Axor 10135XX1 User Manual

Installation Instructions / Warranty

Axor Starck

10135XX1

2

Axor Starck Widespread Lavatory Faucet
10135XX1

Technical Information

Recommended water pressure 14.7 - 72.5 psi
Max. water pressure 145 psi
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 165°F*
Hole size in mounting surface 1 1/4" valves
1 3/8" spout
Max. mounting surface depth 1 3/8"
Flow rate 1.5 gpm
Requires ½" supply lines (not included)

*Please know and follow all applicable local plumbing codes when setting
the temperature on the water heater.

Installation Considerations

For best results, Hansgrohe

•
recommends that this unit be
installed by a licensed, profes­sional plumber.

Please read over these instruc-

•
tions thoroughly before begin­ning installation. Make sure that
you have all tools and supplies
needed to complete the instal­lation.

Installation Instructions

Push the valve up through the hole in the mounting
surface. Thread the mounting ring with o-ring on as far
as it will go.

Rest the valve on the countertop. Tighten the tensioning
screws.

Install the escutcheons with o-rings.

Install the red and blue color rings.

Install the white plastic handle snap connectors with the
screws.

Press the handle firmly over the snap connector and
push firmly downwards.

3