Axxera AVM72NAVLH Owner's Manual

Download

Page 1

INSTALLATION/OWNER’S MANUAL

Multimedia Receiver with Bluetooth and Navigation

featuring a 6.2" Touch Screen Display

AVM72NAVLH

Page 2

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Operating system updates from Apple and Android may cause your receiver not to function properly. This can usually be fixed by doing a software/firmware update to the receiver itself. To see if your receiver has the latest firmware, contact customer service at 1-866-382-5476 to see if your radio needs an update.

Other trademarks and trade names are those of their respective owners.

Page 3

AVM72NAVLH PREPARATION

Safety Information

Please read all instructions carefully before attempting to install or operate.

Due to its technical nature, it is highly recommended that your Axxera AVM72NAVLH is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.

To prevent damage or injury:

• Make sure to ground the unit securely to the vehicle chassis ground.

• Do not remove the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.

• Do not subject the unit to excessive shock.

• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.

• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.

• Use only the provided hardware and wire harness.

• You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.

• If you experience problems during installation, consult your nearest Axxera dealer.

• If the unit malfunctions, reset the unit as described on page 10 first. If the problem still persists, consult your nearest Axxera dealer or call tech assistance @ 1-866-382-5476.

• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.

• When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while.

• When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops.

• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Page 4

Before You Start

• Disconnect negative battery terminal. Consult a qualified technician for instructions.

• Avoid installing the unit where it would be subject to high temperatures, such as from

direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

• Insert the supplied keys into the slots as shown.

• Connect wiring harness as shown on page 6. Consult a qualified technician if you are

unsure.

• Certain vehicles may require an installation kit and/or wiring harness adapter (sold

separately).

• Reconnect negative battery terminal, and test for correct operation.

• Snap trim ring into place (if required).

AVM72NAVLH

Preparation

TRIM PLATE

UNIT

KEY

SLEEVE

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

Page 5

Wiring Diagram - Inputs/Outputs

AVM72NAVLH INSTALLATION

Note:

When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 10 amp blade-type fuse located on the back of the unit.

Wiring Notes:

Rear camera input

A rear view camera (not included) can be used with the Camera input.

SWC-I R

USB

CH ARGE

GP S

CAMERAA

UDIOIN PUT

BT AN TENNA

Page 6

Control Locations

Power Mode Play / Pause Mute Talk End Call Setup Go To Home Volume Up Zoom Select Tune/Track Up Volume Down

1 2 3 4 5 6 7 8

9 10 11

12 13

15 16 17 18

19 20

21 22

24 25

Audio * Key Loudness Number Keys Root OSD (On Screen Display) Local / Random Tune/Track Down AS/PS / Repeat Stereo Stop Enter Band

Reset Map (Navigation) Tune / Track Up Power / Volume / Mute Tune / Track Down

1 2 3

USB Port Auxiliary Input MicroSD Slot (Navigation) Microphone IR Sensor

6 7 8 9

4 5 10

AVM72NAVLH OPERATION

Page 7

Notes:

• The remote control uses one 3 volt Lithium CR2025 battery. Remove the battery if the remote will not be used for a month or longer.

• Remove and dispose of battery properly.

• Do not store battery with metallic objects or materials.

Remove battery insulation tape .

To insert or replace the battery,

remove the battery holder.

Remove the battery from the

battery holder.

Install the new battery.

Make sure to keep the (+) side

up.

Insert the battery holder.

Remote Control Preparation

AVM72NAVLH OPERATION

Page 8

Power On/Off

Volume

Mute

Auxiliary Input

USB Port

Main Menu

Mode

Press

to turn the unit on. Press and hold to turn the unit off.

Rotate the volume knob to increase or decrease the volume level.

Momentarily press to silence the audio. Momentarily press again to return to the previously selected volume. Rotating the volume knob

while the muted will also cancel the mute function.

Connect external audio devices to the 3.5mm auxiliary input on the front panel.

Connect a USB device to the USB port on the front panel to play MP3 files or view AVI, MP4 video files or JPG photos.

From any operational mode, press the house icon in the top left corner to access the Main Menu screen.

1. Adjust screen brightness or put the monitor into standby mode.

2. Access audio setting such as EQ, Surround Sound Settings and Field Settings (Balance and Fader).

From the main menu screen, press the corresponding mode icon to access available input modes: Radio, Navigation, USB, Bluetooth Phone, Bluetooth Music, Rear Camera, Auxiliary Input and AV In. Modes of operation are indicated on the display and/or the monitor. USB flash drive must be connected to appear in the mode selection string.

General Operation

1 2

AVM72NAVLH OPERATION

Page 9

From the Main Menu screen, press Settings in the bottom right corner to access the Setup Menu and select from the following categories: General, Audio, Video and Bluetooth.

General:

• GPS Mix - Select to turn GPS Mix settings On or Off.

• GPS Map - Select MovileNavigator (or other options if added).

• Wallpaper - Select between three available wallpaper options.

• Panel Adust - Select to calibrate the touch screen.

• Radio Area - Select your current geographic area: Europe, USA, South America, Russia and Asia.

• Time Setting - Adjust the current time (hours and minutes) and choose

between a 12-hour and 24-hour clock.

• SWC - Select to program steering wheel controls.

• Beep - Select to turn the audible beep On or Off.

• Camera - Select to turn the rear camera On or Off.

• Version- Select to view information about the unit.

• Restore Default- Select to restore the unit to default settings.

Audio:

• Sound Effect - Select to access the three sound effect sub-menus.

- EQ - Select from any preset equalization curve (Classic, Rock, Pop, Jazz, Beat, Flat) or use custom settings (User).

- Surround Sound - Select one of the following surround sound configurations: Concert, Church, Passive, Wide, Live or None.

- Field - Select to adjust Balance and Fader settings.

Video:

• Aspect Ratio - Select the desired aspect ratio: 4:3PS, 4:3LB or 16:9.

• Adjust - Select to adjust levels of Brghtness, Contrast, Hue, Saturation

and Sharpness.

• Panel - Select to choose backlight settings: 10s, 20s, 30s or Off.

Bluetooth:

• Auto Connect - Turn auto connect feature On or Off.

• Auto Answer - Turn auto answer feature On or Off.

General Operation

Setup Menu

AVM72NAVLH OPERATION

Page 10

Select the Radio icon from the Main Menu screen.

Press to return to Main Menu screen.

Displays current mode of operation.

Press momentarily to tune the unit down one step at a time. Press and hold to tune down by seeking the next strong station.

To store a preset station, tune unit to desired station, then press and hold the desired preset button to store the current station in that preset spot. Up to 18 FM and 12 AM stations can be stored in memory. Momentarily press any preset station to play it instantly.

Press to adjust screen brightness or put the monitor into standby

mode.

Press to select between three FM and two AM bands.

Press to toggle between LOCAL and DX (distance) tuning.

Press to access audio setting such as EQ, Surround Sound Settings

and Field Settings (Balance and Fader).

Press to toggle between Stereo and Mono tuning.

Radio Operation

Main Menu

Current Mode Indicator

Tune Frequency Down

Preset Stations

Screen

Band

Local / Distance

Audio

Stereo / Mono

5 6

AM/FM/RDS Tuner Operation

AVM72NAVLH OPERATION

87 9

Page 11

AVM72NAVLH OPERATION

Press and hold to automatically store the six strongest stations in the current band as presets. Press briefly for a preset scan, which will scan all preset stations and play 10 seconds of each. Press again to cancel the scan and continue playing the current station.

Press to access the Setting Menu.

Press momentarily to tune the unit up one step at a time. Press and hold to tune up by seeking the next strong station.

AS/PS

Settings

Tune Frequency Up

AM/FM/RDS Tuner Operation

1110

Page 12

USB Operation

CD/MP3

or JPG Operation

Main Menu

Current Mode Indicator

File Information

Screen

Tune / Track Down

Play / Pause

Audio

Tune / Track Up

To play MP3 files from a USB device, insert device into the USB slot on the front of the unit and playback will begin automatically. To return to USB playback from another mode of operation, select the corresponding icon from the Main Menu.

Press to return to Main Menu screen.

Displays current mode of operation.

Displays information about the current file.

Press to adjust screen brightness or put the monitor into standby

mode.

Press momentarily to tune the unit down one step at a time. Press and hold to tune down by seeking the next strong station.

Press to play or pause playback.

Press to access audio setting such as EQ, Surround Sound Settings

and Field Settings (Balance and Fader).

Press momentarily to tune the unit up one step at a time. Press and hold to tune up by seeking the next strong station.

AVM72NAVLH OPERATION

4 7

Page 13

USB Operation

Folder Search

Settings

Repeat

Random

Press to access the directory of folders and files. Use the up/down arrows to scroll through the folder list, then press on the name of the desired folder to access it. Use the up/down arrows to scroll through the file list, then press on the name of the desired file to access it.

Press to access the Settings Menu.

Press to turn Repeat feature on.

Press to turn Random feature on.

AVM72NAVLH OPERATION

Page 14

AVM72NAVLH OPERATION

Media Compatibility - USB

File Type MP3

File System FAT

FAT 12 X

FAT 16/FAT 32



File

Extension

. mp 3/. M P 3/. M p 3/. mP 3



. r m p/. m4 a X

MPEG

Format

MPEG 1



MPEG 2



MPEG 2.5



Sampling

Frequency

MPEG 1 32/4 4.1/4 8 kH z MPEG 2 12/16/22.05/24kHz

MPEG 2.5 8/11.0 25/12k Hz

Bitrate

MPEG 1 32 ~ 320kbps MPEG 2 8 ~ 160kbps

MPEG 2.5 8 ~ 160kbps

Other

Information

Directory Depth Unlimited File Name Length 32 bytes Total File Number 2000 files

Total Folder Number 200 folders

File Number via Folder 2000 files

MP3 ID3 TAG

ver.1.x



ver.2.x



Title, Artist, Album



Notes:

• For USB mode, it is not possible to view JPG files on the in-dash monitor while the vehicle is moving. This is a safety feature to prevent driver distraction.

• The JPG image viewer function will only operate when vehicle is in park and the parking brake is engaged.

• Due to ongoing technological advancement, some USB flash drives may be incompatible with this unit.

Page 15

AVM72NAVLH OPERATION

Media Compatibility

The following types of discs/files are compatible:

• AVI - Max video resolution: 720x480, Max video bit rate: 5000 kbps

• Mpeg2: Max video resolution: 720x480, Max video bit rate: 5000 kbps

• Mpeg4: Max video resolution: 720x480, Max video bit rate: 5000 kbps

• DivX/Xvid: Max video resolution: 720x480, Max video bit rate: 5000 kbps

• USB format type: FAT32/FAT

The following types of discs/files are not compatible:

• MP3 PRO format, MP3 playlists

• RMP format

• WAV format

• WMV format

• WMA format

• AAC, protected AAC, M4A format

MP3 playback sequence begins in the root folder of the USB flash drive. Any empty folders or folders that do not include MP3/JPG files are skipped.

ISO9660 standards:

• Maximum nested folder depth is 8 (including the root folder).

• Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and “_” (underscore). Some characters may not be displayed correctly, depending on the character type.

• This device can play back files in Joliet and other standards that conform to ISO9660. MP3 written in the formats other than the above may not play and/or their file names or folder names may not be displayed properly.

Some files may not play or be displayed correctly, depending on sampling rates and bit rates.

For best results, use the following settings when ripping MP3 files: 128kbps or higher constant bit rate

44.1kHz or higher sampling frequency

Media Compatibility

Playback Order

Compatible Recording Formats

Notes

Page 16

Bluetooth Operation

Before you can use a Bluetooth device, it must be paired and connected. Make sure that Bluetooth is activated on your device before you begin the pairing process.

The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details. The device name is "Axxera

AVM72NAVLH". The Bluetooth passcode "0000". The unit

can be in any mode of operation when pairing is performed.

Note: On certain phones, pairing may need to be done more than once if there are connectivity issues.

Most Bluetooth devices support the auto-connect feature and will connect automatically if the device is in range when the unit is powered-on. If your device was previously paired but does not connect, enter the Bluetooth setup menu and ensure that Auto Connect is On.

To access the phone, select Bluetooth Phone from the Main Menu.

Press to return to the Main Menu screen. Displays current mode of operation.

Use the phone keypad to dial the desired phone number. Alternately, numbers can be dialed directly from the phone.

Press to display keypad and dial a number. Press to play music using the Bluetooth connection.

Preparation

Pairing a New Device

Connecting a

Paired Device

Bluetooth Phone

Main Menu

Current Mode Indicator

Phone Keypad

Phone

Music

AVM72NAVLH OPERATION

Page 17

Bluetooth Operation

Screen

Audio

Settings

End Call

Make a Call

Bluetooth Music

Previous File/Track

Play / Pause

Next File/Track

Press to adjust screen brightness or put the monitor into standby

mode.

Press to access audio setting such as EQ, Surround Sound Settings

and Field Settings (Balance and Fader).

Press to access the Settings Menu.

Press the end the current call.

Press to connect or answer a call.

To use your Bluetooth connection to play music from your device, press #5 or select Bluetooth Music from the Main Menu.

Press to go back to the previous file or track.

Press to pause or resume playback.

Press to advance to the next file or track.

1312 14

AVM72NAVLH OPERATION

Page 18

Front 3.5mm Aux Input & Rear RCA A/V Input

Rear Camera Operation - (Optional)

Connect an optional audio source into the 3.5mm (front panel) input.

Select auxiliary input from the Main Menu to listen to audio.

Adjust volume on the external audio source as needed (if connected to the headphone output of the device).

Connect an optional audio/video source to the rear auxiliary input (Red/White/ Yellow RCA connectors). Refer to page 6 for details.

Select AV Input from the Main Menu to listen to audio.

Engage parking brake to watch video.

Connect an optional rear camera to the Camera Input (Black RCA connector).

Refer to the wiring diagram for details.

Manual selection - Touch CAMERA icon from the Main Menu or from any operational mode (when enabled) to select camera mode. Touch the top left area

on the screen to exit camera mode.

Note: The manual mode is for dedicated cameras that are ALWAYS on while driving, it is not meant for cameras that are connected to the vehicle's reverse light.

The unit will automatically select camera mode when connected to the reverse lamp circuitry.

Note: The external video output is not active when using the rear camera input.

Auxiliary Input

Using AV Input

Using Rear Camera

Auto Selection

AVM72NAVLH OPERATION

Navigation Operation

To access navigation functions, select Navigation from the Mein Menu.

For questions regarding navigation operation, refer to the Navigation manual available online at www.axxeraaudio.com/support/manuals.php.

Navigation Operation

Page 19

Limited One Year Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.

Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.

Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized Dual dealer and used in the U.S.A.

What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/ removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.

2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.

3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.

4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:

• Call us toll-free at 1-866-382-5476

• E-mail us at cs@dualav.com

Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.

AVM72NAVLH OPERATION

Page 20

Specifications

FM Tuner

AM Tuner

Front USB

Monitor

General

Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 10dBf 50dB quieting sensitivity: 20dBf Stereo separation @ 1kHz: 38dB Frequency response: 30Hz-13kHz

Tuning range: 530kHz-1710kHz Usable sensitivity: 24uV Frequency response: 30Hz-2.3kHz

Compatibility: High Speed USB 2.0 USB Class: Mass storage class

Panel size: 6.2” diagonal measurement View angle (up/down/left/right): 50/70/70/70 Resolution: 800 (H) x 480 (V) Brightness (cd/m2): 250 Contrast ratio: 500:1 Pixels: 1,152,000

Speaker output impedance: 4 ohms Line output voltage: 4 volt RMS Line output impedance: 200 ohms Chassis dimensions: 7" x 7" x 2" (W x D x H)

Design and specifications subject to change without notice.

AVM72NAVLH OPERATION

Part Name Part Number Pieces

Trim Ring

40-042502-0002 1

GPS antenna

33-013001-0023 1

Remote control

74-010101-1001 1

SWI Guide

60-C16169-01-01 1

Parts List

CEA-2006 Power Standard Specifications

(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)

Power Output: 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)

Page 21

Troubleshooting

General

Problem Cause Action

Unit will not turn on

(no power)

Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage

Check connections for proper voltage (11~16VDC)

Black wire not connected Check connection to ground Fuse blown Replace fuse(s)

Unit has power

(but no sound)

Speaker wires not connected Check connections at speakers One or more speaker wires touching each

other or touching chassis ground

Insulate all bare speaker wires from each other and chassis ground

Unit blows fuse(s)

Yellow or red wire touching chassis ground Check for pinched wire Speaker wires touching chassis ground Check for pinched wire Incorrect fuse rating Use fuses with correct rating

Unit has audio

(but no video)

Parking brake safety circuit not connected Parking brake not applied

Check connections at parking brake Apply parking brake as described on page 26

No video display

(when in reverse)

Reverse circuit not connected Vehicle is not in reverse

Check connections at reverse lamp Select reverse gear

IR remote does not work Dead battery Replace battery

Please keep your original sales receipt and be prepared to provide this receipt in the event you require service, as your original receipt is considered the best proof of purchase and indicates the date you purchased your Axxera product.

Dealer Name

Dealer Phone

Purchase Date

For Your Records

AVM72NAVLH OPERATION

Page 22

Dual Electronics Corp.

Toll Free: 1-866-382-5476

Monday-Friday, 9AM-5PM EST

www.axxeraaudio.com

NSA0317-V01

Printed in China