AXTON AT-6E-S Specsheet
MegaPixel AT-6E-S
PoE Ready IR
ILLUMINATE THE NIGHT
SIMPLE INSTALLATION
Just connect CAT5e cable into appropriate midspan.
QUICK and EASY INTEGRATION
Retrofit into existing installation via a single cable using
AXTON’s PoE Pass-Thru kit. Synchronize with camera or
any other system device with input or output capability,
link multiple units together.
MADE IN THE USA
All products are designed and manufactured in the USA.
LIFETIME WARRANTY
All products are covered by a lifetime warranty with
advanced replacement.
ILLUMINATION DISTANCE
Distance In Feet
TIPS:
HFOV - Horizontal Field Of View - Coverage area in feet/meters or an angle for optimal
system performance HFOV should be matched to cameras eld of view. The greater the
coverage angle the less illumination distance.
Retrot the IR illuminator into existing installation without running additional cable.
REQUIRES AXTON’s Pass-Through KIt. Simply install mid-span from kit at head-end and use
supplied T connector at camera location, that’s it, done. Contact us for additional information
Consider using I/O ports to synch IR & Camera - Input/Output ports allow to hard-wire IR
& the camera for seamless switching from day to night modes. You may also daisy chain
multiple IRs to switch ON/OFF synchronously.
Angle: 130˚
Range: 50’/16m
HFOV: 91’/28m
Angle: 60˚
Range: 82’/25m
HFOV: 82’/25m
Angle: 30˚
Range: 130’/40m
HFOV: 68’/21m
Angle: 10˚
Range: 200’/61m
HFOV: 35’/11m
SPECIFICATIONS
Wavelength 850nm (semi-covert)
Input Voltage PoE (IEEE 802.3af )
Power Consumption 6 Watts
Operating Temperature -58°F...+140°F / -50°C...+60°C
Dimensions 3.75” x 2.75” x 2” /95 x 70 x 51mm
Weight 10oz./0.3 kg
Environmental IP 67
Mounting Tilting U-bracket
TILTING
U-BRACKET
included*
*Free to swap with
Mobotix or L bracket
ILLUMINATE THE NIGHT
801 West Robinson Drive, Suite 500, North Salt Lake, UT 84054
q801/519-0500 < 801/519-0501 %sales@axtontech.com w www.axtontech.com
Made in the USA Lifetime Warranty
Loading...