Axor 39850XX1 User Manual

Installation Instructions / Warranty

Citterio

39850XX1

Axor Citterio Kitchen Faucet

39850XX1

Do not allow the supply hoses to twist, or
the flow of water will be reduced.

Technical Data

Operating pressure: max. 145 psi
Recommended operating pressure: 14.5 - 72 psi
Test pressure: 232 psi
Hot water temp.: max. 176° F*
Recommended hot water temp.: 120° - 140° F*
Rate of flow

*Know and follow all applicable local plumbing codes when setting
the temperature on the water heater.

For proper operation of the faucet, the hot supply should be on
the left and the cold supply should be on the right.

2

max. 2.2 gpm

Installation

Place the faucet on the mounting surface.
If the mounting surface thi

ckness is 1 7/8” or less,
install the plastic washer, friction washer, metal washer
and mounting nut. Tighten the mounting nut. Tighten
the tensioning screws.

If the mounting surface is 1 7/8” - 2 3/4”, omit the
plastic washer.

plastic washer

friction washer

metal washer

mounting nut

tensioning screws

friction washer

metal washer

mounting nut

tensioning screws

Remove the spout set screw.

3