Axis P5624-E Installation Manual

INSTALLATION GUIDE

AXIS P5624-E PTZ Dome Network Camera

Legal Considerations

Video surveillance can be prohibited by laws that vary from
country to country. Check the laws in your local region
before using this product for surveillance purposes.
This product includes one (1) H.264 decoder license. To
purchase further licenses, contact your reseller.

Liability

Every care has been taken in the preparation of this
document. Please inform your local Axis office of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and fitness for
a particular purpose. Axis Communications AB shall not be
liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance or
use of this material. This product is only to be used for its
intended purpose.

Intellectual Property Rights

Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of the
patents listed at http://www.axis.com/patent.htm and one or
more additional patents or pending patent applications in
the US and other countries.
This product contains licensed third-party software. See the
menu item “About” in the product’s user interface for more
information.
This product contains source code copyright Apple Computer,
Inc., under the terms of Apple Public Source License 2.0 (see
www.opensource.apple.com/apsl). The source code is
available from developer.apple.com/darwin/projects/bonjour/

Equipment Modifications

This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no user-serviceable
components. Unauthorized equipment changes or
modifications will invalidate all applicable regulatory
certifications and approvals.

Trademark Acknowledgments

AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX
are registered trademarks or trademark applications of Axis
AB in various jurisdictions. All other company names and
products are trademarks or registered trademarks of their
respective companies.
Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer,
Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW are registered
trademarks of the respective holders. Java and all Java-based
trademarks and logos are trademarks or registered
trademarks of Oracle and/or its affiliates. UPnPTM is a
certification mark of the UPnPTM Implementers Corporation.
SD, SDHC and SDXC are trademarks or registered trademarks
of SD-3C, LLC in the United States, other countries or both.
Also, miniSD, microSD, miniSDHC, microSDHC, microSDXC
are all trademarks or registered trademarks of SD-3C, LLC in
the United States, other countries or both.

Warranty

www.axis.com/warranty

Regulatory Information
Europe

This product complies with the applicable CE marking
directives and harmonized standards:

• Electromagnetic Compatibility (EMC) Directive
2004/108/EC. See Electromagnetic Compatibility (EMC).

• Low Voltage (LVD) Directive 2006/95/EC. See Safety.

• Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU. See Disposal and Recycling.

A copy of the original declaration of conformity may be
obtained from Axis Communications AB. See Contact
Information.

Electromagnetic Compatibility (EMC)

This equipment has been designed and tested to fulfill
applicable standards for:

• Radio frequency emission when installed according to the
instructions and used in its intended environment.

• Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used in its
intended environment.

USA

Using an unshielded network cable (UTP) – This equipment
has been tested using an unshielded network cable (UTP) and
found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Using a shielded network cable (STP) – This equipment has
also been tested using a shielded network cable (STP) and
found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.
The product shall be connected using a shielded network
cable (STP) that is properly grounded.

Canada

This digital apparatus complies with CAN ICES-3 (Class B).
The product shall be connected using a shielded network
cable (STP) that is properly grounded.
Cet appareil numérique est conforme à la norme
CAN NMB-3 (classe B). Le produit doit être connecté à
l'aide d'un câble réseau blindé (STP) qui est correctement
mis à la terre.

Europe

This digital equipment fulfills the requirements for RF

emission according to the Class B limit of EN 55022. The
product shall be connected using a shielded network cable
(STP) that is properly grounded.
This product fulfills the requirements for emission and
immunity according to EN 50121-4 and IEC 62236-4 railway
applications.
This product fulfills the requirements for immunity according
to EN 61000-6-1 residential, commercial and light-industrial
environments.
This product fulfills the requirements for immunity according
to EN 61000-6-2 industrial environments. This product
fulfills the requirements for immunity according to EN 55024
office and commercial environments.

Australia/New Zealand

This digital equipment fulfills the requirements for RF
emission according to the Class B limit of AS/NZS CISPR 22.
The product shall be connected using a shielded network
cable (STP) that is properly grounded.

Korea

Japan

Safety

This product complies with IEC/EN/UL 60950-1 and
IEC/EN/UL 60950-22, Safety of Information Technology
Equipment. The product shall be grounded either through a
shielded network cable (STP) or other appropriate method.
The power supply used with this product shall fulfill the
requirements for Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS) according to IEC/EN/UL 60950-1.

Disposal and Recycling

When this product has reached the end of its useful life,
dispose of it according to local raws and regulations. For
information about your nearest designated collection point,
contact your local authority responsible for waste disposal.
In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.

Europe

This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE) is applicable in
the European Union member states. To prevent
potential harm to human health and the environment, the
product must be disposed of in an approved and
environmentally safe recycling process. For information
about your nearest designated collection point, contact your
local authority responsible for waste disposal. Businesses
should contact the product supplier for information about
how to dispose of this product correctly.
This product complies with the requirements of Directive
2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment

ࢇ Е ɼࢽࡈ% ࢷ࢕ળࢶଢԻ۰ ࣯Ի
ɼࢽ߾۰ یࡈଜЕ ʨࡶ ּࢶࡳԻ ଜֲ ֻҘ 
ࠇ߾۰ یࡈଟ ܹ ࢑ݡТЬ ࢶࢸ஢ ࢻѹ 673
VKLHOGHG WZLVWHG SDLU ৼࢇٴࡶ یࡈଜࠆ ࢿ૽
ࡶࠉʼଜݫݤࠝ

この装置は、クラスB 情報技術装置です。この装置
は、家庭環境で使用することを目 的としています
が、この装置がラジオやテレビジョン受信機に近
接して使用されると、 受信障害を引き起こすこと
があります。 取扱説明書に従って正しい取り扱い
をして下さい。 本製品は、シールドネットワーク
ケーブル(STP)を使用して接続してください。また
適切に接地してください。

(RoHS).

China

This product complies with the requirements of the
legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).

Contact Information

Axis Communications AB
Emdalavägen 14
22369Lund
Sweden
Tel: [phone]
Fax: [phone]
www.axis.com

Support

Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response. If you
are connected to the Internet, you can:

• download user documentation and software updates

• find answers to resolved problems in the FAQ database.
Search by product, category, or phrase

• report problems to Axis support staff by logging in to your
private support area

• chat with Axis support staff (selected countries only)

• visit Axis Support at www.axis.com/techsup/

Should you require any technical assistance, please contact
appropriate channels according to your AVHS license
agreement to ensure a rapid response.

Learn More!

Visit Axis learning center www.axis.com/academy/ for useful
trainings, webinars, tutorials and guides.

English

Safety Instruction

• The Axis product should be installed by a trained
professional. Observe relevant national and local
regulations for the installation.

• The Axis product shall be used in compliance with local
laws and regulations.

• Store the Axis product in a dry and ventilated environment.

• Avoid exposing the Axis product to shocks or heavy
pressure.

• Do not install the product on unstable brackets, surfaces or
walls.

• Use only applicable tools when installing the Axis product.
Excessive force could cause damage to the product.

• Do not use chemicals, caustic agents, or aerosol cleaners.
Use a clean cloth dampened with pure water for cleaning.

• Use only accessories that comply with technical
specification of the product. These can be provided by Axis
or a third party.

• Use only spare parts provided by or recommended by Axis.

• Do not attempt to repair the product by yourself. Contact
Axis support or your Axis reseller for service matters

• Use a limited power source (LPS) with either a rated output
power limited to <100 W or a rated output current limited
to <5 A.

• To comply with the IP66-rated design of the camera and
maintain the IP66 protection, the supplied RJ45 Push-pull
Connector (IP66) shall be used. Alternatively, use the RJ45

IP66-rated cable with premounted connector which is
available from your Axis reseller. Do not remove the plastic
network connector shield from the camera.

• The AXIS product shall be connected using a shielded
network cable (STP). All cables connecting the product to
the midspan shall be shielded (STP) and intended for their
specific use. Make sure that the midspan is properly
grounded.

Transportation

• When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the product.

Battery

The Axis product uses a 3.0 V CR2032 lithium battery as the
power supply for its internal real-time clock (RTC). Under
normal conditions this battery will last for a minimum of five
years.
Low battery power affects the operation of the RTC, causing
it to reset at every power-up. A log message will appear
when the battery needs replacing.
The battery should not be replaced unless required, but if the
battery does need replacing, contact Axis support at
www.axis.com/techsup/ for assistance.

• Dispose of used batteries according to the manufacturer's
instructions.

• Risk of explosion if the battery is incorrectly replaced.

• Replace only with an identical battery or a battery which is
recommended by Axis.

• Dispose of used batteries according to local regulations or
the battery manufacturer's instructions.

Dome Cover Cleaning

• Be careful not to scratch, damage or leave fingerprints on
the dome cover because this could decrease image quality.
If possible, keep the protective plastic on the dome cover
until the installation is complete.

• Do not clean a dome cover that looks clean to the eye and
never polish the surface. Excessive cleaning could damage
the surface.

• For general cleaning of the dome cover it is recommended
to use a non-abrasive, solvent-free neutral soap or
detergent mixed with pure water and a soft, clean cloth.
Rinse well with pure lukewarm water. Dry with a soft,
clean cloth to prevent water spotting.

• Never use harsh detergents, gasoline, benzene or acetone
etc. and avoid cleaning the dome cover in direct sunlight or
at elevated temperatures.

Français

Consignes de sécurité

• Le produit Axis doit être installé par un professionnel
formé.

Lisez attentivement le présent Guide d'installation avant
d'installer le produit Axis. Conservez le Guide d'installation
pour une utilisation ultérieure.

• Le produit Axis doit être utilisé conformément aux lois et

réglementations locales en vigueur.

• Conserver ce produit Axis dans un environnement sec et
ventilé.

• Ne pas exposer ce produit Axis aux chocs ou aux fortes
pressions.

• Ne pas installer ce produit sur des supports, surfaces ou
murs instables.

• Utiliser uniquement des outils recommandés pour
l'installation de l'appareil Axis. Une force excessive
appliquée sur l'appareil pourrait l'endommager.

• Ne pas utiliser de produits chimiques, de substances
caustiques ou de nettoyants pressurisés. Utiliser un chiffon
propre imbibé d'eau pure pour le nettoyage.

• Utiliser uniquement des accessoires conformes aux
caractéristiques techniques du produit. Ils peuvent être
fournis par Axis ou un tiers.

• Utiliser uniquement les pièces de rechange fournies ou
recommandées par Axis.

• Ne pas essayer de réparer ce produit par vous-même.
Contacter l'assistance technique d'Axis ou votre revendeur
Axis pour des problèmes liés à l'entretien.

• Utilisez une source d'alimentation limitée (LPS) dont la
puissance de sortie nominale est limitée à <100 W ou dont
le courant de sortie nominal est limité à <5 A.

• Pour être conforme à la norme IP66 de la caméra et
maintenir la protection IP66, il est nécessaire d'utiliser le
connecteur pousser-tirer RJ45 fourni (conforme à la norme
IP66). Sinon, utilisez le câble RJ45 compatible norme IP66
avec connecteur préinstallé, disponible auprès d'un
revendeur Axis. Ne retirez pas le blindage en plastique du
connecteur réseau de la caméra.

• Le produit AXIS doit être connecté à l'aide d'un câble
réseau blindé (STP). Tous les câbles reliant le produit à
l'injecteur doivent être blindés (STP) et destinés à leur
usage spécifique. Assurez-vous que l'injecteur est
convenablement mis à la terre.

Transport

• Lors du transport du produit Axis, utilisez l'emballage
d'origine ou l'équivalent pour éviter d'endommager le
produit.

Batterie

Le produit Axis utilise une batterie au lithium CR2032 3,0 V
comme alimentation de son horloge en temps réel interne
(RTC). Dans des conditions normales, cette batterie a une
durée de vie minimale de cinq ans.
Une batterie faible affecte le fonctionnement du RTC,
entraînant sa réinitialisation à chaque mise sous tension. Un
message de journal apparaît lorsque la batterie doit être
remplacée.
La batterie doit être remplacée uniquement en cas de besoin,
et pour le faire, contactez l'assistance
technique d'Axis à l'adresse www.axis.com/techsup/ pour
obtenir de l'aide

• Risque d'explosion si la batterie est remplacée de façon
incorrecte.

• Remplacez-la uniquement par une batterie identique ou
une batterie recommandée par Axis.

• Mettez au rébut les piles usagées conformément aux
réglementations locales ou aux instructions du fabricant de
la batterie

Couvercle de dôme

• Veillez à ne pas rayer, endommager ou laisser d'empreintes

sur le couvercle du dôme car cela pourrait altérer la qualité
d'image. Laissez, si possible, la protection en plastique sur
le couvercle du dôme jusqu’à la fin de l’installation.

• Ne nettoyez pas le couvercle du dôme s'il semble propre à
l'oeil nu et ne frottez jamais sa surface. Un nettoyage
excessif pourrait endommager la surface.

• Pour le nettoyage général du couvercle du dôme, il est
recommandé d'utiliser un produit non abrasif, un savon
neutre sans solvant ou un détergent mélangé avec de l'eau
pure et un chiffon doux propre. Rincez bien à l'eau tiède
pure. Séchez avec un chiffon doux et propre pour éviter les
tâches d'eau.

• N'utilisez jamais de détergents agressifs, d'essence, de
benzène ou d'acétone, etc. et évitez toute exposition
directe aux rayons du soleil ou à des températures élevées
lors du nettoyage

Deutsch

Sicherheitsvorkehrungen

• Das Axis Produkt muss von fachmännischem Personal

installiert werden.

• Die Anwendung des Axis Produkts muss unter Beachtung
der örtlich geltenden rechtlichen Bestimmungen erfolgen.

• Lagern Sie das Axis Produkt in einer trockenen und
belüfteten Umgebung.

• Achten Sie darauf, dass das Axis Produkt weder Stößen
noch starkem Druck ausgesetzt ist.

• Installieren Sie das Produkt nicht an instabilen
Halterungen, Oberflächen oder Wänden.

• Verwenden Sie bei der Installation des Axis Produkts
ausschließlich passende Werkzeuge.

• Ein zu großer Kraftaufwand kann das Produkt beschädigen.

• Verwenden Sie keine chemischen, ätzenden oder
aerosolhaltigen Reinigungsmittel.

• Verwenden Sie zum Reinigen ein sauberes, mit sauberem
Wasser angefeuchtetes Tuch.

• Verwenden Sie nur Zubehör, das den technischen Daten
des Produkts entspricht. Dieses ist von Axis oder
Drittanbietern erhältlich.

• Verwenden Sie ausschließlich Ersatzteile die von Axis
bereitgestellt oder empfohlen werden.

• Versuchen Sie nicht, das Produkt selbstständig zu
reparieren. Wenden Sie sich bezüglich Reparatur und
Wartung an den Axis Support oder Ihren Axis Händler..

• Verwenden Sie eine Stromquelle mit begrenzter Leistung
(LPS), entweder mit einer Nennausgangsleistung von
<100 W oder einem dauerhaft auf <5 A begrenzten
Nennausgangsstrom.

• Verwenden Sie den im Lieferumfang
enthaltenenRJ45-Anschluss zum Stecken/Ziehen(IP66), um
die IP66-Einstufung der Kamerabauweise einzuhalten und
den IP66-Schutz beizubehalten. Sie können auch das
RJ45-Kabel mit IP66-Rating und vorbelegtem Stecker
verwenden. Dieses erhalten Sie bei Ihrem Axis Händler.
Entfernen Sie nicht die Kunststoffabschirmung des
Anschlusses von der Kamera.

• Das AXIS-Produkt sollte mit einem abgeschirmten
Netzwerkkabel (STP) angeschlossen werden. Alle Kabel, die
das Produkt mit dem Midspan verbinden, sollten
abgeschirmt (STP) und nur für die bestimmte Anwendung
eingesetzt werden. Stellen Sie sicher, dass der Midspan
vorschriftsmäßig geerdet ist.

Transport

• Bei Bedarf Axis Produkt in der Originalverpackung oder
entsprechenden Verpackung transportieren, so dass
Schäden vermieden werden..

Batterie

Das Axis Produkt ist mit einer 3,0 V CR2032 Lithium-Batterie
ausgestattet, mit der die interne Echtzeituhr (RTC) versorgt
wird. Unter normalen Konditionen hat die Batterie eine
Lebensdauer von mindestens fünf Jahren.
Bei entladener Batterie ist der Betrieb der Echtzeituhr nicht
mehr ausreichend gewährleistet, so dass die Uhr bei jedem
Systemstart zurückgesetzt wird. Sie erhalten eine
Protokollnachricht, wenn ein Batteriewechsel erforderlich ist.
Batterie nur ersetzen wenn erforderlich. In diesem Fall
kontaktieren Sie bitte den Axis Support
www.axis.com/techsup/ für Unterstützung.

• Explosionsgefahr bei fehlerhaftem Batteriewechsel.

• Ersetzen Sie nur durch eine identische Batterie oder einer
von Axis empfohlenen Batterie.

• Verbrauchte Batterien sind gemäß örtlicher Bestimmungen
oder Herstelleranweisungen zu entsorgen..

Kuppelabdeckung

• Achten Sie darauf die Kuppelabdeckung weder zu
zerkratzen, zu beschädigen oder darauf Fingerabdrücke zu
hinterlassen, da dies die Bildqualität beeinträchtigen kann.
Falls möglich entfernen Sie die Schutzfolie erst nachdem
die Installation abgeschlossen ist.

• Säubern Sie niemals eine Kuppelabdeckung, wenn diese
sauber erscheint, und polieren Sie keinesfalls die
Oberfläche. Zu häufiges Säubern kann die Oberfläche
beschädigen.

• Für die normale Reinigung der Kuppelabdeckung werden
eine nicht-scheuernde, lösungsmittelfreie neutrale Seife
oder ein entsprechendes Reinigungsmittel mit
sauberemWasser und ein sauberer, weicher Lappen
empfohlen. Spülen Sie die Kuppelabdeckung gründlich mit
lauwarmem sauberem Wasser ab. Trocknen Sie die
Kuppelabdeckung mit einem weichen, sauberen Lappen,
um Wasserflecken zu vermeiden.

• Verwenden Sie niemals starke Reinigungsmittel, Benzin,
Benzol oder Aceton etc. und vermeiden Sie, die
Kuppelabdeckung im direkten Sonnenlicht oder bei
erhöhten Temperaturen zu säubern.

Italiano

Istruzioni di sicurezza

• Il prodotto Axis deve essere installato da un professionista
qualificato.

• Il prodotto Axis deve essere utilizzato in conformità alle
leggi e alle disposizioni locali.

• Conservare il prodotto Axis in un ambiente asciutto e
ventilato.

• Evitare di esporre il prodotto Axis a urti o pressioni
eccessive.

• Non installare il prodotto su supporti, superfici o pareti
instabili.

• Utilizzare solo strumenti applicabili quando si installa il
prodotto Axis. Una forza eccessiva può causare danni al
prodotto.

• Non utilizzare sostanze chimiche, agenti caustici o

detergenti aerosol. Utilizzare un panno pulito inumidito in
acqua pura per la pulizia.

• Utilizzare solo accessori compatibili con le specifiche
tecniche del prodotto. Questi possono essere forniti da Axis
o da terze parti.

• Utilizzare solo parti di ricambio fornite o consigliate da
Axis.

• Non tentare di riparare il prodotto da soli. Contattare
l'assistenza o il rivenditore Axis per questioni relative alla
manutenzione

• Utilizzare una sorgente di alimentazione limitata (LPS) sia
con una potenza di uscita nominale limitata a <100 W o
una corrente nominale di uscita limitata a <5 A.

• È necessario utilizzare il Connettore push-pull RJ45 (IP66)
in dotazione per mantenere inalterate le caratteristiche di
tenuta e protezione di classe IP66 della telecamera. In
alternativa, utilizzare il cavo RJ45 di classe IP66 con
connettore premontato disponibile presso il proprio
rivenditore Axis. Non rimuovere la schermatura in plastica
del connettore di rete dalla telecamera.

• Il prodotto AXIS deve essere collegato con un cavo di rete
schermato (STP). Tutti i cavi che collegano il prodotto al
midspan devono essere schermati (STP) e destinati al loro
uso specifico. Assicurarsi che il midspan sia collegato a
terra correttamente.

Trasporto

• Durante il trasporto del prodotto Axis, utilizzare
l'imballaggio originale o equivalente per evitare danni al
prodotto.

Batteria

Il prodotto Axis utilizza una batteria al litio da 3,0 V CR2032
come alimentazione per il suo real-time clock (RTC) interno.
In condizioni normali questa batteria avrà una durata
minima di cinque anni.
Una bassa carica della batteria influisce sul funzionamento
del RTC, facendolo resettare ad ogni accensione. Un
messaggio di registro viene visualizzato quando la batteria
deve essere sostituita.
La batteria non deve essere sostituita se non richiesto, ma nel
caso in cui ci fosse la necessità di sostituirla, contattare il
supporto Axis all'indirizzo www.axis.com/techsup/ per
assistenza

• Rischio di esplosione se la batteria viene sostituita in modo
errato.

• Sostituire solo con una batteria identica o una batteria
consigliata da Axis.

• Smaltire le batterie usate in base alle normative locali o
alle istruzioni del produttore della batteria. duttore.

Coperchio della cupola

• Fare attenzione a non graffiare, danneggiare o lasciare
impronte sul coperchio della cupola, perché potrebbe
diminuire la qualità dell'immagine. Se possibile, tenere la
protezione in plastica sul coperchio della cupola fino a
quando l'installazione non sarà completata.

• Non pulire il coperchio della cupola che allo sguardo
sembra pulito e non lucidare la superficie. Una pulizia
eccessiva potrebbe danneggiare la superficie.

• Per la pulizia generale del coperchio della cupola, si
consiglia di utilizzare un sapone neutro o detergente non
abrasivo con acqua pura e un panno morbido e pulito.
Sciacquare bene con acqua pura tiepida. Asciugare con un
panno morbido e pulito per evitare macchie d'acqua.

• Non usare mai detergenti aggressivi, benzina, benzene o
acetone ecc. ed evitare di pulire il coperchio della cupola

alla luce diretta del sole o a temperature elevate.

Español

Instrucciones de seguridad

El encargado de instalar el producto de Axis debe ser un
profesional con experiencia.

• El producto de Axis debe utilizarse de acuerdo con las leyes
y normas locales.

• Almacene el producto de Axis en un entorno seco y
ventilado.

• Evite la exposición del producto de Axis a choques o a una
fuerte presión.

• No instale el producto en soportes, superficies o paredes
inestables.

• Utilice solo las herramientas correspondientes cuando
instale el producto de Axis. La aplicación de una fuerza
excesiva puede provocar daños en el producto.

• No utilice limpiadores en aerosol, agentes cáusticos ni
productos químicos. Limpie con un trapo limpio
humedecido con agua pura.

• Utilice solo accesorios que cumplan con las
especificaciones técnicas del producto. Estos accesorios los
puede proporcionar Axis o un tercero.

• Utilice solo piezas de repuesto proporcionadas o
recomendadas por Axis.

• No intente reparar el producto usted mismo. Póngase en
contacto con el soporte técnico de Axis o con su
distribuidor de Axis para tratar asuntos de reparación

• Use una fuente de alimentación limitada (LPS) con una
potencia nominal de salida limitada a <100 W o una
corriente nominal de salida limitada a <5 A.

• Para cumplir con el diseño de la clasificación IP66 de la
cámara y mantener la protecciónIP66, debe usarse el
conector RJ45 con clasificación IP66 suministrado. Como
alternativa, use el cable RJ45 con clasificación IP66 con el
conector montado previamente disponible en su
distribuidor de Axis. No retire la protección del conector de
red de plástico de la cámara.

• El producto de AXIS se conectará mediante un cable de red
blindado (STP). Todos los cables que conecten el producto
al midspan deberán estar blindados (STP) y diseñados para
su uso específico. Asegúrese de que el midspan disponga de
una conexión a tierra adecuada..

Transporte

• A la hora de transportar el producto Axis, utilice el
embalaje original o uno equivalente para no dañar el
producto.

Batería

El producto Axis utiliza una batería de litio CR2032 de 3,0 V
como fuente de alimentación para su reloj de tiempo real
interno (RTC). En condiciones normales, esta batería durará
un mínimo de cinco años.
Cuando la batería tiene poca carga, el funcionamiento del
RTC se puede ver afectado, ya que esto puede hacer que se
reinicie cada vez que se encienda. Aparecerá un mensaje de
información cuando sea necesario sustituir la batería. La
batería no debe ser reemplazada a no ser que sea necesario y,
si es necesario, contacte con el soporte técnico de Axis
www.axis.com/techsup/ para obtener ayuda

• Riesgo de explosión si la batería se sustituye de forma
incorrecta.

• Haga la sustitución únicamente con una batería idéntica o
que esté recomendada por Axis.

• Deseche las baterías usadas según las instrucciones del
fabricante o las normas locales

Cubierta del domo

• Preste atención a no arañar, dañar o dejar las huellas en la
cubierta del domo, puesto que esto puede provocar una
disminución de la calidad de imagen. Si es posible,
mantenga el plástico de protección en la cubierta del domo
hasta que se complete la instalación.

• No limpie la cubierta del domo si parece a simple vista que
está limpia y nunca pula la superficie. Una limpieza
excesiva podría dañar la superficie.

• Para realizar un procedimiento de limpieza general de la
cubierta del domo se recomienda usar detergente o jabón
neutros, sin disolventes y no abrasivos mezclados con agua
pura, y un trapo suave y limpio. Enjuague bien con agua
pura y tibia. Seque con un trapo limpio y suave para evitar
las manchas de gotas de agua.

• Nunca utilice detergentes abrasivos, gasolina, benceno,
acetona, etc. y evite limpiar la cubierta del domo a
temperaturas elevadas o en contacto directo con la luz
solar

AXIS P5624-E Installation Guide Page 9

RJ-45
Push Pull
connector
Installation
Guide

1x

1x

1x1x

1x

1x

Page 10 AXIS P5624-E Installation Guide

1

12

T20

4x

AXIS P5624-E Installation Guide Page 11

2

3

12

4x

T20

1.0 Nm
(0.74 lb ft)