Axis XWP10A User Manual

CROUSE-HINDS

SERIES

Oxalis camera stations

XWP10A

Explosion -Protected Pressure Washer Tank

Product Overview:

The XWP10A pressurised washer tank is designed speciﬁcally for use with XF, XT and XP Series explosion-protected camera stations where the integral washer pump has not been speciﬁed.

The XWP10A can be manually pressurised to 4 bar for a maximum head height of 20 meters and features an ATEX-approved solenoid release valve that can be Switched independently or via the telemetry receiver card contained within the camera station housing.

The Casing is constructed from 316L stainless steel for maximum corrosion protection optimised for use with cameras stations located in onshore, offshore, marine and heavy industrial environments.

The XWP10A pressurised washer tank can also be used with third party housings subject to compatibility.

Product features:

• ATEX Ex emb Approved

• IP67 ingress protected solenoid

• Suitable for use in zones 1, 2, 21 & 22

• Onshore, Offshore, Marine & Heavy Industrial Applications

• For Use With XF , XT & XP Series Camera Stations

• 316L Stainless Steel Case Construction

• 2 Switching Options: Independently (230 VAC, 110 VAC, 24 VAC or 24 VDC) Telemetry Receiver (24 VAC)

• Available for Use With Third Party Housings

Specifications

General

Application Zones 1, 2, 21 and 22.

Onshore, Offshore, Marine and Heavy Industrial

ATEX Certification (Solenoid Valve) ATEX II 2 G Ex emb II T4, T5, T6 (with Terminal Box) KEMA 98ATEX2542X,

IECEX KEM 08.002X

Part Number XWP10A-24

XWP10A-24DC XWP10A-110 XWP10A-230

Ingress Protection Rating Solenoid valve: IP67

Features

Pressure Gauge Standard

Capacity 10 litres

Head Height Up to 20m at 4 Bar Pressure

Electrical

Solenoid Voltage 24 VAC, 24 VDC, 115 VAC OR 230 VAC

Power Consumption Max 10 Watts

Mechanical

Construction 316L Stainless Steel

Mounting Options Free Standing or Wall Mount

Cable Entry 2 X 40 mm Dia Entry Holes, side and bottom

Operating Temp -20°C to +60°C

Weight 25Kg (Full)

Size 711 x 438 x 260 mm (H x W x D)

Dimensions and Fixing

Eaton Masons Road Stratford-upon-Avon Warwickshire CV37 9NB United Kingdom

T: +44 (0) 1789 775 775

All specications, dimensions, weights and tolerances are nominal (typical) and Eaton reserve the right to vary all data without prior notice.

No liability is accepted for any consequence of use.

Eaton is a registered trademark.

All other trademarks are property of their respective owners.