Axis D101-A XF P3807 Explosion-Protected Network Camera Installation Guide

SPECTRUM D101-(X)-P3807-BD Series

Explosion Proof Network Camera
Installation Manual

D101-A-P3807-PVE-BD REV 0 105607312018 D

SERIES INSTALLATION MANUAL REV-1

1

This pageintentionallyleftblank

SERIES INSTALLATION MANUAL REV-1

2D101-A-P3807-PVE-BD REV 0 105607312018 D

Information in this document is subject to change without notice. All terms

07/23/2020

mentioned in this manual that are known to be trademarks have been
appropriately capitalized. Spectrum Camera Solutions LLC acknowledges
all trademark(s) and the rights of the trademark(s) owned by the company
referred to herein.

Release Date:02/05/2020

Document Name D101-A-P3807-PVE-BD

© Copyright 2019 by Spectrum Camera Solutions LLC All rights

reserved

Revision Record

Rev. Description Date

0 Initial Release

D101-A-P3807-PVE-BD REV 0 105607312018 D

SERIES INSTALLATION MANUAL REV-1

3

Copyright Notice:

This document contains information proprietary to Spectrum Camera Solutions LLC
with all rights reserved worldwide. Any reproduction or disclosure of this publication,
or any part thereof, to persons other than Spectrum Camera Solutions, Inc.
personnel or customers is strictly prohibited, except by written permission of
Spectrum Camera Solutions, Inc. Unauthorized use, disclosure, reproduction, or
translation of this publication will result in Spectrum Camera Solutions, Inc.
exercising maximum possible legal action against all persons and / or organizations
involved.

Disclaimer:

Spectrum Camera Solutions LLC makes no representations or warranties with
respect to the contents hereof. Further, Spectrum Camera Solutions LLC reserves
the right to revise this publication and to make changes in the content hereof, without
obligation to notify any person or organization of such revision or changes.

Patent Notice:

Manufactured under United States US Patent 9917428 & US Patent D858611

Trademark Information:

Spectrum Camera Solutions LLC and its logo(s) are trademark(s) of Spectrum
Camera Solutions LLC.

D101-A-P3807-PVE-BD REV 0 105607312018 D

SERIES INSTALLATION MANUAL REV-1

4

Table of Contents

Legal Notices and Revision History Inside front cover

DESCRIPTION 6

MODEL MATRIX 7

LABELS 8

STANDARDS AND CERTIFICATIONS 9

DOCUMENT SYMBOLS 10

HOW TO USE THIS MANUAL 11

Page

GENERAL SAFETY AND OPERATING INFORMATION 12

SPECIFICATIONS 15

UNBOXING 17

HARDWARE BOM 18

WIRING ENTRIES 19

INSTALLATION 20

DIMENTIONAL GENERAL ASSEMBLY 25

DISMANTLING & MAINTENANCE 26

MOUNTING OPTIONS 28

D101-A-P3807-PVE-BD REV 0 105607312018 D

SERIES INSTALLATION MANUAL REV-1

5

DESCRIPTION

The “D” Series includes a full range of Stainless Steel or Anodized Aluminum camera stations
specifically designed for Hazardous Area Applications.

Spectrum’s D Series is the first Class I II III Division 1 rated dome style explosion proof
housings and utilizes the most robust and advanced camera technologies available. The D
Series was designed with the integrator in mind and offers features not available in competing
EX camera systems available in the market. The solution is Patented with features including a
uniform constructed enclosure consisting of an integrated junction box milled directly to the
camera housing. This eliminates the need for extra equipment, reduces installation time,
reduces labor expenses, and increases safety by lessening the potential for mismatched
hazardous rated components. Additionally, the D Series are constructed with a proprietary
explosion resistant polymer blend offering maximum clarity and enhance optical performance.
To enhance optical performance, the explosion proof lens is equipped with our Virtual Wiper
Nano Technology. The series are available in anodized aluminum or 316L Stainless steel
ensuring protection against rain, dust and corrosion within a wide temperature range between ­20°C to 55°C. This feature ensures operation under extreme weather conditions and hazardous
environments. It is suitable for monitoring wide open indoor/outdoor spaces such as refineries,
wellheads, pipelines, offshore installations, remote and harsh locations where high-level
reliability and precision are always required.

D101-A-P3807-PVE-BD REV 0 105607312018 D

SERIES INSTALLATION MANUAL REV-1

6

Option A- Model Matrix- D100-D500*

CODE “XX”

01

D(N)(XX)-(1)-(CCCCCC)-BD

N=(1) HOUSING LENGTH=3.32 in
N=(2) HOUSING LENGTH=7.75 in
N=(3) HOUSING LENGTH=4.5 in
N=(4) HOUSING LENGTH=5 in
N=(5) HOUSING LENGTH= 5.5 in
XX= Internal Equipment Manufacturer Code**
1= (A) Aluminum Housing with SS 316L Dome Ring
1= (S) Stainless Steel 316L Housing
C= Internal Equipment Part Number from Manufacturer***
BD= Optional Breather drain model****
*Internal components and D Series must be approved by Spectrum
**Internal Equipment Manufacturer Code below
***Must be approved and verified by Spectrum
****Models supplied with Breather Drains will have IP66 ingress protection level

Manufacture
AXIS COMMUNICATIONS

D101-A-P3807-PVE-BD REV 0 105607312018 D

SERIES INSTALLATION MANUAL REV-1

7

Labels Option A

BREATHER DRAIN MODEL

BREATHER DRAIN MODEL

SERIES INSTALLATION MANUAL REV-1

8D101-A-P3807-PVE-BD REV 0 105607312018 D

STANDARDS & CERTIFICATIONS

STANDARDS-

The equipment is manufactured in accordance with the IECEX scheme, the ATEX Directive 94/9CE and with the
following standards :
IEC 60079-0:2011
IEC 60079-1:2014
IEC 60079-31:2013
IEC 60529:2013
EN 60079-0:2012 + A11:2013
EN 60079-1:2014
EN 60079-31:2014
EN 60529:1991 + A1:2000 + A2:2013
ANSI/ISA 60079-0:2013
ANSI/UL 60079-1:2015
ANSI/ISA 60079-31:2015
ANSI/IEC 60529:2004
CAN/CSA-C22.2 No. 60079-0:2015
CAN/CSA-C22.2 No. 60079-1:2016
CAN/CSA-C22.2 No. 60079-31:2015
CAN/CSA-C22.2 No. 60529:2016

Specific Conditions of Use:

-The flameproof joints of the equipment are not intended to be repaired. Consult the manufacturer if dimensional
information on the flameproof joints is necessary.

-Follow the manufacturer’s instructions to reduce the potential of an electrostatic charging hazard on the surface
of the equipment in Group II and III environments.

-The equipment meets the requirements according to the low-level risk of mechanical danger. Therefore, the
equipment shall be located and installed such that the risk of impact or other mechanical damage is reduced or
avoided.

CERTIFICATIONS-

CERT NO. FM17US0156X & FM18CA0103X
Class I Division 1 Groups B,C,D T6, Ta = -20°C to +55°CType 4X, IP66
Class II/III, Division 1, Groups E,F,G T6 Type 4X, IP66 Ta = -20°C to +55°C
Class I, Zone 1, AEx/Ex db IIB+H2 T6 Gb Ta = -20°C to +55°C, Type 4X, IP66
Zone 21, AEx/Ex tb IIIC T85°C Db Ta = -20°C to +55°C, Type 4X, IP66
CERT NO. FM18ATEX0057X & IECEx FMG 18.0020X
II 2 G Ex db IIB+H2 T6 Gb Ta = -20°C to +55°C, IP66
II 2 D Ex tb IIIC T85°C Db Ta = -20°C to +55°C, IP66

SERIES INSTALLATION MANUAL REV-1

9D101-A-P3807-PVE-BD REV 0 105607312018 D

DOCUMENT SYMBOLS

The following symbols are used throughout this manual to alert users to potential
hazards or important information. Failure to heed the warnings and cautions listed

herein can lead to injury and equipment damage.

Symbol Label Description

WARNING:

CAUTION:

Consists of conditions, practices, or procedures that
must be observed to prevent personal injury and/or
equipment damage.

Risk of electric shock or high temperature parts may
result in injury if proper precautions are not taken.

NOTE:

Emphasizes important or essential information.

Locating Information:

NOTE: In the interest of completeness, manuals and drawings included with the

system may provide information pertaining to options not included with your
equipment. Information in application notes supersedes general information in
these documents. Information can be in this manual using any of the following aids.

SERIES INSTALLATION MANUAL REV-1

10D101-A-P3807-PVE-BD REV 0 105607312018 D