Axis VB3 Operator’s Manual
Döner-Grillmachine
INSTALLATION - USER -
MAINTENANCE MANUAL
SERIAL NR:
YEAR OF MANUFACTURE:
AXIS EQUIPMENT ®
MVP GROUP CORPORATION 5659 ROYALMOUNT MONTREAL, QC. CANADA H4P 2P9
Tel: (514)737-9701 Fax: (514)342-3854
www.mvpgroupcorp.com www.axis-equipment.com
Issued on: 23.05.2007
VER . 07.1
TABLE OF CONTENTS
1 – PREFACE
1.1 – Use of Installation – Operation & Maintenance Manual
2 – INSTALLATION INSTRUCTIONS
2.1 – Technical Instructions for Gas Connections
2.2 – Installation of the Appliance
2.3 – Technical Specifications
2.3.1 – Table of Burners Depending on the Injector Type of Gas Used
2.3.2 – Technical Specifications of Gas Döner-Grillmachine
2.3.3 – Instructions for Gas Conversions
2.3.4 – Gas System Diagram
2.4 – Motor
2.5 – Gas Connection Diagram
2.5.1 – Döner-Grillmachine with Motor on Top
2.5.1 – Döner-Grillmachine with Motor on Top
3 – OPERATION AND MAINTENANCE INSTRUCTIONS
3.1 – Installing the Appliance
3.1.1 – Motor on Top Type Döner-Grillmachine
3.1.2 – Motor at Bottom Type Döner-Grillmachine
3.2 – Purpose of Use
3.3 – Warnings
3.4 – Operation
3.5 – Operation with Motor
3.5.1 – Döner-Grillmachine with Motor on Top
3.5.2 – Döner-Grillmachine with Motor at Bottom
3.6 – Operation without Motor
2.5.1 – Motor on Top Type Döner-Grillmachine
3.5.2 – Motor at Bottom Type Döner-Grillmachine
3.7 – Clean-Up
3.8 – Maintenance
4 – WARRANTY
1 - PREFACE
Dear User,
Thank you for purchasing our AXIS product and for your confıdence in our
company. Our appliances are produced in compliance with international
standards. IMPORTANT: Please read and ensure that all users read this manual
in order to achieve the desired performance that you expect; and to enable you
to use this AXIS appliance for many years.
☞ Please read and ensure that your operation personnel read this user’s
manual carefully before installing and using the appliance.
☞ The manual containing information about installation, usage and
maintenance of our product you purchased should be read carefully.
Please ensure that power supply connections to the appliance are already
installed by qualified personnel according to local regulations, before our
authorized service arrive for any service work to this appliance. If our
authorized service determines that the necessary repair(s) to be done are a
result of the faulty installation on your part, the warranty shall not be covered.
☞ If you do not have enough information, please contact our customer
service department either by phone at 1-514-737-9701 or e-mail at:
service@mvpgroupcorp.com
☞ We expect you to have the best performance from our product!
1.1 – Use of Installation – Operation & Maintenance Manual
Dear customer please read this User’s Manual carefully in order to prevent your
appliance from damages, and to achieve maximum efficiency throughout the
economic life of the appliance.
AN ELECTRICAL AND GAS INSTALLATION COMPLYING WITH THE RELEVANT
LOCAL REGULATIONS MUST BE PRESENT AT THE FACILITY, BUILDING AND SIMILAR SITE
WHERE THE DÖNER-GRILLMACHINE WILL BE INSTALLED; NECESSARY PRECAUTIONS
MUST ALSO BE TAKEN TO ENSURE HEALTH AND MATERIAL SAFETY.
OTHERWISE OUR COMPANY WILL NOT BE RESPONSIBLE FOR THE
CONSEQUENCES.
!
The appliance should be operated under well ventilated conditions. The ventilation
system must be of non-flammable character, and the ventilation funnel must be free
of any obstruction.
!
Power supply cords and gas connection hoses of the appliance installed by
!
2 – INSTALLATION INSTRUCTONS
2.1 – Technical Instructions for Gas Connections
Initial installation and operation of the appliance must be carried out by an Authorized
Service in compliance with technical requirements and local directives related to gas
connections.
All gas connections of the appliance must comply with ISO 7 – 1 or ISO 228 – 1
standard.
2.2 – Installation of the Appliance
The appliance must be installed on a stable, even and balanced ground made of stainless
steel. This stainless steel surface must be in a form preventing fat from flowing down from the
surface and spilling The appliance should never be installed on a plastic or wooden surface. It
must be installed so that at least 20 cm distance is maintained between the appliance and the
wall, during its use.
Gas connections of the döner-grillmachine must be done in compliance with the regulations in
force.
2.3 – Technical Specifications
The manufacturer reserves the rights to alter design and specifications without notice
GAS TYPE
Natural Gas
7” – 8” WC
Propan
10” - 13” WC
POS
Machine Type
Burner Injector Diameter (mm)
1
3GD*
1,35
0,90
2
4GD*
1,35
0,90
3
4GUD*
1,35
0,90
4
44GUD*
1,35
0,90
2 – INSTALLATION INSTRUCTONS
Nominal power of the appliance cannot be changed upon customer’s request.
Any modification made on valves and injectors, leaves the appliance out of
warranty coverage. Otherwise our company will not be responsible for the
consequences.
2.3.1 – Table of Burners Depending on the Injector Type of Gas Used
* Each burner capacity:
3.25 kW
Poz.
Product
Nr.
Power (BTU)
Meat Capacity
(Kg)
Weight (kg)
Skewer length
(inch)
Dimensions (HxWxD)
(inch)
1
3GD
33268,38
40 kg
24 kg
28,98
38,85x17,72x22,4
2
4GD
44357.84
80 kg
27 kg
35,43
45,27x17,72x22,4
3
4GUD
44357.84
90 kg
34 kg
35,43
42,15x20,86x25,59
4
44GUD
44357.84+44357.
84
90+90 kg
68 kg
35,43/35,43
42,15x41,73x25,59
2 – INSTALLATION INSTRUCTONS
PLEASE FOLLOW THE INSTRUCTIONS BELOW TO USE THE ROTISSERIE
APPLIANCE WITH A GAS TYPE VARYING FROM REGIONAL REQUIREMENTS!
2.3.2 – Technical Specifications of Gas Döner-Grillmachines
2.3.3 – Instructions for Gas Conversions
Gas conversions should only be carried out by staff qualified in gas conversion.
Close the valves of the gas line or gas bottle supplying gas to the appliance.
Disconnect gas connection of the appliance.
Loosen the screws of the back panel and remove back panel of the appliance
Demount and remove the tubes between the gas valve and the burners.
By displacing its splint remove the connection, where the injectors on the
burner are attached.
Install appropriate type of injectors for the gas type to be used, on burner
connections.
Install the splint and the connection back and tighten.
Loading...