turn the stereo system on
and adjust the main volume control on the stereo to approximately ¾ maximum volume. Select one of the adjustment pots
on the AX-ALOC608 and turn it slowly clockwise until you notice
audio distortion and then stop. T urn the remaining pot to the
same position as the previously adjusted pot. The audio set-up
of the AX-ALOC608 is now complete and ready to be enjoyed.
Page 2
AX-ALOC608
The AX-ALOC608 is designed to convert speaker
level audio to line level audio. This allows for the in-
stallation of line level products such as ampliers, EQs
and crossovers on systems that do not have RCA line
level outputs.
Features:
80 Watts Maximum Input, Input Circuit Corrects
Crossover Distortion Commonly Found On Other
Brands of LOCs, 6:1 Step Down with Variable Output,
Detachable Input Plug, Gold Flashed RCAs, Attractive
& Durable Enclosure
2 CHANNEL, ADJUSTABLE LINE OUTPUT CONVERTER
Loading...