AXOR 10754181 Installation Manual
Installation Instructions / Warranty
Starck
10754181
Technical Information
Recommended water pressure 15 - 75 psi
Max. water pressure 145 psi
Recommended hot water temp. 120°-140° F*
Max. hot water temp 176° F*
Flow rate 14.5 gpm
*Please know and follow all applicable local plumbing codes when
setting the temperature on the water heater.
Installation Considerations
For best results, Hansgrohe recommends that
•
this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly
•
before beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
This rough is for use with Axor Starck thermostatic
•
mixer trim 10755XX1.
The thermostatic cartridge is included with the
•
trim kit.
The thermostatic cartridge incorporates a high
•
temperature limit stop that can be reset to comply
with local plumbing codes.
To prevent scalding, the maximum output tempera-
•
ture of the shower valve must be no higher than
120°. In Massachusetts, the maximum output
temperature of the shower valve can be no higher
than 112°F.
The valve includes check valves that should be
•
inspected at least once per year.
Keep this booklet and the receipt (or other proof
•
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Installation Suggestions
27413XX1
28494XX1
½"
10971181
10754181
10972XX1
10755XX1
¾"¾"
½"
27413XX1
28494XX1
10754181
10650181
¾"
10971181
10972XX1
10755XX1
10651XX1
¾"
¾"
28491XX1 (4x)
28486181
10971181
10971181
10754181
28486181
10650181
¾"
28491XX1
10972XX1
10972XX1
10755XX1
28491XX1
10651XX1
¾"
3
2
1
10971181
Showerheaven 720 x 720
10625XX1
¾"
¾"
¾"
10971181
10971181
10974181
¾"
¾"
10972XX1
10972XX1
10972XX1
10755XX1
Loading...