Axis F34 Installation Guide

INSTALLATION GUIDE

AXIS F34 Main Unit

Legal Considerations

Video surveillance can be prohibited by
laws that vary from country to country.
Check the laws in your local region
before using this product for
surveillance purposes.
This product includes one (1) H.264
decoder license. To purchase further
licenses, contact your reseller.

Liability

Every care has been taken in the
preparation of this document. Please
inform your local Axis office of any
inaccuracies or omissions. Axis
Communications AB cannot be held
responsible for any technical or
typographical errors and reserves the
right to make changes to the product
and manuals without prior notice. Axis
Communications AB makes no
warranty of any kind with regard to the
material contained within this
document, including, but not limited
to, the implied warranties of
merchantability and fitness for a
particular purpose. Axis
Communications AB shall not be liable
nor responsible for incidental or
consequential damages in connection
with the furnishing, performance or use
of this material. This product is only to
be used for its intended purpose.

Intellectual Property Rights

Axis AB has intellectual property rights
relating to technology embodied in the
product described in this document. In
particular, and without limitation,
these intellectual property rights may
include one or more of the patents
listed at http://www.axis.com/
patent.htm and one or more additional
patents or pending patent applications
in the US and other countries.
This product contains licensed third­party software. See the menu item
“About” in the product’s user interface

for more information.
This product contains source code
copyright Apple Computer, Inc., under
the terms of Apple Public Source
License 2.0 (see
www.opensource.apple.com/apsl). The
source code is available from
developer.apple.com/darwin/projects/
bonjour/

Equipment Modifications

This equipment must be installed and
used in strict accordance with the
instructions given in the user
documentation. This equipment
contains no user-serviceable
components. Unauthorized equipment
changes or modifications will
invalidate all applicable regulatory
certifications and approvals.

Trademark Acknowledgments

AXIS COMMUNICATIONS, AXIS, ETRAX,
ARTPEC and VAPIX are registered
trademarks or trademark applications
of Axis AB in various jurisdictions. All
other company names and products are
trademarks or registered trademarks of
their respective companies.
Apple, Boa, Apache, Bonjour, Ethernet,
Internet Explorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW
are registered trademarks of the
respective holders. Java and all Java­based trademarks and logos are
trademarks or registered trademarks of
Oracle and/or its affiliates. UPnPTM is a
certification mark of the UPnPTM
Implementers Corporation.
SD, SDHC and SDXC are trademarks or
registered trademarks of SD-3C, LLC in
the United States, other countries or
both. Also, miniSD, microSD, miniSDHC,
microSDHC, microSDXC are all
trademarks or registered trademarks of
SD-3C, LLC in the United States, other
countries or both.

Regulatory Information
Europe

This product complies with the
applicable CE marking directives
and harmonized standards:

• Electromagnetic Compatibility (EMC)
Directive 2004/108/EC. See
Electromagnetic Compatibility (EMC).

• Low Voltage (LVD) Directive 2006/95/
EC. See Safety.

• Restrictions of Hazardous Substances
(RoHS) Directive 2011/65/EU. See
Disposal and Recycling.

A copy of the original declaration of
conformity may be obtained from Axis
Communications AB. See Contact
Information.

Electromagnetic Compatibility
(EMC)

This equipment has been designed and
tested to fulfill applicable standards
for:

• Radio frequency emission when
installed according to the
instructions and used in its intended
environment.

• Immunity to electrical and
electromagnetic phenomena when
installed according to the
instructions and used in its intended
environment.

USA

Using an unshielded network cable
(UTP) – This equipment has
been tested using an unshielded
network cable (UTP) and found to
comply with the limits for a Class A
digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This
equipment generates, uses, and can
radiate radio frequency energy and, if

not installed and used in accordance
with the instruction manual, may cause
harmful interference to radio
communications. Operation of this
equipment in a residential area is likely
to cause harmful interference in which
case the user will be required to correct
the interference at his own expense.

This equipment has been tested using a
shielded network cable (STP)
and found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:

• Reorient or relocate the receiving
antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.

• Consult the dealer or an experienced
radio/TV technician for help.

The product shall be connected using a
shielded network cable (STP)
that is properly grounded.

Canada

Korea -

ࢇЕɼࢽࡈ%ࢷ࢕ળࢶଢԻ۰

࣯Իɼࢽ߾۰یࡈଜЕʨࡶּࢶࡳԻଜֲֻҘ
ࠇ߾۰یࡈଟܹ࢑ݡТЬ

This digital apparatus complies with
CAN ICES-3 (Class B). The product
shall be connected using a shielded
network cable (STP) that is properly
grounded.
Cet appareil numérique est conforme à
la norme CAN NMB-3 (classe B).
Le produit doit être connecté à l'aide
d'un câble réseau blindé (STP) qui
est correctement mis à la terre.

Europe

This digital equipment fulfills the
requirements for RF emission
according to the Class B limit of EN

55022. The product shall be connected
using a shielded network cable (STP)
that is properly grounded.
This product fulfills the requirements
for immunity according to EN 61000­6-1 residential, commercial and light­industrial environments.
This product fulfills the requirements
for immunity according to
EN 61000-6-2 industrial environments.
This product fulfills the requirements
This product fulfills the requirements
for immunity according to EN 55024
residential and commercial
environments.

Australia/New Zealand

This digital equipment fulfills the
requirements for RF emission
according to the Class B limit of AS/
NZS CISPR 22. The product shall
be connected using a shielded network
cable (STP) that is properly
grounded.

Korea

Japan

Japan -

この装置は、クラスB 情報技術装置です。
この装置は、家庭環境で使用することを目 的として
いますが、この装置がラジオやテレビジョン受信機
に近接して使用されると、 受信障害を引き起こすこ
とがあります。 取扱説明書に従って正しい取り扱い
をして下さい。

Safety

This product complies with IEC/EN/UL
60950-1. Safety of Information
Technology Equipment. The product
shall be grounded either through a
shielded network cable (STP) or other
appropriate method.
The power supply used with this
product shall fulfill the requirements
for Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS) according
to IEC/EN/UL 60950-1.

Disposal and Recycling

When this product has reached the end
of its useful life, dispose of it according
to local raws and regulations. For
information about your nearest
designated collection point, contact
your local authority responsible for
waste disposal. In accordance with
local legislation, penalties may be
applicable for incorrect disposal of this
waste.

Europe

This symbol means that the
product shall not be disposed
of together with household
or commercial waste.
Directive 2012/19/EU on
waste electrical and electronic
equipment (WEEE) is applicable in the
European Union member states. To
prevent potential harm to human
health and the environment, the
product must be disposed of in an
approved and environmentally safe
recycling process. For information
about your nearest designated

collection point, contact your local

www.axis.com/warranty

authority responsible for waste
disposal. Businesses should contact the
product supplier for information about
how to dispose of this product
correctly.
This product complies with the
requirements of Directive 2011/65/EU
on the restriction of the use of certain
hazardous substances in electrical and
electronic equipment (RoHS).

China

This product complies with the
requirements of the legislative
act Administration on the
Control of Pollution Caused by
Electronic Information Products
(ACPEIP).

Contact Information

Axis Communications AB
Emdalavägen 14
22369Lund
Sweden
Tel: [phone]
Fax: [phone]
www.axis.com

Support

Should you require any technical
assistance, please contact your Axis
reseller. If your questions cannot be
answered immediately, your reseller
will forward your queries through the
appropriate channels to ensure a rapid
response. If you are connected to the
Internet, you can:

• download user documentation and
software updates

• find answers to resolved problems in
the FAQ database. Search by product,
category, or phrase

• report problems to Axis support staff
by logging in to your private support
area

• chat with Axis support staff (selected
countries only)

• visit Axis Support at www.axis.com/

techsup/
Should you require any technical
assistance, please contact appropriate
channels according to your AVHS
license agreement to ensure a rapid
response.

Learn More!

Visit Axis learning center
www.axis.com/academy/ for useful
trainings, webinars, tutorials and
guides.

Warranty

English

Safeguards

Please read through this Installation
Guide carefully before installing the
Axis product. Keep the Installation
Guide for further reference.

• Store the Axis product in a dry and

ventilated environment.

• Avoid exposing the Axis product to

vibration, shocks or heavy pressure.

Do not install the product on

unstable brackets, unstable or

vibrating surfaces or walls, since this

could cause damage to the product.

• Only use applicable tools when

installing the Axis product; excessive

force could cause damage to the

product.

• Do not use chemicals, caustic agents,

or aerosol cleaners. Use a damp cloth

for cleaning.

• Use only accessories that comply