Axor 14856001, 14870001, 14850001, 14876001 User Manual
Installation Instructions / Warranty
Uno
14850001
Uno
14856001
Puro
14870001
Puro
14876001
2
Axor Uno Kitchen Mixer 14850001
Axor Uno Kitchen Mixer with Sidespray 14856001
Axor Puro Kitchen Mixer 14870001
Axor Puro Kitchen Mixer with Sidespray 14876001
14850001
14870001
14856001
14876001
Product Specification
Recommended water pressure 45 - 80 psi
Recommended hot water temp 120oF - 140oF*
Flow rate 2.2 gpm
Hole sizes
Faucet 1 1/2”
Sidespray 1”
Max. mounting surface thickness
Faucet 2 3/8”
Sidespray 1 1/8”
3/8” supply hoses -- requires 3/8” compression fittings (not included)
Sidespray faucets include double check valve
*Please know and follow all applicable plumbing codes when setting the temperature on the water heater.
Installation Considerations
For best results, Hansgrohe recommends installation by a licensed, professional plumber.
Large differences in pressure between the hot and cold supplies should be balanced.
The supply lines should be flushed thoroughly of building debris before installing this faucet.
The supply hoses on this faucet require stops with 3/8” compression fittings (not included).
3
4
Install the faucet
Remove the plastic washer, fiber washer, friction washer,
and mounting nut from the faucet.
If the mounting surface is thicker than 1 3/8”, or if there
is insufficient space, discard the plastic washer.
From below the mounting surface, install the plastic washer (if using), fiber washer, and friction washer. Install the
mounting nut, but do not tighten it completely.
Inspect the placement of the faucet. Reposition if necessary.
When satisifed, finish tightening the mounting nut.
Tighten the tensioning screws.
plastic washer
fiber washer
friction washer
mounting nut
tensioning
screws
fiber washer
friction washer
mounting nut
tensioning
screws
Connect the hoses to the stops using 3/8” compression
fittings (not included). Use two wrenches, as shown in
the diagram, to prevent the hoses from twisting or from
becoming loosened from the faucet.
For proper operation of the faucet, the hot supply should
be on the left, and the cold supply should be on the right.
Loading...