Axor 18113181 User Manual
Installation Instructions / Warranty
Massaud
18113181
2
Axor Massaud 3-Hole Basin Mixer Rough Valve
18113181
18113181 (shown with 18112001 trim)
18113181 (shown with 18115001 trim)
Product Specification
Max. Flow Rate 2.2 gpm
Max. incoming water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Max. hot water temperature 176o F*
Recommended hot water temp 120oF - 140oF*
Hot and cold inlets 1/2” female IPS
Requires trim kit 18112001 or 18115001 (not included)
This unit can be used with continuous flow water heaters if the flow pressure is at least 20 psi.
*Know and follow all applicable local plumbing codes when setting the temperature on the water heater. In Massachusetts,
the water heater may be set no higher than 112oF.
Installation Suggestions
18112001 shown with Axor Massaud
lavatory
18115001 shown with Axor Massaud
lavatory.
Please know and follow all applicable local plumbing codes regarding the required air gap between the end of the spout and the top of the lavatory.
3
Loading...