Axis F1005-E Installation Manual

INSTALLATION GUIDE

ENGLISH

DEUTSCH

ITALIANO

ESPAÑOL

日本語

FRAN

Ç
AIS

AXIS F1005-E Sensor Unit

About this Document

This document includes instructions for
installing AXIS F1005-E Sensor Unit.
Previous experience of networking will
be beneficial when installing the
product.

Legal Considerations

Video and audio surveillance can be
prohibited by laws that vary from
country to country. Check the laws in
your local region before using this
product for surveillance purposes.

Trademark Acknowledgments

Apple, Boa, Bonjour, Ethernet, Internet
Explorer, Linux, Microsoft, Mozilla,
Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW
are registered trademarks of the
respective holders. Java and all Java­based trademarks and logos are
trademarks or registered trademarks of
Oracle and/or its affiliates. UPnP

TM

is a

certification mark of the UPnP

TM

Implementers Corporation.

Electromagnetic Compatibility
(EMC)

This equipment has been designed and
tested to fulfill applicable standards
for:

• Radio frequency emission when
installed according to the
instructions and used in its intended
environment.

• Immunity to electrical and
electromagnetic phenomena when
installed according to the
instructions and used in its intended
environment.

USA - This equipment has been tested

using a shielded network cable (STP)
and found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference

in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:

• Reorient or relocate the receiving
antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.

• Consult the dealer or an experienced
radio/TV technician for help.

Canada - This Class B digital

apparatus complies with Canadian
ICES-003.

Europe - This digital equipment

fulfills the requirements for RF
emission according to the Class B limit
of EN 55022.
The product shall be connected using a
shielded network cable (STP) that is
properly grounded.
This product fulfills the requirements
for emission and immunity according
to EN 50121-4 and IEC 62236-4
railway applications.
This product fulfills the requirements
for immunity according to EN 61000­6-1 residential, commercial and light­industrial environments. This product
fulfills the requirements for immunity
according to EN 61000-6-2 industrial
environments.
This product fulfills the requirements

for immunity according to EN 55024
office and commercial environments

Australia/ New Zealand - This

digital equipment fulfills the
requirements for RF emission
according to the Class B limit of
AS/NZS CISPR 22. The product shall be
connected using a shielded network
cable (STP) that is properly
grounded.

Safety

This product complies with IEC/EN/
UL 60950-1 and IEC/EN/UL 60950-22,
Safety of Information Technology
Equipment.

Equipment Modifications

This equipment must be installed and
used in strict accordance with the
instructions given in the user
documentation. This equipment
contains no user-serviceable
components. Unauthorized equipment
changes or modifications will
invalidate all applicable regulatory
certifications and approvals.

Liability

Every care has been taken in the
preparation of this document. Please
inform your local Axis office of any
inaccuracies or omissions. Axis

この装置は、クラスB 情報技術装置です。この装置
は、家庭環境で使用することを目 的としています
が、この装置がラジオやテレビジョン受信機に近
接して使用されると、 受信障害を引き起こすこと
があります。 取扱説明書に従って正しい取り扱い
をして下さい。 本製品は、シールドネットワーク
ケーブル(STP)を使用して接続してください。また
適切に接地してください。

ࢇ Е ɼࢽࡈ% ࢷ࢕ળࢶଢԻ۰ ࣯Ի
ɼࢽ߾۰ یࡈଜЕ ʨࡶ ּࢶࡳԻ ଜֲ ֻҘ 
ࠇ߾۰ یࡈଟ ܹ ࢑ݡТЬ ࢶࢸ஢ ࢻѹ 673
VKLHOGHG WZLVWHG SDLU ৼࢇٴࡶ یࡈଜࠆ ࢿ૽
ࡶࠉʼଜݫݤࠝ

Communications AB cannot be held
responsible for any technical or
typographical errors and reserves the
right to make changes to the product
and documentation without prior
notice. Axis Communications AB makes
no warranty of any kind with regard to
the material contained within this
document, including, but not limited
to, the implied warranties of
merchantability and fitness for a
particular purpose. Axis
Communications AB shall not be liable
nor responsible for incidental or
consequential damages in connection
with the furnishing, performance or use
of this material. This product is only to
be used for its intended purpose.

RoHS

This product complies with
both the European RoHS
directive, 2002/95/EC, and the
Chinese RoHS regulations, ACPEIP.

WEEE Directive

The European Union has
enacted a Directive 2002/96/
EC on Waste Electrical and
Electronic Equipment (WEEE
Directive). This directive is
applicable in the European Union
member states.
The WEEE marking on this product (see
right) or its documentation indicates
that the product must not be disposed
of together with household waste. To
prevent possible harm to human health
and/or the environment, the product
must be disposed of in an approved and
environmentally safe recycling process.
For further information on how to
dispose of this product correctly,
contact the product supplier, or the
local authority responsible for waste
disposal in your area.
Business users should contact the
product supplier for information on

how to dispose of this product
correctly. This product should not be
mixed with other commercial waste.

Support

Should you require any technical
assistance, please contact your Axis
reseller. If your questions cannot be
answered immediately, your reseller
will forward your queries through the
appropriate channels to ensure a rapid
response. If you are connected to the
Internet, you can:

• download user documentation and
firmware updates

• find answers to resolved problems in
the FAQ database. Search by product,
category, or phrases

• report problems to Axis support by
logging in to your private support
area

• chat with Axis support staff (selected
countries only)

• visit Axis Support at www.axis.com/
techsup/

Learn More!

Visit Axis learning center
www.axis.com/academy/ for useful
trainings, webinars, tutorials and
guides.

Warranty

www.axis.com/warranty

AXIS F1005-E Sensor Unit Page 5

ENGLISH

AXIS F1005-E Sensor Unit

1. Sensor unit head

2. Camera connector

R >18 mm (5/8 in)

Min bending radius for cable

1

2

16 mm
(5/8 in)

35 mm
(1 3/8 in)

Ø30 mm
(Ø1 3/16 in)

M20x1.5
Ø20 mm
Ø13/16 in)

Page 6 AXIS F1005-E Sensor Unit

Ø22 mm
(Ø7/8 in)