Axis Communications 206 User Manual
AXIS 206 Family
Network Camera
User’s Manual
About this Document
This manual is intended for administrators and users of the
AXIS 206\206M\206W Network Camera, and is applicable
for software release 4.20. It includes instructions for using
and managing the product on your network. Previous
experience of networking will be of use when using this
product. Some knowledge of UNIX or Linux-based systems
may also be beneficial, for developing shell scripts and
applications. Later versions of this document will be posted
to the Axis Website, as required. See also the product’s
online help, available via the Web-based interface.
Safety Notices Used In This Manual
Caution! - Indicates a potential hazard that can damage the
product.
Important! - Indicates a hazard that can seriously impair
operation.
Do not proceed beyond any of the above notices until you
have fully understood the implications.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of the
patents listed at http://www.axis.com/patent.htm and one
or more additional patents or pending patent applications
in the US and other countries.
This product contains licensed third-party software. See the
menu item “About” in the product’s user interface for more
information.
Legal Considerations
Camera surveillance can be prohibited by laws that vary
from country to country. Check the laws in your local
region before using this product for surveillance purposes.
Electromagnetic Compatibility (EMC)
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures: Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver. Connect the equipment to an outlet on a different
circuit to the receiver. Consult your dealer or an
experienced radio/TV technician for help. Shielded (STP)
network cables must be used with this unit to ensure
compliance with EMC standards.
USA - This equipment has been tested and found to
comply with the limits for a Class B computing device
pursuant to Subpart B of Part 15 of FCC rules, which are
designed to provide reasonable protection against such
interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to
cause interference, in which case the user at his/her own
expense will be required to take whatever measures may be
required to correct the interference.
Europe - This digital equipment fulfills the
requirements for radiated emission according to limit B of
EN55022/1998, and the requirements for immunity
according to EN55024/1998 residential, commercial, and
light industry.
AXIS COMMUNICATIONS
<Product Name> Quick User’s Guide
Japan - This is a class B product based on the standard of the
Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or
television receiver in a domestic environment, it may cause
radio interference. Install and use the equipment according to
the instruction manual.
Australia - This electronic device meets the requirements of
the Radio communications (Electromagnetic Compatibility)
Standard 1998 AS/NZS 3548.
Equipment Modifications
This equipment must be installed and used in strict accordance
with the instructions given in the user documentation. This
equipment contains no user-serviceable components.
Unauthorized equipment changes or modifications will
invalidate all applicable regulatory certifications and approvals.
Radio Transmission Regulatory Information
(AXIS 206W)
This equipment generates and radiates radio frequency energy,
and must be installed and operated while maintaining a
minimum body-to-camera distance of 3 feet (1 meter).
Tested to comply with FCC Standards FOR HOME OR OFFICE
USE. This product must be installed and used in strict
accordance with the instructions given in the user
documentation. This Axis product complies with the following
radio frequency and safety standards:
Europe - EU Declaration of Conformity. This device complies
with the requirements of the R&TTE Directive 1999/5/EC with
essential test suites as per standards
EN 60950 Safety of Information Technology equipment:
ETS 300 328 Technical requirements for radio equipment
ETS 300 826 General EMC requirements for radio equipment
USA - Federal Communications Commission FCC
This device complies with Part 15 of FCC Rules. Operation of
the device is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference that may cause
undesired operation.
Canada - This device complies with RSS-210 of Industry
Canada. Operation is subject to the following conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device
Liability
Every care has been taken in the preparation of this manual.
Please inform your local Axis office of any inaccuracies or
omissions. Axis Communications AB cannot be held responsible
for any technical or typographical errors and reserves the right
to make changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty of any
kind with regard to the material contained within this
document, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
Trademark Acknowledgments
Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN
Manager, Linux, Macintosh, Microsoft, Mozilla, Netscape
Navigator, OS/2, UNIX, Windows, WWW, Wi-Fi are
registered trademarks of the respective holders. Java and all
Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the
United States and other countries. Axis Communications AB
is independent of Sun Microsystems Inc. UPnP™ is a
certification mark of the UPnP™ Implementers Corporation.
WPA is a trademark of the Wi-Fi Alliance.
Support
Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response. If you
are connected to the Internet, you can:
• download user documentation and firmware updates
• find answers to resolved problems in the FAQ database.
Search by product, category, or phrases
• report problems to Axis support by logging in to your
private support area
• visit Axis Support at www.axis.com/techsup/
AXIS 206 Network Camera Family - User’s Manual
Revision 2.0
Part No: 23617
March 2005
Copyright© Axis Communications AB, 2004-2005
AXIS 206
4
Contents
About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product Family Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
AXIS 206M - Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
AXIS 206W - Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Overview AXIS 206/206M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Overview AXIS 206W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Install the AXIS 206/206M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Set the IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
One-click Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
UPnP™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
AXIS IP Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Manual Installation with ARP/Ping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Install the AXIS 206W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Set up the wireless connection - Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Discover the IP address for the AXIS 206W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Set up the AXIS 206W on other operating systems. . . . . . . . . . . . . . . . . . . . . . . . . 16
Access the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Access From a Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Select the language and password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Access from the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Focusing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
The Live View Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Image and Layout Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Overview of the Setup tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Image Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Live View Config - Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Live View Config - HTML Examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Network - Basic TCP/IP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Network - Advanced TCP/IP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
AXIS 206
Wireless Settings (AXIS 206W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SMTP (email). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
UPnP™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
LED Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5
AXIS 206 - About this manual
6
About this manual
This user’s manual is valid for all camera models included in the AXIS 206 family of
network cameras. All text in the manual applies to all models, except where otherwise
indicated. Apart from their names, the AXIS 206 and the AXIS 206M are identical in
appearance.
Product Family Features
The network cameras included in the AXIS 206 product family are:
• The AXIS 206 Network Camera
• The AXIS 206M Megapixel Network Camera
• The AXIS 206W Wireless Network Camera
All models share the following features:
• Live high-quality video over the network, with images provided as a real-time
Motion JPEG stream. Multiple resolutions are available.
• Built-in Web server, providing full access to all features and setup tools, via a
standard web browser. For advanced functionality, the camera can be accessed
via the AXIS HTTP API (more info at www.axis.com/developer).
• Support for multiple viewers.
• NAT-Traversal, which allows a camera located on an intranet (LAN) to be made
available from the other (WAN) side of a NAT router.
• Support for other languages. Simply select a language from the available options.
The camera’s entire web interface is then displayed in the selected language.
• Upgradeable firmware.
• Support for UPnP™
UPnP™ is a certification mark of the UPnP™ Implementers Corporation.
AXIS 206M - Additional Features
The AXIS 206M Megapixel Network Camera has the
following additional features:
• 6 different video resolutions available.
• Maximum resolution 1280 x 1024 pixels.
• HDTV (High Definition TV) format available
(16:9 format, 1280x720 pixels).
AXIS 206W - Additional Features
The AXIS 206W Wireless Network Camera has the
following additional features:
AXIS 206 - Product Family Features
AXIS 206/206M
7
• Built-in wireless module supporting the IEEE
802.11b standard, for access to wireless networks
• WPA-PSK and WEP (64 or 128-bit) encryption for
secure communication between camera and
network
• Multiple resolutions, up to 640x480 pixels (VGA
format), with a frame rate of up to 30 frames per
second in all resolutions.
AXIS 206W
AXIS 206 - Overview AXIS 206/206M
8
Overview AXIS 206/206M
Front
Focus
ring
Status
indicator
(outer ring)
Lock
ring
Network
connector
Rear panel
Power
connector
Serial number label
Power Cable
clip
Network
indicator
Control
button
Power
indicator
Power Connector - For connection of the PS-H or PS-L power adapter (included).
Network Connector - The AXIS 206/206M connects to the network via a standard RJ45
connector and automatically detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet).
Serial Number - This may be required during installation.
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service
page 11) or to restore the factory default settings, as described on page 36.
(see
Overview AXIS 206W
AXIS 206 - Overview AXIS 206W
9
Network traffic
indicator
Wireless module
power indicator
Focus
ring
Status
indicator
(outer ring)
Front
Wireless module
Serial number
label
Mounting
lock ring
Control button
USB connector
Rear panel
Wireless
module
Power cable
clip
Power
indicator
Power connector
Power Connector - For connection of the PS-H or PS-L power adapter (included).
USB Connector - For connection of the supplied USB cable, used for the initial
configuration of the wireless network connection.
Serial Number - This may be required during installation.
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service
(see
page 11) or to restore to the factory default settings, as described on page 36.
AXIS 206 - LED Indicators
10
LED Indicators
After completion of the startup and self test routines, the multi-colored Network, Status,
and Power LED indicators flash as follows:
AXIS 206 & AXIS 206M
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Network
Status
Power
Green Steady for connection to 100 Mbit/s network. Flashes for network activity.
Red Flashes rapid red, together with the Status indicator, for hardware error.
Unlit No connection.
Green Shows steady green for normal operation. Can be configured to flash green at intervals
whenever the camera is accessed. See the online help for more information.
Unlit When configured for “no flash” on camera access.
Amber Shows steady amber during reset to factory default or when restoring settings.
Red Slow flash for failed upgrade (see Emergency Recovery Procedure, on page 40.)
Rapid flash, together with the Network indicator, for hardware error.
Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
AXIS 206W
Network
(power)
Network
(traffic)
Status
Power
Note that the Network indicators LEDs (power and traffic) for the AXIS 206W are located
on the front of the wireless module. Note also that these LEDs cannot be switched off.
Blue Steady blue when wireless module has power.
Amber Flashes for traffic on wireless network.
Unlit No network traffic.
Green Shows steady green for normal operation. Can be configured to flash green at intervals
whenever the camera is accessed. See the online help for more information.
Unlit When configured for “no flash” on camera access.
Amber Shows steady amber during reset to factory default or when restoring settings.
Red Please contact Axis support at www.axis.com/techsup
Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
Mounting
AXIS 206 - Mounting
10
1. If required, use the 3 supplied screws to fix the base plate to
a flat surface.
2. To use the shorter stand, e.g. for wall mounting, unscrew
the lock ring to release the camera, and remove the
extension section.
3. Re-attach the camera, adjust the angle and gently tighten
the lock ring.
Important!
The AXIS 206 (all models) is designed for indoor use only, and must always be positioned where it is
not exposed to direct sunlight or strong halogen light, which can cause permanent damage to the
camera’s image sensor. Damage as a result of exposure to strong light is not covered by the Axis
warranty.
Wall mounting
Lock ring
Install the AXIS 206/206M
Follow the steps below to install the AXIS 206/206M on your local network (LAN). To
install the AXIS 206W, please see
page 15.
1. Using the self-adhesive strip, attach the supplied cable clip to the rear panel.
2. Position and mount the camera as required - see above.
3. Connect the power adapter to the camera.
4. Fasten the power cable in the cable clip. This helps prevent accidental cable
disconnection.
5. Connect the AXIS 206/206M to the network using a standard RJ-45 network cable.
6. Select a method for setting the IP address - see the following page.
AXIS 206 - Install the AXIS 206/206M
11
Set the IP address
The AXIS 206/206M is designed for installation on an Ethernet network. This involves
assigning it an IP address, automatically (via e.g. DHCP) or manually. Several methods are
available. The one to use depends on how your network is configured. If unsure of the
method to use, please consult your network administrator, or see the network’s
documentation.
• If you are using e.g. a home broadband router, you may find it convenient to view the
router’s administration pages to discover which IP address has been assigned to your AXIS
206/206M. Please consult the router’s documentation for further information.
• If your network has an Internet connection (with no HTTP proxy) and uses a DHCP server
to assign IP addresses, use the One-Click installation procedure. See
• If your network uses automatic IP addressing (DHCP) and your computer uses the UPnP
service, the AXIS 206/206M will automatically be detected and displayed on your screen.
page 12 for more information.
See
•Use AXIS IP Utility (see page 13) to discover the IP address. This can also be used to set
the IP addess manually.
• Set the IP address manually with the ARP/Ping method, as described on page 14.
• The default static IP address for the AXIS 206/206M is 192.168.0.90
page 11.
TM
One-click Installation
Requirements:
Computer
on a LAN
The AXIS Internet Dynamic DNS Service
• The One-click installation procedure uses the AXIS Internet Dynamic DNS Service. This free service allows you to quickly
and simply install your camera, which then receives a static name (DNS name). More information about the AXIS
Internet Dynamic DNS Service is available at www.axiscam.net
• Please note that this procedure will send the AXIS 206’s IP address, firmware version, product type and serial number to
the Axis Internet Dynamic DNS Service. No personal information is transferred.
• To remove the DNS name and unregister from the Axis Internet Dynamic DNS Service, open the Setup pages in the AXIS
206, click System Options > Network > TCP/IP, click the Settings button for the AXIS Internet Dynamic DNS Service
and finally, click the Remove button.
AXIS 206/206M (AXIS 206W via
wireless connection)
Broadband router/modem providing automatic IP addressing
Internet
AXIS 206 - Install the AXIS 206/206M
Follow these instructions:
1. When the camera is connected to the power supply and the network, wait for the
Status Indicator on the front of the camera to show a steady green.
12
2. Now press the Control button on the rear of the camera once
. The Status indicator will
blink green while it connects to the AXIS Internet Dynamic DNS Service.
3. Wait for the Status indicator to go back to showing a steady green.
4. To complete the installation, now visit www.axiscam.net from an Internet connected
PC. This must be done within 60 minutes of pressing the Control button.
5. Follow the on-screen instructions provided by the AXIS Internet Dynamic DNS
Service. You will need your product’s serial number (see the label on the rear panel) to
complete the installation.
6. Please see page 17 for instructions on how to set the password.
UPnP™
UPnP functionality is enabled by default in the AXIS 206. If also enabled on your computer
(Windows ME or XP), the camera will automatically be detected and a new icon will be
added to “My Network Places.” Click this icon to access the camera. See
instructions on how to set the password.
Notes:
•To install the UPnP service on your computer, open the Control Panel from the Start Menu and
select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then select UPnP as the service to add.
•Once the AXIS 206 is accessible from your computer, it is then possible to use the One-click
installation method to provide the camera with a DNS name.
page 19 for
UPnP™ is a certification mark of the UPnP™ Implementers Corporation.
AXIS 206 - Install the AXIS 206/206M
13
AXIS IP Utility
AXIS IP Utility 2.0 is a free
Windows application that
discovers and displays Axis
devices
on your network. The
Requirements:
Computer
on a LAN
AXIS 206/206M (AXIS 206W via
wireless connection)
Hub/Switch
application can also be used to
manually set a static IP address.
AXIS IP Utility 2.0 is available
on the CD supplied with the
AXIS 206. Updated versions of AXIS IP Utility may be available at www.axis.com
Automatic discovery
1. When connected to the power supply and the network, wait for the Status Indicator on
the front of the camera to show a steady green.
2. Insert the CD into your computer’s CD drive.
3. Start AXIS IP Utility. When the AXIS 206 appears in the window, double-click it to
open its home page. If the camera is not accessible, this might be because its IP address
is not valid on that network. Right-click on the camera to set the IP address manually.
Set the IP address manually
1. If the AXIS 206 does not appear in the window at all, click the Refresh button to try
again. If the camera still does not appear, you can set the IP address manually. Acquire
an unused IP address on the same subnet as your computer.
2. Click the button “Set IP address using serial number” and enter the serial number (see
page 10) and IP address for the AXIS 206. Follow the on
Note:
After using AXIS IP Utility, the AXIS 206 can be assigned a DNS name by using the AXIS Dynamic DNS
Service. See page 11.
-screen instructions.
AXIS 206 - Install the AXIS 206/206M
Manual Installation with ARP/Ping
1. Acquire an unused IP address for the AXIS 206/206M. This IP address must be on the
same subnet as your computer.
2. Locate the serial number (S/N) on the label on the camera’s rear panel.
3. From a computer on your network, open a Command Prompt (in Windows: from the
Start menu, select Run... and type cmd in the field. Click OK).
4. As appropriate for your operating system, enter the following commands:
Windows syntax: Windows example:
14
arp -s <IP Address> <Serial Number>
ping -l 408 -t <IP Address>
UNIX/Linux/Mac syntax: UNIX/Linux/Mac example:
arp -s <IP Address> <Serial Number> temp
ping -s 408 <IP Address>
arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
5. Check that the network cable is connected (or that the wireless connection is
functioning). Start/restart the camera by disconnecting and reconnecting the power
cable.
6. Close the Command prompt when you see ‘Reply from 192.168.0.125: ...’
7. The IP address has been set when the Power indicator is permanently lit and the
Network indicator flashes intermittently.
8. Start your browser, enter the IP address of the camera in the Location/Address field and
press Enter on your keyboard. See below for instructions on how to set the password.
Note:
After installation, the AXIS 206 can be assigned a DNS name by using the AXIS Dynamic DNS Service.
See page 11.
Loading...