Axor 38040XX1 User Manual

Installation Instructions / Warranty

2

Uno

38040XX1
38222XX1

03/2005 9.05405.01

Uno2 Lavatory Faucet
38040XX1
Uno2 Bidet Faucet
38222XX1

Technical Specification

Maximum water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Maximum hot water temp. 176o*
Recommended hot water temp 120o - 140o*
Max. flow rate @ 45 psi 2.2 gpm
Max. deck thickness 1 5/8”
Hole size in deck 1 3/8”

*Many municipalities require that the water heater be set no
higher than 120o. Please know and follow all applicable
plumbing codes when setting the temperature on the water
heater.

Installation considerations:

• Hansgrohe recommends that this faucet be installed by a licensed professional
plumber.

• The supply hoses installed on this unit connect to the supply stops with standard 3/
8" compression fittings. Supply stops and 3/8" compression fittings are not
included.

• The 38222XX1 bidet faucet is not for use on a vertical spray bidet.

2

Installation Instructions

• Sit the faucet with black sealing ring in the faucet hole on top of the
mounting surface.

• From beneath, install the friction washer, metal washer, and mounting nut.
Tighten the mounting nut, taking care not to overtighten.

• Check the position of the faucet. When satisfied, use a slot-headed
screwdriver to tighten the tensioning screws.

• Feed the pull rod through the hole in the back of the faucet body.

• Attach the supply lines to the supply stops with standard 3/8" compression

fittings (not included)

sealing ring

friction washer

metal
washer

mounting nut

tensioning screws

3