Axis 0810-003 User Manual

Download

Page 1

AXISM1065-LWNetworkCamera

UserManual

Page 2

AboutthisDocument

ThismanualisintendedforadministratorsandusersofAXISM1065-LW NetworkCamera,andisapplicabletormware6.15andlater.It includesinstructionsforusingandmanagingtheproductonyour network.Previousexperienceofnetworkingwillbeofusewhenusing thisproduct.SomeknowledgeofUNIXorLinux-basedsystemsmay alsobeusefulwhendevelopingshellscriptsandapplications.Later versionsofthisdocumentwillbepostedatwww .axis.com.Seealsothe product’sonlinehelp,availablethroughtheweb-basedinterface.

LegalConsiderations

Videoandaudiosurveillancecanberegulatedbylawsthatvaryfrom countrytocountry.Checkthelawsinyourlocalregionbeforeusing thisproductforsurveillancepurposes.

Thisproductincludesone(1)H.264decoderlicenseandone(1)AAC decoderlicense.Topurchasefurtherlicenses,contactyourreseller.

Liability

Everycarehasbeentakeninthepreparationofthisdocument.Please informyourlocalAxisofceofanyinaccuraciesoromissions.Axis CommunicationsABcannotbeheldresponsibleforanytechnicalor typographicalerrorsandreservestherighttomakechangestothe productandmanualswithoutpriornotice.AxisCommunicationsAB makesnowarrantyofanykindwithregardtothematerialcontained withinthisdocument,including,butnotlimitedto,theimplied warrantiesofmerchantabilityandtnessforaparticularpurpose.Axis CommunicationsABshallnotbeliablenorresponsibleforincidentalor consequentialdamagesinconnectionwiththefurnishing,performance oruseofthismaterial.Thisproductisonlytobeusedforitsintended purpose.

IntellectualPropertyRights

AxisABhasintellectualpropertyrightsrelatingtotechnologyembodied intheproductdescribedinthisdocument.Inparticular,andwithout limitation,theseintellectualpropertyrightsmayincludeoneormore ofthepatentslistedatwww.axis.com/patent.htmandoneormore additionalpatentsorpendingpatentapplicationsintheUSandother countries.

Thisproductcontainslicensedthird-partysoftware.Seethemenuitem “About”intheproduct’suserinterfaceformoreinformation.

ThisproductcontainssourcecodecopyrightAppleComputer, Inc.,underthetermsofApplePublicSourceLicense2.0(see

www.opensource.apple.com/apsl).Thesourcecodeisavailablefrom https://developer.apple.com/bonjour/

EquipmentModications

Thisequipmentmustbeinstalledandusedinstrictaccordancewiththe instructionsgivenintheuserdocumentation.Thisequipmentcontains nouser-serviceablecomponents.Unauthorizedequipmentchangesor modicationswillinvalidateallapplicableregulatorycertications andapprovals.

TrademarkAcknowledgments

AXISCOMMUNICATIONS,AXIS,ETRAX,ARTPECandVAPIXare registeredtrademarksortrademarkapplicationsofAxisABinvarious jurisdictions.Allothercompanynamesandproductsaretrademarksor registeredtrademarksoftheirrespectivecompanies.

Apple,Boa,Apache,Bonjour,Ethernet,InternetExplorer ,Linux, Microsoft,Mozilla,Real,SMPTE,QuickTime,UNIX,Windows,Windows VistaandWWWareregisteredtrademarksoftherespectiveholders. JavaandallJava-basedtrademarksandlogosaretrademarksor registeredtrademarksofOracleand/oritsafliates.UPnP certicationmarkoftheUPnP

SD,SDHCandSDXCaretrademarksorregisteredtrademarksofSD-3C, LLCintheUnitedStates,othercountriesorboth.Also,miniSD,microSD, miniSDHC,microSDHC,microSDXCarealltrademarksorregistered trademarksofSD-3C,LLCintheUnitedStates,othercountriesorboth.

WPA,WPA2andWi-FiProtectedSetuparemarksoftheWi-FiAlliance.

ImplementersCorporation.

isa

RegulatoryInformation

Europe

Thisproductisintendedforindooruseonly. ThisproductcomplieswiththeapplicableCEmarkingdirectivesand

harmonizedstandards:

•ElectromagneticCompatibility(EMC)Directive2014/30/EU.See

ElectromagneticCompatibility(EMC)onpage2.

•RadioandTelecommunicationsTerminalEquipment(R&TTE)

Directive1999/5/EC.SeeRadioTransmissiononpage2.

•LowVoltage(LVD)Directive2014/35/EU.SeeSafetyonpage3.

•RestrictionsofHazardousSubstances(RoHS)Directive201 1/65/EU.

SeeDisposalandRecyclingonpage3. Acopyoftheoriginaldeclarationofconformitymaybeobtainedfrom AxisCommunicationsAB.SeeContactInformationonpage3.

ElectromagneticCompatibility(EMC)

Thisequipmenthasbeendesignedandtestedtofulllapplicable standardsfor:

•Radiofrequencyemissionwheninstalledaccordingtothe

instructionsandusedinitsintendedenvironment.

•Immunitytoelectricalandelectromagneticphenomenawhen

installedaccordingtotheinstructionsandusedinitsintended

environment.

USA

Thisequipmenthasbeentestedusingashieldednetworkcable(STP) andfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttopart15oftheFCCRules.Theselimitsaredesigned toprovidereasonableprotectionagainstharmfulinterferenceina residentialinstallation.Thisequipmentgenerates,usesandcanradiate radiofrequencyenergyand,ifnotinstalledandusedinaccordance withtheinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterference willnotoccurinaparticularinstallation.Ifthisequipmentdoes causeharmfulinterferencetoradioortelevisionreception,which canbedeterminedbyturningtheequipmentoffandon,theuseris encouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdifferentfrom

thattowhichthereceiverisconnected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Theproductshallbeconnectedusingashieldednetworkcable(STP) thatisproperlygrounded.

Canada

ThisdigitalapparatuscomplieswithCANICES-3(ClassB).Theproduct shallbeconnectedusingashieldednetworkcable(STP)thatis properlygrounded.Cetappareilnumériqueestconformeàlanorme CANNMB-3(classeB).Leproduitdoitêtreconnectéàl'aided'uncâble réseaublindé(STP)quiestcorrectementmisàlaterre.

Europe

ThisdigitalequipmentfulllstherequirementsforRFemission accordingtotheClassBlimitofEN55032.Theproductshallbe connectedusingashieldednetworkcable(STP)thatisproperly grounded.

Thisproductfulllstherequirementsforimmunityaccording toEN61000-6-1residential,commercialandlight-industrial environments.

Thisproductfulllstherequirementsforimmunityaccordingto EN61000-6-2industrialenvironments.

Thisproductfulllstherequirementsforimmunityaccordingto EN55024ofceandcommercialenvironments.

Korea

이기기는가정용(B급)전자파적합기기로서주로가정에 서사용하는것을목적으로하며,모든지역에서사용할수 있습니다.적절히접지된STP(shieldedtwistedpair)케이 블을사용하여제품을연결하십시오.

RadioTransmission

Thisequipmentmaygenerateoruseradiofrequencyenergy.Theuser couldlosetheauthoritytooperatethisequipmentifanunauthorized changeormodicationismade.

USA

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubject tothefollowingtwoconditions:(1)thisdevicemaynotcauseharmful

Page 3

interference,and(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesirableoperation.

ThisproductcomplieswithFCCradiationexposurelimitsforan uncontrolledenvironment.Thisequipmentshallbeinstalledand operatedwithaminimumdistanceof20cm(7.9in)betweentheuser andthedevice.

Canada

ThisdevicecomplieswithIndustryCanadalicence-exemptRSS standard(s).Operationissubjecttothefollowingtwoconditions:(1) thisdevicemaynotcauseinterference,and(2)thisdevicemustaccept anyinterference,includinginterferencethatmaycauseundesired operationofthedevice. ThisproductcomplieswithICradiationexposurelimitsforan uncontrolledenvironment.Thisequipmentshallbeinstalledand operatedwithaminimumdistanceof20cm(7.9in)betweenthe userandthedevice.Thisdeviceforoperationinthefrequencyband 5150–5250MHzisonlyforindoorusetoreducethepotentialfor harmfulinterferencetoco-channelmobilesatellitesystems. LeprésentappareilestconformeauxCNRd'IndustrieCanada applicablesauxappareilsradioexemptsdelicence.L'exploitationest autoriséeauxdeuxconditionssuivantes:(1)l'appareilnedoitpas produiredebrouillage,et(2)l'utilisateurdel'appareildoitacceptertout brouillageradioélectriquesubi,mêmesilebrouillageestsusceptible d'encompromettrelefonctionnement. Ceproduitestconformeauxlimitesd'expositionauxradiationsICpour unenvironnementnoncontrôlé.L’équipementdoitêtreinstalléet fonctionnéàunedistanceminimumde20cm(7,9po)entrel’utilisateur etledispositif.Danslabandedefréquencesde5150à5250MHz, cetappareildoituniquementêtreutiliséàl’intérieuranderéduirele risquedebrouillagepréjudiciabledesystèmesdeservicemobilepar satellitesetrouvantdanslemêmecanal.

Europe

Hereby,AxisCommunicationsABdeclaresthatthisproductisin compliancewiththeessentialrequirementsandotherrelevant provisionsofDirective1999/5/EC.

ParlaprésenteAxisCommunicationsABdéclarequel’appareil ceproduitestconformeauxexigencesessentiellesetauxautres dispositionspertinentesdeladirective1999/5/CE.

HiermiterklärtAxisCommunicationsAB,dasssichdiesesProduktin ÜbereinstimmungmitdengrundlegendenAnforderungenundden anderenrelevantenVorschriftenderRichtlinie1999/5/EGbendet.

ConlapresenteAxisCommunicationsABdichiarachequestoprodotto èconformeairequisitiessenzialiedallealtredisposizionipertinenti stabilitedalladirettiva1999/5/CE.

PormediodelapresenteAxisCommunicationsABdeclaraqueeleste productocumpleconlosrequisitosesencialesycualesquieraotras disposicionesaplicablesoexigiblesdelaDirectiva1999/5/CE.

AxisCommunicationsABvakuuttaatätenettätämätuotetyyppinen laiteondirektiivin1999/5/EYoleellistenvaatimustenjasitäkoskevien direktiivinmuidenehtojenmukainen.

HierbijverklaartAxisCommunicationsABdathettoestelin overeenstemmingismetdeessentiëleeisenendeandererelevante bepalingenvanrichtlijn1999/5/EG.

HärmedintygarAxisCommunicationsABattdennaproduktstår iöverensstämmelsemeddeväsentligaegenskapskravochövriga relevantabestämmelsersomframgåravdirektiv1999/5/EG.

UndertegnedeAxisCommunicationsABerklærerherved,atfølgende udstyroverholderdevæsentligekravogøvrigerelevantekravidirektiv 1999/5/EF.

AxisCommunicationsABdeclaraqueesteprodutoestáconformecom osrequisitosessenciaiseoutrasdisposiçõesdaDirectiva1999/5/CE.

ΜΕΤΗΝΠΑΡΟΥΣΑAxisCommunicationsABΔΗΛΩΝΕΙΟΤΙ

αυτότοπροϊόνΣΥΜΜΟΡΦΩΝΕΤΑΙΠΡΟΣΤΙΣΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣΚΑΙΤΙΣΛΟΙΠΕΣΣΧΕΤΙΚΕΣΔΙΑΤΑΞΕΙΣΤΗΣ ΟΔΗΓΙΑΣ1999/5/EK.

Thisequipmentcanbeusedinthefollowingcountries: AT,BE,BG,CH,CY ,CZ,DE,DK,EE,EL,ES,FI,FR,HR,HU,IE,IS,IT ,LI,LT,

LU,LV,MT ,NL,NO,PL,PT,RO,SE,SI,SK,TR,UK

Safety

ThisproductcomplieswithIEC/EN/UL60950-1,SafetyofInformation TechnologyEquipment.

Ifitsconnectingcablesareroutedoutdoors,theproductshallbe groundedeitherthroughashieldednetworkcable(STP)orother appropriatemethod.

Thepowersupplyusedwiththisproductshallfullltherequirements forSafetyExtraLowVoltage(SELV)andLimitedPowerSource(LPS) accordingtoIEC/EN/UL60950-1.

PhotobiologicalSafety

Thisproductfulllstherequirementsforphotobiologicalsafety accordingtoIEC/EN62471(riskgroup1).

Battery

TheAxisproductusesa3.0VBR1632lithiumbatteryasthepower supplyforitsinternalreal-timeclock(RTC).Undernormalconditions thisbatterywilllastforaminimumofveyears.

LowbatterypoweraffectstheoperationoftheRTC,causingittoreset ateverypower-up.Whenthebatteryneedsreplacing,alogmessage willappearintheproduct’sserverreport.Formoreinformationabout theserverreport,seetheproduct´ssetuppagesorcontactAxissupport.

Thebatteryshouldnotbereplacedunlessrequired,butifthebattery doesneedreplacing,contactAxissupportatwww.axis.com/techsupfor assistance.

Lithiumcoincell3.0Vbatteriescontain1,2-dimethoxyethane;ethylene glycoldimethylether(EGDME),CASno.1 10-71-4.

WARNING

•Riskofexplosionifthebatteryisincorrectlyreplaced.

•Replaceonlywithanidenticalbatteryorabatterywhichis

recommendedbyAxis.

•Disposeofusedbatteriesaccordingtolocalregulationsor

thebatterymanufacturer'sinstructions.

DisposalandRecycling

Whenthisproducthasreachedtheendofitsusefullife,disposeof itaccordingtolocallawsandregulations.Forinformationabout yournearestdesignatedcollectionpoint,contactyourlocalauthority responsibleforwastedisposal.Inaccordancewithlocallegislation, penaltiesmaybeapplicableforincorrectdisposalofthiswaste.

Europe

Thissymbolmeansthattheproductshallnotbedisposedof togetherwithhouseholdorcommercialwaste.Directive2012/19/EU onwasteelectricalandelectronicequipment(WEEE)isapplicablein theEuropeanUnionmemberstates.Topreventpotentialharmto humanhealthandtheenvironment,theproductmustbedisposed ofinanapprovedandenvironmentallysaferecyclingprocess.For informationaboutyournearestdesignatedcollectionpoint,contact yourlocalauthorityresponsibleforwastedisposal.Businessesshould contacttheproductsupplierforinformationabouthowtodispose ofthisproductcorrectly.

ThisproductcomplieswiththerequirementsofDirective201 1/65/EUon therestrictionoftheuseofcertainhazardoussubstancesinelectrical andelectronicequipment(RoHS).

China

Thisproductcomplieswiththerequirementsofthelegislative actAdministrationontheControlofPollutionCausedbyElectronic InformationProducts(ACPEIP).

ContactInformation

AxisCommunicationsAB Emdalavägen14

Page 4

22369Lund Sweden

Tel:+46462721800 Fax:+4646136130

www.axis.com

Support

Shouldyourequireanytechnicalassistance,pleasecontactyourAxis reseller.Ifyourquestionscannotbeansweredimmediately,your resellerwillforwardyourqueriesthroughtheappropriatechannelsto ensurearapidresponse.IfyouareconnectedtotheInternet,youcan:

•downloaduserdocumentationandsoftwareupdates

•ndanswerstoresolvedproblemsintheFAQdatabase.Search

byproduct,category,orphrase

•reportproblemstoAxissupportstaffbyloggingintoyourprivate

supportarea

•chatwithAxissupportstaff

•visitAxisSupportatwww.axis.com/techsup/

WarrantyInformation

ForinformationaboutAxis’productwarrantyandtheretorelated information,seewww.axis.com/warranty/

LearnMore!

VisitAxislearningcenterwww.axis.com/academy/forusefultrainings, webinars,tutorialsandguides.

Page 5

AXISM1065-LWNetworkCamera

TableofContents

SafetyInformation..........................................7

HazardLevels...................................................7

OtherMessageLevels............................................7

HardwareOverview..........................................8

ConnectorsandButtons..........................................8

LEDIndicators..................................................9

AccesstheProduct..........................................10

AccessfromaBrowser...........................................10

AccessfromtheInternet..........................................10

SettheRootPassword...........................................11

SetPowerLineFrequency.........................................11

TheLiveViewPage..............................................11

MediaStreams.............................................14

HowtoStreamH.264............................................14

MJPEG........................................................14

AXISMediaControl(AMC)........................................14

AlternativeMethodsofAccessingtheVideoStream....................15

AccessAudioStreams............................................16

SetUptheProduct..........................................17

BasicSetup....................................................17

Howtochangethecamerafocus...................................17

VideoandAudio............................................18

SetUpVideoStreams............................................18

Aboutstreamproles............................................20

AboutONVIFmediaproles.......................................20

CameraSettings................................................21

ViewArea.....................................................23

Aboutoverlays..................................................23

Aboutprivacymasks.............................................25

SetUpAudio...................................................25

AudioClips....................................................26

ConguretheLiveViewPage.................................27

PTZ(PanTiltZoom).........................................29

Aboutpresetpositions...........................................29

Aboutguardtours...............................................29

Advanced......................................................29

Detectors..................................................31

Aboutcameratampering.........................................31

Howtoconguretamperingdetection..............................31

Howtocongureanactionrulefortamperingalarm...................31

MotionDetection...............................................31

AudioDetection................................................33

PIRSensor.....................................................33

Applications...............................................34

ApplicationLicenses.............................................34

UploadApplication..............................................34

ApplicationConsiderations........................................34

AXISVideoMotionDetection.................................36

Considerations..................................................36

StartandStoptheApplication.....................................36

CongureApplication............................................36

UsingtheApplicationinanActionRule.............................40

Events....................................................42

SetUpActionRules.............................................42

AddRecipients..................................................44

CreateSchedules................................................45

SetUpRecurrences..............................................45

Recordings.................................................47

FindRecordings.................................................47

PlayRecording..................................................47

ExportVideoClip................................................48

Page 6

AXISM1065-LWNetworkCamera

TableofContents

ContinuousRecording............................................48

Languages.................................................49

SystemOptions.............................................50

Security.......................................................50

Date&Time....................................................52

Network.......................................................53

Storage.......................................................61

Maintenance...................................................64

Support.......................................................64

Advanced......................................................65

ResettoFactoryDefaultSettings...................................65

Troubleshooting............................................67

ChecktheFirmware.............................................67

UpgradetheFirmware...........................................67

Symptoms,PossibleCausesandRemedialActions.....................68

TechnicalSpecications......................................71

PerformanceConsiderations.......................................74

Page 7

AXISM1065-LWNetworkCamera

SafetyInformation

HazardLevels

DANGER

Indicatesahazardoussituationwhich,ifnotavoided,willresultindeathorseriousinjury.

WARNING

Indicatesahazardoussituationwhich,ifnotavoided,couldresultindeathorseriousinjury.

CAUTION

Indicatesahazardoussituationwhich,ifnotavoided,couldresultinminorormoderateinjury.

TICE

NO NO

TICE TICE

Indicatesasituationwhich,ifnotavoided,couldresultindamagetoproperty.

OtherMessageLevels

Important

Indicatessignicantinformationwhichisessentialfortheproducttofunctioncorrectly.

Note

Indicatesusefulinformationwhichhelpsingettingthemostoutoftheproduct.

Page 8

AXISM1065-LWNetworkCamera

HardwareOverview

Forspecicationsofthehardwarecomponents,seeTechnicalSpecicationsonpage71.

Focuslockring

Focusring

IRLED

PIRsensor

Speaker

StatusLED

Controlbutton

WLANpairingbutton

Networkconnector

SDcardslot

Powerconnector

ConnectorsandButtons

NetworkConnector

RJ45Ethernetconnector.

TICE

NO NO

TICE TICE

Theproductshallbeconnectedusingashieldednetworkcable(STP).Allcablesconnectingtheproducttothenetworkshall beintendedfortheirspecicuse.Makesurethatthenetworkdevicesareinstalledinaccordancewiththemanufacturer’s instructions.Forinformationaboutregulatoryrequirements,seeElectromagneticCompatibility(EMC)onpage2.

Powerconnector

ThismicroUSBtypeBconnectorisforpoweronly.WerecommendusingAxismicroUSBpowersupply.

Page 9

AXISM1065-LWNetworkCamera

HardwareOverview

SDcardslot

TICE

NO NO

TICE TICE

•RiskofdamagetoSDcard.Donotusesharptools,metalobjectsorexcessiveforcewheninsertingorremovingthe SDcard.Useyourngerstoinsertandremovethecard.

•Riskofdatalossandcorruptedrecordings.DonotremovetheSDcardwhiletheproductisrunning.Disconnectpoweror unmounttheSDcardfromtheAxisproduct’swebpagesbeforeremoval.

ThisproductsupportsmicroSD/microSDHC/microSDXCcards(notincluded).

ForSDcardrecommendations,seewww.axis.com

ControlButton

Forlocationofthecontrolbutton,seeHardwareOverviewonpage8.

Thecontrolbuttonisusedfor:

•Resettingtheproducttofactorydefaultsettings.Seepage65.

•ConnectingtoanAXISVideoHostingSystemservice.Seepage54.Toconnect,pressandholdthebuttonforabout3

secondsuntiltheStatusLEDashesgreen.

•ConnectingtoAXISInternetDynamicDNSService.Seepage55.Toconnect,pressandholdthebuttonforabout3seconds.

WLANPairingButton

TheWLANpairingbuttonisusedforconnectingtoanaccesspointthroughpushbuttonconguration(PBC),seeWirelessSettingson page57.

LEDIndicators

Note

•TheStatusLEDcanbeconguredtoashwhileaneventisactive.

•TheStatusLEDcanbeconguredtoashforidentifyingtheunit.GotoSetup>SystemOptions>Maintenance.

StatusLED

Unlit

GreenShowssteadygreenfor10secondsfornormaloperationafterstartupcompleted.

Amber

Amber/RedFlashesamber/redifnetworkconnectionisunavailableorlost.

RedFirmwareupgradefailure.

Indication

Connectionandnormaloperation.

Flashesgreenduringwirelessnetworkpairing.

Steadyduringstartup.Flashesduringrmwareupgradeorresettofactorydefault.

Page 10

AXISM1065-LWNetworkCamera

AccesstheProduct

ToinstalltheAxisproduct,seetheInstallationGuidesuppliedwiththeproduct.

Theproductcanbeusedwithmostoperatingsystemsandbrowsers.Werecommendthefollowingbrowsers:

•InternetExplorer

•Safari

•Chrome

ToviewstreamingvideoinInternetExplorer,allowinstallationofAXISMediaControl(AMC)whenprompted.

TheAxisproductincludesone(1)H.264decoderlicenseforviewingvideostreamsandone(1)AACaudiolicense.Thelicensesare automaticallyinstalledwithAMC.Theadministratorcandisabletheinstallationofthedecoderstopreventinstallationofunlicensed copies.

Note

•QuickTime

withOSX

withWindows

orFirefox

withotheroperatingsystems.

isalsosupportedforviewingH.264streamsandforaudio.

AccessfromaBrowser

1.Startawebbrowser.

2.EntertheIPaddressorhostnameoftheAxisproductinthebrowser’sLocation/Addresseld.

ToaccesstheproductfromaMaccomputer(OSX),gotoSafari,clickonBonjourandselecttheproductfromthe drop-downlist.

IfyoudonotknowtheIPaddress,useAXISIPUtilitytolocatetheproductonthenetwork.Forinformationabout howtodiscoverandassignanIPaddress,seethedocumentAssignanIPAddressandAccesstheVideoStreamonAxis Supportwebatwww.axis.com/techsup

Note

ToshowBonjourasabrowserbookmark,gotoSafari>Preferences.

3.Enteryourusernameandpassword.Ifthisisthersttimetheproductisaccessed,therootpasswordmustrstbe

congured.Forinstructions,seeSettheRootPasswordonpage1 1.

4.Theproduct’sLiveViewpageopensinyourbrowser.

Note

ThecontrolsandlayoutoftheLiveViewpagemayhavebeencustomizedtomeetspecicinstallationrequirementsand userpreferences.Consequently,someoftheexamplesandfunctionsfeaturedheremaydifferfromthosedisplayedin yourownLiveViewpage.

AccessfromtheInternet

Onceconnected,theAxisproductisaccessibleonyourlocalnetwork(LAN).ToaccesstheproductfromtheInternetyoumust congureyournetworkroutertoallowincomingdatatrafctotheproduct.Todothis,enabletheNAT-traversalfeature,which willattempttoautomaticallyconguretheroutertoallowaccesstotheproduct.ThisisenabledfromSetup>SystemOptions> Network>TCP/IPAdvanced.

Formoreinformation,seeNATtraversal(portmapping)forIPv4onpage56.SeealsoAXISInternetDynamicDNSServiceat

www.axiscam.net

ForTechnicalnotesonthisandothertopics,visittheAxisSupportwebatwww.axis.com/techsup

Page 11

AXISM1065-LWNetworkCamera

AccesstheProduct

SettheRootPassword

ToaccesstheAxisproduct,youmustsetthepasswordforthedefaultadministratoruserroot.ThisisdoneintheCongureRoot Passworddialog,whichopenswhentheproductisaccessedforthersttime.

Topreventnetworkeavesdropping,therootpasswordcanbesetviaanencryptedHTTPSconnection,whichrequiresanHTTPS certicate.HTTPS(HypertextTransferProtocoloverSSL)isaprotocolusedtoencrypttrafcbetweenwebbrowsersandservers.The HTTPScerticateensuresencryptedexchangeofinformation.SeeHTTPSonpage51.

Thedefaultadministratorusernamerootispermanentandcannotbedeleted.Ifthepasswordforrootislost,theproductmustbe resettothefactorydefaultsettings.SeeResettoFactoryDefaultSettingsonpage65.

TosetthepasswordviaastandardHTTPconnection,enteritdirectlyinthedialog.

TosetthepasswordviaanencryptedHTTPSconnection,followthesesteps:

1.ClickUseHTTPS.

Atemporarycerticate(validforoneyear)iscreated,enablingencryptionofalltrafctoandfromtheproduct,andthe passwordcannowbesetsecurely.

2.Enterapasswordandthenre-enterittoconrmthespelling.

3.ClickOK.Thepasswordhasnowbeencongured.

SetPowerLineFrequency

PowerlinefrequencyissetthersttimetheAxisproductisaccessedandcanonlybechangedfromPlainCong(seepage65) orbyresettingtheproducttofactorydefault.

Selectthepowerlinefrequency(50Hzor60Hz)usedatthelocationoftheAxisproduct.Selectingthewrongfrequencymaycause imageickeriftheproductisusedinuorescentlightenvironments.

Whenusing50Hz,themaximumframerateislimitedto25fps.

Note

Powerlinefrequencyvariesdependingongeographicregion.TheAmericasusuallyuse60Hz,whereasmostotherpartsof theworlduse50Hz.Localvariationscouldapply.Alwayscheckwiththelocalauthorities.

TheLiveViewPage

ThecontrolsandlayoutoftheLiveViewpagemayhavebeencustomizedtomeetspecicinstallationrequirementsanduser preferences.Consequently,someoftheexamplesandfunctionsfeaturedheremaydifferfromthosedisplayedinyourownLiveView page.Thefollowingprovidesanoverviewofeachavailablecontrol.

ControlsontheLiveViewPage

ClicktheViewsizebuttonstoshowtheimageinfullsize(rightbutton)ortoscaledowntheimageto tthebrowserwindow(leftbutton).

SelectastreamprolefortheLiveViewpagefromtheStreamProledrop-downlist.Forinformation abouthowtocongurestreamproles,seepage20.

UsetheManualTriggerbuttontotriggeranactionrulefromtheLiveViewpage.Forinformationabout howtocongureandenablethebutton,seeManualTriggeronpage12.

Page 12

AXISM1065-LWNetworkCamera

AccesstheProduct

ClickSnapshottosaveasnapshotofthevideoimage.Thisbuttonisprimarilyintendedforusewhen theAXISMediaControlviewertoolbarisnotavailable.EnablethisbuttonfromLiveViewCong> ActionButtons.

TheAudioclipdrop-downlistallowsyoutoplayanaudioclipfromtheLiveViewpage.Selectthe audioclipandclickthePlaybutton.

Activateorde-activateIRilluminationfromSetup>Video&Audio>CameraSettings.Enablethis buttonfromLiveViewCong>ActionButtons. MovetheslidertoincreaseordecreasetheintensityoftheIRillumination.

ManualTrigger

TheManualTriggerisusedtotriggeranactionrulefromtheLiveViewpage.Themanualtriggercanforexamplebeusedto validateactionsduringproductinstallationandconguration.

Tocongurethemanualtrigger:

1.GotoSetup>Events.

2.ClickAddtoaddanewactionrule.

3.FromtheTriggerdrop-downlist,selectInputSignal.

4.Fromtheseconddrop-downlist,selectManualTrigger.

5.Selectthedesiredactionandconguretheothersettingsasrequired.

Formoreinformationaboutactionrules,seeEventsonpage42.

ToshowthemanualtriggerbuttonsintheLiveViewpage:

1.GotoSetup>LiveViewCong.

2.UnderActionButtons,selectShowmanualtriggerbutton.

AXISMediaControlviewertoolbar

TheAXISMediaControlviewertoolbarisavailableinInternetExploreronly.SeeAXISMediaControl(AMC)onpage14formore information.Thetoolbardisplaysthefollowingbuttons:

ThePlaybuttonconnectstotheAxisproductandstartsplayingamediastream.

TheStopbuttonstopsthemediastream.

TheSnapshotbuttontakesasnapshotofthevideoimage.

ClicktheViewFullScreenbuttonandthevideoimagewilllltheentirescreen.PressESC(Escape)onthecomputer keyboardtocancelfullscreenview.

TheRecordbuttonisusedtorecordthecurrentvideostreamonyourcomputer.Thelocationwheretherecordingissaved canbespeciedintheAMCControlPanel.EnablethisbuttonfromLiveViewCong>ViewerSettings.

AMCAudioControls

AMCaudiobuttonscontrolthespeakersandmicrophoneconnectedtotheclientcomputer.Thebuttonsareonlyvisiblewhen audioisenabled.

Page 13

AXISM1065-LWNetworkCamera

AccesstheProduct

Forinformationabouthowtocongureaudio,seeSetUpAudioonpage25.

Speakerbutton—Clicktoturnthespeakersonoroff.

Microphonebutton–Clicktomuteorunmutethemicrophone.InSimplex-speakeronlymode,theMicrophoneandTalk

buttonsmustbothbeactivetosendaudiototheAxisproduct.Clickeitherbuttontostopaudiotransmission.

Usetheslidertocontrolthevolumeofthespeakersandthemicrophone.

Half-duplexmode

TheTalk/Listenbuttonisusedtoswitchbetweensendingandreceivingaudio.Thebuttoncanbecongured fromtheAudiotabintheAMCControlpanel:

Simplex–speakeronlymode

Tosendaudio,theTalkandMicrophonebuttonsmustbothbeactive.Clickeitherbuttontostopaudio transmission.

PTZControls

•Push-To-Talkmode:Clickandholdthebuttontotalk/send.Releasethebuttontolisten.

•Togglemode:Clickoncetoswitchbetweentalkingandlistening.

Note

ThesecontrolsareavailableifdigitalPTZisenabledintheselectedviewarea,seeViewAreaonpage23.

ClicktheEmulatejoystickmodebuttonandclickintheimagetomovethecameraviewinthedirectionofthe mousepointer.

ClicktheCentermodebuttonandclickintheimagetocenterthecameraviewonthatposition.

Thecentermodebuttoncouldalsobeusedtozoominonaspecicarea.Clickintheimageanddragtodrawa rectanglesurroundingtheareatobemagnied.Tozoomout,rotatethemousewheel.

SelectaPTZpresetpositiontosteerthecameraviewtothesavedposition.SeeAboutpreset positionsonpage29.

PanandTiltbars–Usethearrowstopanandtiltthecameraview,orclickonapositiononthebartosteerthecameraviewto thatposition.

Zoombar–Usethearrowstozoominandout,orclickonapositiononthebartozoomtothatposition.

ThePTZcontrolscanbedisabledunderPTZ>Advanced>Controls,seeControlsonpage29.

Page 14

AXISM1065-LWNetworkCamera

MediaStreams

TheAxisproductprovidesseveralaudioandvideostreamformats.Yourrequirementsandthepropertiesofyournetworkwill determinethetypeyouuse.

TheLiveViewpageintheproductprovidesaccesstoH.264andMotionJPEGvideostreams,audiostreamsandtothelistofavailable streamproles.Otherapplicationsandclientscanaccessvideoandaudiostreamsdirectly,withoutgoingviatheLiveViewpage.

HowtoStreamH.264

H.264can,withoutcompromisingimagequality,reducethesizeofadigitalvideolebymorethan80%comparedwiththeMotion JPEGformatandasmuchas50%morethantheMPEG-4standard.Thismeansthatmuchlessnetworkbandwidthandstoragespace arerequiredforavideole.Orseenanotherway,muchhighervideoqualitycanbeachievedforagivenbitrate.

Decidingwhichcombinationofprotocolsandmethodstousedependsonyourviewingrequirements,andonthepropertiesof yournetwork.TheavailableoptionsinAXISMediaControlare:

UnicastRTP

RTPoverRTSP

RTPoverRTSPoverHTTP

MulticastRTP

AXISMediaControlnegotiateswiththeAxisproducttodeterminethetransportprotocoltouse.Theorderofpriority,listedinthe AMCControlPanel,canbechangedandtheoptionsdisabled,tosuitspecicrequirements.

Note

H.264islicensedtechnology.TheAxisproductincludesoneH.264viewingclientlicense.Installingadditionalunlicensed copiesoftheclientisprohibited.Topurchaseadditionallicenses,contactyourAxisreseller.

Thisunicastmethod(RTPoverUDP)isused forliveunicastvideo,especiallywhenitis importanttohaveanup-to-datevideostream, evenifsomeframesaredropped.

Thisunicastmethod(RTPtunneledoverRTSP) isusefulasitisrelativelysimpletocongure rewallstoallowRTSPtrafc.

Thisunicastmethodcanbeusedtotraverse rewalls.Firewallsarecommonlyconguredto allowtheHTTPprotocol,thusallowingRTPto betunneled.

Thismethod(RTPoverUDP)shouldbeusedforlivemulticastvideo.Thevideostreamisalways up-to-date,evenifsomeframesaredropped. Multicastingprovidesthemostefcientusageofbandwidthwhentherearelargenumbersof clientsviewingsimultaneously.Amulticastcannothowever,passanetworkrouterunlessthe routerisconguredtoallowthis.ItisnotpossibletomulticastovertheInternet,forexample. Notealsothatallmulticastviewerscountasoneunicastviewerinthemaximumtotalof20 simultaneousconnections.

Unicastingisusedforvideo-on-demand transmissionsothatthereisnovideotrafc onthenetworkuntilaclientconnectsand requeststhestream. Notethatthereareamaximumof20 simultaneousunicastconnections.

MJPEG

ThisformatusesstandardJPEGstillimagesforthevideostream.Theseimagesarethendisplayedandupdatedataratesufcient tocreateastreamthatshowsconstantlyupdatedmotion.

TheMotionJPEGstreamusesconsiderableamountsofbandwidth,butprovidesexcellentimagequalityandaccesstoeveryimage containedinthestream.TherecommendedmethodofaccessingMotionJPEGlivevideofromtheAxisproductistousetheAXIS MediaControlinInternetExplorerinWindows.

AXISMediaControl(AMC)

AXISMediaControl(AMC)inInternetExplorerinWindowsistherecommendedmethodofaccessinglivevideofromtheAxisproduct.

Page 15

AXISM1065-LWNetworkCamera

MediaStreams

TheAMCControlPanelcanbeusedtocongurevariousvideoandaudiosettings.PleaseseetheAXISMediaControlUser’s Manualformoreinformation.

TheAMCControlPanelisautomaticallyinstalledonrstuse,afterwhichitcanbecongured.OpentheAMCControlPanelfrom:

•WindowsControlPanel(fromtheStartscreenorStartmenu)

•Alternatively,right-clickthevideoimageinInternetExplorerandclickSettings.

AlternativeMethodsofAccessingtheVideoStream

YoucanalsoaccessvideoandimagesfromtheAxisproductinthefollowingways:

•MotionJPEGserverpush(ifsupportedbytheclient,ChromeorFirefox,forexample).ThisoptionmaintainsanopenHTTP

connectiontothebrowserandsendsdataasandwhenrequired,foraslongasrequired.

•StillJPEGimagesinabrowser.Enterthepathhttp://<ip>/axis-cgi/jpg/image.cgi

•WindowsMediaPlayer.ThisrequiresAXISMediaControlandtheH.264decodertobeinstalled.Thefollowingpaths

canbeused:

-UnicastviaRTP:axrtpu://<ip>/axis-media/media.amp

-UnicastviaRTSP:axrtsp://<ip>/axis-media/media.amp

-UnicastviaRTSP,tunneledviaHTTP:axrtsphttp://<ip>/axis-media/media.amp

-Multicast:axrtpm://<ip>/axis-media/media.amp

•QuickTime

.Thefollowingpathscanbeused:

-rtsp://<ip>/axis-media/media.amp

-rtsp://<ip>/axis-media/media.3gp

Page 16

AXISM1065-LWNetworkCamera

MediaStreams

Note

•<ip>=IPaddress

•TheAxisproductsupportsQuickTime6.5.1andlater.

•QuickTimemayaddlatencytothevideostream.

•ItmaybepossibletouseotherplayerstoviewtheH.264streamusingthepathsabove,althoughAxisdoesnotguarantee this.

AccessAudioStreams

TheLiveViewpageprovidesaccesstoaudiothroughAXISMediaControl;inadditionaudiocanbeaccessedinthefollowingways:

•VAPIX®ApplicationProgrammingInterface(API)Formoreinformation,visitwww.axis.com/developer

•WindowsMediaPlayersupportssimplexaudio.Thefollowingpathscanbeused:

-UnicastviaRTP:axrtpu://<ip>/axis-media/media.amp

-UnicastviaRTSP:axrtsp://<ip>/axis-media/media.amp

-UnicastviaRTSP,tunneledviaHTTP:axrtsphttp://<ip>/axis-media/media.amp

-Multicast:axrtpm://<ip>/axis-media/media.amp

•QuickTime

supportsG.7 11andAACaudioencoding.Thefollowingpathscanbeused:

-rtsp://<ip>/axis-media/media.amp

-rtsp://<ip>/axis-media/media.3gp

Page 17

AXISM1065-LWNetworkCamera

SetUptheProduct

TheAxisproductcanbeconguredbyuserswithadministratororoperatorrights.Toopentheproduct’sSetuppages,clickSetupin thetopright-handcorneroftheLiveViewpage.

•Administratorshaveunrestrictedaccesstoallsettings.

•Operatorshaverestrictedaccesstosettings,seeUsersonpage50

Seealsotheonlinehelp

BasicSetup

BasicSetupprovidesshortcutstothesettingsthatshouldbemadebeforeusingtheAxisproduct:

1.Users.Seepage50.

2.Wireless.Seepage57.

3.TCP/IP.Seepage53.

4.Date&Time.Seepage52.

5.VideoStream.Seepage18.

6.AudioSettings.Seepage25.

TheBasicSetupmenucanbedisabledfromSystemOptions>Security>Users.

Howtochangethecamerafocus

Focuslockring

Focusring

1.Turnthefocuslockringcounterclockwisetounlockthefocusring.

2.Turnthefocusringtoadjustthefocus.

3.Turnthefocuslockringclockwisetolockthepositionofthefocusring.

Page 18

AXISM1065-LWNetworkCamera

VideoandAudio

Thevideoandaudiosettingscanbeusedtooptimizevideoandaudioquality.Youcancongurethefollowing:

•Videostreamsettings.Seepage18.

•Streamproles.Seepage20.

•Camerasettings.Seepage21.

•Viewarea.Seepage23.

•Overlayimage.Seepage23.

•Privacymask.Seepage25.

•Audiosettings.Seepage25.

•Audioclips.Seepage26.

SetUpVideoStreams

Tosetuptheproduct’svideostreams,gotoVideo&Audio>VideoStream.

Thevideostreamsettingsaredividedintothefollowingtabs:

•Image.Seepage18.

•Audio.Seepage25.

•H.264.Seepage19.

•Zipstream.Seepage20

•MJPEG.Seepage20.

PixelCounter

Thepixelcountershowsthenumberofpixelsinanareaoftheimage.Thepixelcounterisusefulinsituationswherethereis aspecicsizerequirement,forexampleinfacerecognition.

Thepixelcountercanbeused:

•Whensettingupavideostream,seeSetUpVideoStreamsonpage18.UnderPreview,clickOpenandselecttheShow

pixelcounteroptiontoenabletherectangleintheimage.Usethemousetomoveandresizetherectangle,orenterthe numberofpixelsintheWidthandHeighteldsandclickApply.

•WhenaccessingtheLiveViewpageinInternetExplorerwithAXISMediaControl(AMC)inWindows.Right-clickinthe

imageandselectPixelcounter.Usethemousetomoveandresizetherectangle.

Image

ThedefaultimagesettingscanbeconguredunderVideo&Audio>VideoStream.SelecttheImagetab.

Thefollowingsettingsareavailable:

•Resolution.Selectthedefaultresolution.

•Compression.Thecompressionlevelaffectstheimagequality,bandwidthandlesizeofsavedimages;thelowerthe

compression,thehighertheimagequalitywithhigherbandwidthrequirementsandlargerlesizes.

•Mirrorimage.Ifrequired,theimagecanbemirrored.

Page 19

AXISM1065-LWNetworkCamera

VideoandAudio

•Rotateimage.Ifrequired,theimagecanberotated.

•Colorsetting.SelecteitherColororBlack&White.Black&WhiteuseslessbandwidththanColor.

•Maximumframerate.Toavoidbandwidthproblems,theframerateallowedtoeachviewercanbeLimitedtoaxed

amount.Alternatively,theframeratecanbesetasUnlimited,whichmeanstheAxisproductalwaysdeliversthehighest frameratepossibleunderthecurrentconditions.

•Overlaysettings.SeeAboutoverlaytextonpage23.

ClickSavetoapplythenewsettings.

AboutH.264

H.264,alsoknownasMPEG-4Part10/AVC,isavideocompressionstandardthatprovideshighqualityvideostreamsatlowbitrates. AnH.264videostreamconsistsofdifferenttypesofframessuchasI-framesandP-frames.AnI-frameisacompleteimage,whereas P-framesonlycontainthedifferencesfrompreviousframes.

AboutGOPlength

AGroupofPictures(GOP)containsoneI-framefollowedbyanumberofP-frames.TheGOPlengthisthenumberofframes betweentwoI-frames.

IfyousettheGOPlengthandtheframerateequallyyouwillgetoneGOPpersecond.IfyouchangetheGOPlengthtoahigher valueyouwillgetmoresmallsizedP-framesandlessbigsizedI-frameswhilekeepingthesameframerate.Inotherwords,ahigh GOP-lengthvaluesavesbandwidth,butthevideoqualitymaydecrease.AlowGOP-lengthvalueincreasesthevideoquality butneedsmorebandwidth.

AboutH.264proles

TheAxisproductsupportsthefollowingH.264prole(s):

•Baseline:UsetheBaselineproleiftheclientdoesnotsupportCABACentropycoding.

•Main:TheMainproleusesCABACandprovidesabettercompressionwithmaintainedvideoquality.Itrequiresalarger

amountofprocessingpowertodecodethantheBaselineprole.

•High:TheHighproleprovidesahighercompressionthanbothMainandBaselineproles,butrequiresmoreprocessing

powertodecode.Highprolesupports8x8blocks,whichreducesthebitratefurthercomparedtotheMainprole.

Aboutbitratecontrol

Bitratecontrolisusefultomakesurethevideostreamingdoesnottakeuptoomuchbandwidth.

Thebuilt-inbitratecontrolcanbecombinedwithZipstream,seeAboutZipstreamonpage20.Werecommendusingahighbitrate limittoenablethefullpotentialofZipstream.

Aboutvariablebitrate

Variablebitrate(VBR)adjuststhebitrateaccordingtotheimagecomplexity.Whentheactivityinthesceneincreases,VBRadjusts thebitrateaccordingtothecomplexity,usingupmorebandwidthforincreasedactivityinthescene,andlessforlowersceneactivity. Variablebitrateissuitableifthereisasurplusinbandwidth,wheretheincreasedbitratemaynotbeanissue.

Aboutmaximumbitrate

Ifyouhavelimitedbandwidth,werecommendMaximumbitrate(MBR).MBRallowsyoutosetatargetbitratetocontrolthe bandwidthconsumption.Thetargetvaluelimitsthebitrate,butitmaintainsaexibilitytobeabletoprioritizeacontinuousvideo stream.Consequently,theframeratemightneedtogodownandtheimagequalitymightdecrease.Topartlycompensateforthis, youcanselectwhichvariableshallbeprioritized.Notsettingaprioritymeansthatframerateandimagequalityareequallyaffected.

Page 20

AXISM1065-LWNetworkCamera

VideoandAudio

HowtosetanH.264prole

1.TochangethesettingsforallH.264streamsthatdonotuseastreamprole,gotoVideo&Audio>VideoStream>H.264.

2.ToincreaseordecreasethenumberofframesperGOP,settheGOPlength.

3.SelectoneoftheH.264proles.

4.Selectonofthefollowing:

-Variablebitrate

-Maximumbitrate

5.IfyouselectMaximumbitrate,selectwhichvariabletoprioritizeinthePrioritydrop-downlist.

6.ClickSave.

AboutZipstream

Axis’ZipstreamTechnologyisabitratereductiontechnologyoptimizedforvideosurveillance.Zipstreamreducestheaveragebitrate intheH.264streambyremovingunnecessarydataandmakesitpossibletoallowhigherresolutions,reducestoragecostor tokeeprecordingsforalongertime.

Toreducethebitrate,Zipstreamreducesthenumberofbitsintheareasoftheimagethatarelessinterestingfromavideo surveillanceperspective,forexamplethebackground.Imagedetailsthatareimportantforforensicvideoanalysis,forexamplefaces andlicenseplates,arepreservedwithenoughnumberofbits.

Axis’ZipstreamTechnologyforH.264conformstotheH.264standardandiscompatiblewiththird-partyclientsandVMSsolutions thatdecodeH.264video.

MJPEG

Sometimestheimagesizeislargeduetolowlightorcomplexscenery.Adjustingthemaximumframesizehelpstocontrolthe bandwidthandstorageusedbytheMotionJPEGvideostreaminthesesituations.SettingtheframesizetotheDefaultsetting providesconsistentlygoodimagequalityattheexpenseofincreasedbandwidthandstorageusageinlowlight.Limitingtheframe sizeoptimizesbandwidthandstorageusage,butmaygivepoorimagequality.Topreventincreasedbandwidthandstorageusage, themaximumframesizeshouldbesettoanoptimalvalue.

Aboutstreamproles

Astreamproleisasetofpredenedstreamsettingsincludingresolution,compression,framerateandoverlaysettings.Stream prolescanbeused:

•Whensettinguprecordingusingactionrules.SeeEventsonpage42.

•Whensettingupcontinuousrecording.SeeContinuousRecordingonpage48.

•IntheLiveViewpage–selectthestreamprolefromtheStreamproledrop-downlist.

Tocreateanewproleormodifyanexistingprole,gotoSetup>Video&Audio>StreamProles.

ToselectadefaultstreamprolefortheLiveViewpage,gotoSetup>LiveViewCong.

AboutONVIFmediaproles

AnONVIFmediaproleconsistsofasetofcongurationsthatcanbeusedtochangemediastreamsettings.ONVIFmediaproles canbeusedbyaclienttoconguremediastreamproperties.

TheONVIFMediaProlespagelistsallpreconguredproles.Theseprolesareincludedintheproductforquicksetup.Youcan add,modifyorremoveONVIFmediaprolesfromthispage.

Page 21

AXISM1065-LWNetworkCamera

VideoandAudio

CameraSettings

TheVideo&Audio>CameraSettingspageprovidesaccesstoadvancedimagesettingsfortheAxisproduct.

ImageAppearance

TochangeImageAppearancegotothemenusunderSetup>Video&Audio>CameraSettings.

IncreasingtheColorlevelincreasesthecolorsaturation.Thevalue100givesmaximumcolorsaturationandthevalue0gives minimumcolorsaturation.

TheimageBrightnesscanbeadjustedintherange0–100,whereahighervalueproducesabrighterimage.

IncreasingtheSharpnesscanincreasebandwidthusage.Asharperimagemightincreaseimagenoiseespeciallyinlowlight conditions.Alowersettingreducesimagenoise,butthewholeimagewillappearlesssharp.

TheContrastchangestherelativedifferencebetweenlightanddark.Itcanbeadjustedusingtheslidebar.

WhiteBalance

TochangethissettinggotoSetup>Video&Audio>CameraSettings

Whitebalanceisusedtomakecolorsintheimageappearthesameregardlessofthecolortemperatureofthelightsource.TheAxis productcanbesettoautomaticallyidentifythelightsourceandcompensateforitscolor.Alternatively,selectthetypeoflight

sourcefromthedrop-downlist.Foradescriptionofeachavailablesetting,seetheonlinehelp.

ThewhitebalancewindowisenabledfortheAutomaticandAutomaticoutdooroptionsthatappearintheWhitebalancedrop-down list.Selectoneoftheoptionsfromthedrop-downlisttosetthewhitebalancewindowproperties.SelectAutomatictousethe defaultsettingsfortheAutomaticandAutomaticoutdooroptions(intheWhitebalancedrop-downlist).SelectCustomtomanually setareferencewindowforwhitebalanceintheviewarea.

WideDynamicRange

WideDynamicRangecanimprovetheexposurewhenthereisaconsiderablecontrastbetweenlightanddarkareasintheimage. EnableWDRinintensebacklightconditions.DisableWDRinlowlightconditionsforoptimalexposure.

ExposureSettings

Exposureistheamountoflightthecamera’ssensorcapturesforascene.Toomuchlightresultsinawashedoutimageandtoo littlelightresultsinadarkimage.

Conguretheexposuresettingstosuittheimagequalityrequirementsinrelationtolighting,framerateandbandwidth considerations.

Exposurevalue-Clickinthebartone-tunetheexposure.

Exposurecontrol-Selectasuitableoptiontocontrolexposure.

Formostscenes,theAutomaticoptionwillprovidethebestresults.Theshutterspeedisautomaticallysettoproduceoptimum imagequality. Fluorescentlampsorotherlightsourcescansometimescauseickeringintheimage.Toreduceickerintheimage,selecttheFlicker optionthatmatchesthepowerlinefrequency. TheHoldcurrentoptionlocksthecurrentexposuresettings.

Shutter&Gain

Theshutterandgainsettingsaffecttheamountofmotionblurandnoiseintheimage.Toadapttodifferentlighting,available storagespaceandbandwidth,itisoftennecessarytoprioritizeeitherlowmotionblurorlownoise.TheAxisproductallowsdifferent prioritizationinnormallightandinlowlight.

Page 22

AXISM1065-LWNetworkCamera

VideoandAudio

Shutterspeedisrelatedtotheamountoftimetheshutterisopenedandismeasuredinseconds(s).Aslowshutterspeedallows morelighttoreachthesensorandcanhelpproduceabrighterimageinlowlightsituations.Ontheotherhand,aslowshutter speedcancausemovingobjectstoappearblurry.

SetWideDynamicRangetoWDROffandsetShutterto

•Autotosettheshutterspeedautomatically.Ifrequired,useMaxshuttertolimittheshutterspeedtopreventtheframe

ratefrombeingreduced.

Forexample,toget30fps,setMaxshutterto1/30.

•Fixedtouseaxedshutterspeed.

Gain,measuredindecibel(dB),istheamountofamplicationappliedtotheimage.Ahighgainmayprovideabetterimageinlow lightsituationsbutwillincreasetheamountofimagenoise.

SetGainto

•Autotosetthegainautomatically.Ifrequired,useMaxgaintolimittheappliedgain.

•Fixedtouseaxedgain.

Example Ifstoragespaceorbandwidthislimited,tryusingalowergain.Thiswillreduceimagenoiseandproducesmallerimageles.

Theshutterandgainsettingsaffecttheamountofmotionblurandnoiseintheimage.Toadapttodifferentlighting,available storagespaceandbandwidth,itisoftennecessarytoprioritizeeitherlowmotionblurorlownoise.TheAxisproductallows usingdifferentprioritizationinnormallightandinlowlight.

SetExposurepriorityto

•Automatictosettheshutterspeedautomatically.

•Lowmotionblurtoprioritizelowmotionblur.

•Lownoisetoprioritizelownoise.

ItisalsopossibletosettheMinandMaxlimitsforShutterandGain.

Shutterisrelatedtotheamountoftimetheshutterisopenedandismeasuredinseconds(s).Aslowshutterspeedallowsmorelight toreachthesensorandcanhelpproduceabrighterimageinlowlightsituations.Ontheotherhand,aslowshutterspeedcan causemovingobjectstoappearblurry.

Gain,measuredindecibel(dB),istheamountofamplicationappliedtotheimage.Ahighgainmayprovideabetterimageinlow lightsituationsbutwillincreasetheamountofimagenoise.

Example Ifstoragespaceorbandwidthislimited,tryusingalowergain.Thiswillreduceimagenoiseandproducesmallerimageles.

Day/Night

TheIRcutlterpreventsinfrared(IR)lightfromreachingtheimagesensor.Inpoorlightingconditions,forexampleatnight,orwhen usinganexternalIRlamp,settheIRcutltertoOff.Thisincreaseslightsensitivityandallowstheproductto“see”infraredlight.The imageisshowninblackandwhitewhentheIRcutlterisoff.

IfusingautomaticExposurecontrol,settheIRcutltertoAutotoautomaticallyswitchbetweenOnandOffaccordingtothe lightingconditions.

Built-inIRIllumination

WARNING

Riskofeyeinjury.DonotlookdirectlyintotheIRLEDatshortdistance.SincethelightprovidedfromtheIRLEDisoutsideof thevisiblerange,itisnotpossibletoseeifitisactive.UsethecameratocheckiftheIRilluminationisactive.

Page 23

AXISM1065-LWNetworkCamera

VideoandAudio

TheIRilluminationcanbeactivatedorde-activated,anditsintensitycanbeincreasedordecreasedbymovingtheslider,from theproduct’sLiveViewpage.

OthersettingscanbedenedfromSetup>Video&Audio>CameraSettings.

De-selecttheEnableIRilluminationoptiontodisableIRilluminationaltogether.IfyoudisabletheSynchronizeIRilluminationwith day/nightoption,IRilluminationwillnotbesynchronizedwithday/nightchanges.

ViewArea

Aviewareaisacroppedpartofthefullview.TheviewareaistreatedasavideosourceinLiveViewandhasitsownvideo streamandPTZsettings.

Whensettingupaviewareaitisrecommendedthatthevideostreamresolutionisthesamesizeasorsmallerthantheviewarea size.Settingthevideostreamresolutionlargerthantheviewareasizeimpliesdigitallyscaledupvideoaftersensorcapture, requiringmorebandwidthwithoutaddingimageinformation.

Toenable,gotoVideo&Audio>CameraSettingsandselectEnableViewArea.

Toconguretheviewarea:

1.GotoVideo&Audio>ViewArea.

2.SelectanAspectratioandaVideostreamresolution.

3.Usethemousetomoveandresizetheviewarea.

4.SelectEnablePTZtoenabledigitalPTZfortheviewarea.

5.ClickSavetosavethesettings.

Note

ThePTZfunctionalityisusefulduringinstallationoftheAxisproduct.Useaviewareatocropoutaspecicpartofthe fullview.

Aboutoverlays

Overlaysaresuperimposedoverthevideostream.Theyareusedtoprovideextrainformationduringrecordings,suchasatimestamp, orduringproductinstallationandconguration.

Aboutoverlaytext

Anoverlaytextcanincludethecurrentdateandtime,oratextstring.Whenusingatextstring,so-calledmodierscanbeusedto display,forexample,thecurrentbitrateorthecurrentframerate.

Youcanchoosebetweenthefollowingtextoverlaysizes:

Size

Small

Medium16pixels28pixels

Large21pixels36pixels

TextheightBackgroundheight

10pixels20pixels

Itisalsopossibletodisplaytextwhenanactionruleistriggered,seeHowtoincludeoverlaytextinanactionruleonpage24.

Howtoincludeoverlaytext

1.GotoVideo&Audio>VideoStreamandselecttheImagetab.

Page 24

AXISM1065-LWNetworkCamera

VideoandAudio

2.Toincludedateandtime,selectIncludedateandIncludetime.

3.Toincludeatextstring,selectIncludetextandenterthetextintheeld.Modierscanbeused,seeFileNaming&

Date/TimeFormatsintheonlinehelp

4.Selectsize,color,andplacementofthetextstring.

5.ClickSave.

Tomodifythedateandtimeformat,gotoSystemOptions>Date&Time.SeeDate&Timeonpage52.

Howtoincludeoverlaytextinanactionrule

1.GotoVideo&Audio>VideoStreamandselecttheImagetab.

2.UnderOverlaySettings,selectIncludetext.

3.Enterthemodier#D.Whentheruleistriggered,#Disreplacedbythetextspeciedintheactionrule.

Additionaltextinthiseldwillbedisplayedalsowhentheactionruleisnotactive.

4.GotoEvents>ActionRulesandcreateyouractionrule.

5.FromtheActionslist,selectOverlayText.

6.EnterthetexttodisplayintheTexteld.

7.SpecifytheDuration.Thetextcanbedisplayedwhiletheruleisactiveorforaxednumberofseconds.

Aboutoverlayimages

Anoverlayimageisastaticimagesuperimposedoverthevideostream.Theimage,forexampleacompanylogo,isrstuploadedto theAxisproductandthenusedtoprovideextrainformationortomaskapartoftheimage.

Imagespecications:

•TheuploadedimageshouldbeaWindows24-bitBMPimagewithmaximum250colors.

•Theimagewidthandheight,inpixels,mustbeexactlydivisiblebyfour.

•Theimagecannotbelargerthanthemaximumimageresolution.

•Ifyoucombineatextoverlaywithandimageoverlay,thetextoverlayalwaystakespresidenceovertheoverlayimagein

height.Atextoverlayalwaysstretchesacrossthewholevideoimagewhichmeansyoucannotshrinktheoverlaystripto makeroomforanimage.Forinformationaboutthedifferenttextoverlayheights,seeAboutoverlaytext.

Sinceitisstatic,thepositionandsizeofanoverlayimageremainsthesameregardlessofresolutionandpan,tiltorzoommovements.

Toalwayscoveraselectedpartofthemonitoredarea,useaprivacymask.SeeAboutprivacymasksonpage25.

Howtouploadanoverlayimage

1.GotoVideo&Audio>OverlayImage.

2.ClickBrowseandbrowsetothele.

3.ClickUpload.

4.TheTransparencySettingspageisnowdisplayed:

-Tomakeacolorintheoverlayimagetransparent,selectUsetransparencyandentertheRGBhexadecimalvalue forthecolor.Example:Tomakewhitetransparent,enterFFFFFF.

Page 25

AXISM1065-LWNetworkCamera

VideoandAudio

Formoreexamplesofhexadecimalvalues,seetheonlinehelp.

-Toscaletheimageautomatically,selectScalewithresolution.Theimagewillbescaleddowntotthe resolutionusedbytheAxisproduct.

5.ClickSave.

Howtoincludeanoverlayimage

1.GotoVideo&Audio>OverlayImage.

2.SelecttheimagetousefromtheUseoverlayimagelistandclickSave.

3.GotoVideo&Audio>VideoStreamandselecttheImagetab.

4.UnderOverlaySettings,selectIncludeoverlayimageatthecoordinates.

5.Tocontroltheimage’sposition,entertheX(horizontal)andY(vertical)coordinates.TheX=0andY=0positionis thetopleftcorner.Ifapartoftheimageispositionedoutsidethevideoimage,theoverlayimagewillbemovedso thatthewholeimageisvisible.

6.ClickSave.

Aboutprivacymasks

Aprivacymaskisauser-denedareathatcoverspartsofthemonitoredarea.Privacymasksappearasblocksofsolidcolorandare appliedonthevideostream.PrivacymaskscannotbebypassedusingtheVAPIX®applicationprogramminginterface(API).

ThePrivacyMaskList(Video&Audio>PrivacyMask)showsallthemasksthatarecurrentlyconguredintheAxisproductand indicatesiftheyareenabled.

Youcanaddanewmask,re-sizethemaskwiththemouse,chooseacolorforthemask,andgivethemaskaname.

Formoreinformation,seetheonlinehelp

Important

Addingmanyprivacymasksmayaffecttheproduct’sperformance.

SetUpAudio

Tochangetheproduct’saudiosettings,gotoVideo&Audio>AudioSettings.

Eachstreamproleisaseparatevideostream.Toincludetheaudiostreaminallstreamproles,gototheaudiotabineachstream prolesettingspageandenableaudio.Formoreinformation,seeAboutstreamprolesonpage20.

AudioModes

TheAxisproductsupportsthefollowingaudiomodes:

•Half-duplex–AudiocanbetransmittedtoandfromtheAxisproductbutonlyinonedirectionatatime.Totransmit audiousingtheLiveViewpage,usetheTalkandListenbuttons,seeAMCAudioControlsonpage12.

•Simplex–NetworkCameraspeakeronly-AudioistransmittedfromaclienttotheAxisproductandcanbeplayedby aspeakerconnectedtotheproduct.TotransmitaudiousingtheLiveViewpage,theTalkandMicrophoneonbuttons mustbothbeactive,seeAMCAudioControlsonpage12.

•Simplex–NetworkCameramicrophoneonly-Audiocapturedbytheproductmicrophoneistransmittedfromthe Axisproducttooneormoreclients.

Tosettheaudiomode,gotoVideo&Audio>AudioSettingsandselectthedesiredmodefromtheAudiomodedrop-downlist.

Page 26

AXISM1065-LWNetworkCamera

VideoandAudio

AudioInput

ConguretheaudioinputsettingsunderAudio>AudioSettings.

Sourceliststhebuilt-inmicrophone.

UsetheInputgaintocontrolthevolume(dBFullScale)oftheaudioinput.Ifthesoundistoolow,chooseahigherdB,toamplify thesound.Ifthesoundistoohigh,choosealowerdB.TheLevelbargivesavisualrepresentationoftheaudiosignallevelindB relativetothefull-scaleinputlevel.

•Green–thesignalisatagoodlevel.

•Yellow–thesignalisbecomingdistorted.

•Red–thesignalisdistorted.

UsetheEncodingoptiontoselectdigitalaudioencodingformat.

•AACisusedforencodingonlyintheAxisproduct.Fordecoding,nolicenseisincludedintheAxisproduct.

•G71 1isanunlicensedstandardcodecthatisusefulwhenintegratingaudiointoaVoIPsystem

•G726isanunlicensedspeechcodecthatismostcommonlyusedwithinthesecurityindustry.

TheSampleratedenesthenumberoftimespersecondthesoundissampled.Ahighersampleratewillprovidebetteraudio quality,butalsorequiresagreaterbandwidth.

SettherequiredBitratedependingontheselectedencoding.Ahigherbitratewillgivebetteraudioquality.Alowerbitrate mayhavelatencyordelay,butwillrequirelessbandwidth.

Formoreinformationaboutthesesettings,pleaseseetheonlinehelp.

AudioOutput

ConguretheaudiooutputsettingsunderVideo&Audio>AudioSettings.

Outputgain-Controlthevolumeofthelineaudiooutput.Ifthesoundistoolow,chooseahigherdBvalue.Ifthesoundis

toohigh,choosealowerdBvalue.

AudioClips

AnaudioclipisasoundlethatcanbeplayedwheneventsoccurordirectlyfromtheLiveViewpage.Theaudioclipmustrstbe uploadedtotheAxisproductorrecordedbyamicrophoneconnectedtotheproduct.

Toadd,download,modifyorremoveaudioclips,gotoVideo&Audio>AudioClips.Formoreinformationseetheonlinehelp

ToconguretheAxisproducttoplayaudioclipswhenaneventoccurs,anactionrulemustbesetup.Formoreinformation, seeEventsonpage42.

Note

Audioclipscannotbeusediftheproduct’saudiofunctionalityisenabled.TheaudiofunctionalityisenabledontheAudio tabunderVideo&Audio>VideoStream.

Page 27

AXISM1065-LWNetworkCamera

ConﬁguretheLiveViewPage

YoucancustomizetheLiveViewpageandalterittosuityourrequirements.Itispossibletodenethefollowingfeaturesof theLiveViewpage.

•StreamProle.Seepage20.

•DefaultViewerforBrowser.Seepage27.

•ViewerSettings.Seepage27.

•ActionButtons.ThesearethebuttonsdescribedinControlsontheLiveViewPageonpage11.

•UserDenedLinks.Seepage28.

DefaultViewerforBrowsers

FromLiveViewCong>DefaultViewerselectthedefaultmethodforviewingvideoimagesinyourbrowser.Theproductattempts toshowthevideoimagesintheselectedvideoformatandviewer.Ifthisisnotpossible,theproductoverridesthesettingsand selectsthebestavailablecombination.

BrowserViewerDescription

WindowsInternetExplorer

Otherbrowsers

Formoreinformation,pleaseseetheonlinehelp.

AMC

QuickTime

StillimageDisplaysstillimagesonly.ClicktheRefreshbuttoninyourbrowsertoviewa

ServerPush

QuickTime

StillimageDisplaysstillimagesonly.ClicktheRefreshbuttoninyourbrowsertoviewa

RecommendedviewerinInternetExplorer(H.264/MotionJPEG).

H.264.

newimage.

Recommendedviewerforotherbrowsers(MotionJPEG).

H.264.

newimage.

ViewerSettings

Tocongureoptionsfortheviewer,gotoLiveViewCong>ViewerSettings.

•SelectShowviewertoolbartodisplaytheAXISMediaControl(AMC)ortheQuickTimeviewertoolbarunderthevideo imageinyourbrowser.

•H.264decoderinstallation.TheadministratorcandisableinstallationoftheH.264decoderincludedwithAXISMedia Control.Thisisusedtopreventinstallationofunlicensedcopies.Furtherdecoderlicensescanbepurchasedfromyour Axisreseller.

•SelectShowcrosshairinPTZjoystickmodetoenableacrossthatwillindicatethecenteroftheimageinPTZjoystick mode.

•SelectUsePTZjoystickmodeasdefaulttoenablejoystickmode.Themodecanbechangedtemporarilyfromthe PTZcontrolpanel.

•SelectEnablerecordingbuttontoenablerecordingfromtheLiveViewpage.Thisbuttonisavailablewhenusingthe AMCviewer.TherecordingsaresavedtothelocationspeciedintheAMCControlPanel.SeeAXISMediaControl (AMC)onpage14.

Page 28

AXISM1065-LWNetworkCamera

ConﬁguretheLiveViewPage

UserDenedLinks

Todisplayuser-denedlinksintheLiveViewpage,selecttheShowcustomlinkoption,givethelinkanameandthenentertheURL tolinkto.Whendeningaweblinkdonotremovethe'http://'fromtheURLaddress.Customlinkscanbeusedtorunscriptsor activateexternaldevicesconnectedtotheproduct,ortheycanlinktoawebpage.Customlinksdenedascgilinkswillrunthe scriptinthebackground,inahiddenframe.Deningthelinkasaweblinkwillopenthelinkinanewwindow.

Page 29

AXISM1065-LWNetworkCamera

PTZ(PanTiltZoom)

PTZ(pan,tiltandzoom)isavailableifyouhaveenableddigitalPTZintheselectedviewarea.Formoreinformationonviewareas, seeViewAreaonpage23.

Aboutpresetpositions

Apresetpositionisasavedviewthatcanbeusedtoquicklysteerthecameratoaspecicposition.Apresetpositionconsistsof thefollowingvalues:

•Panandtiltpositions

•Zoomposition

Howtoaccessthepresetpositions

Presetpositionscanbeaccessedinseveralways:

•ByselectingthepresetfromtheSourcedrop-downlistintheLiveViewPage.

•Whensettingupactionrules.Seepage42.

•Whensettingupguardtours.Seepage29.

Howtoaddapresetposition

1.GotoSetup>PTZ>PresetPositions.

2.Clickintheimageorusethecontrolstosteerthecameraviewtothedesiredposition.

3.WriteanameintheCurrentpositioneld.

4.ClickAddtosavethepresetposition.

SettheHomePosition

TheentireviewareaistreatedastheHomepositionwhichisreadilyaccessiblebyclickingtheHomebuttonontheLiveView pageandinthePresetPositionssetupwindow.

TheproductcanbeconguredtoreturntotheHomepositionwhenthePTZfunctionalityhasbeeninactiveforaspeciedlengthof time.EnterthelengthoftimeintheReturntohomeaftereldandclickSave.Setthetimetozerotopreventtheproductfrom automaticallyreturningtotheHomeposition.

Aboutguardtours

Aguardtourdisplaysthevideostreamfromdifferentpresetpositions,one-by-one,inapredeterminedorderoratrandomandfor congurabletimeperiods.Theenabledguardtourwillkeeprunningaftertheuserhasloggedofforclosedthebrowser.

Note

Forproductsthatsupportlimitedguardtours,thereisaxedminimumviewtimeof10seconds.

Advanced

Controls

AdvancedPTZsettingscanbeconguredunderPTZ>Advanced>Controls.

Page 30

AXISM1065-LWNetworkCamera

PTZ(PanTiltZoom)

ThePanelShortcutCommandButtonslistshowstheuser-denedbuttonsthatcanbeaccessedfromtheLiveViewpage’sCtrl panel.ThesebuttonscanbeusedtoprovidedirectaccesstocommandsissuedusingtheVAPIX®applicationprogramminginterface.

ClickAddtoaddanewshortcutcommandbutton.

ThefollowingPTZcontrolsareenabledbydefault:

•Pancontrol

•Tiltcontrol

•Zoomcontrol

Todisablespeciccontrols,deselecttheoptionsunderEnable/Disablecontrols.

Note

DisablingPTZcontrolswillnotaffectpresetpositions.Forexample,ifthetiltcontrolisdisabled,theproductcanstillmoveto presetpositionsthatrequireatiltmovement.

Page 31

AXISM1065-LWNetworkCamera

Detectors

Aboutcameratampering

CameraTamperingcangenerateanalarmwhenthecameraisrepositioned,orwhenthelensiscovered,spray-paintedorseverely de-focused.Tosendanalarm,forexampleviaemail,anactionrulemustbesetup.

Howtoconguretamperingdetection

1.GotoDetectors>CameraTampering.

2.SettheMinimumduration,thatisthetimethatmustelapsebeforeanalarmisgenerated.Increasetimetoprevent falsealarmsforknownconditionsthataffecttheimage.

3.SelectAlarmfordarkimagesifanalarmshouldbegeneratedwhenlightsaredimmedorturnedoff,orifthelensis sprayed,covered,orrenderedseverelyoutoffocus.

4.ClickSave.

Howtocongureanactionrulefortamperingalarm

1.GotoEvents>ActionRules.

2.ClickAddtosetupanewactionrule.

3.EnteraNamefortheactionrule.

4.UnderCondition,selectDetectorsfromtheTriggerlist.

5.SelectTamperingfromthelistofdetectors.

6.Optionally,selectascheduleandsetadditionalconditions.

7.Selecttheaction.Example:Tosendanemail,selectSendNoticationandselectaRecipientfromthelistofdened recipients.

Note

TheWhiletheruleisactiveoptionunderDurationcannotbeusedwithcameratampering,sincecameratamperingdoesnot haveadurationandonceithasbeentriggereditwillnotautomaticallyreturntoitsuntriggeredstate.

Formoreinformationonactionsrules,seeEventsonpage42.

MotionDetection

Motiondetectionisusedtogenerateanalarmwhenevermovementstartsorstopsinthecameraview.

Motiondetectionisconguredbydeningupto10IncludeandExcludewindows:

•Includewindows—deneareaswheremotionshouldbedetected

•Excludewindows—deneareaswithinanIncludewindowthatshouldbeignored(areasoutsideIncludewindows areautomaticallyignored).

Forinstructions,seeSetUpMotionDetectionWindowsonpage32.

Tocontrolthenumberofmotiondetectionalarms,theparametersObjectSize,HistoryandSensitivitycanbeadjusted.See MotionDetectionParametersonpage32.

Page 32

AXISM1065-LWNetworkCamera

Detectors

Oncemotiondetectionwindowsarecongured,theAxisproductcanbeconguredtoperformactionswhenmotionisdetected. Possibleactionsincludeuploadingimagesandstartrecording.Formoreinformation,seeSetUpActionRulesonpage42.

Note

•Usingthemotiondetectionfeaturemaydecreasetheproduct’soverallperformance.

•ThepositionoftheMotionDetectionWindowisrelativetotheorientationoftheCamera.Changingtheorientationofthe

camerawillalsochangethepositionoftheMotionDetectionWindow.

SetUpMotionDetectionWindows

TosetupamotiondetectionIncludeWindow,followtheseinstructions:

1.GotoDetectors>MotionDetection.

2.SelecttheCongureIncludedWindowsoptionandclickNew.Selectthenewwindowinthelistofwindowsand enteradescriptivename.

3.Adjustthesize(dragthebottomright-handcorner)andtheposition(clickonthetextatthetopanddragtothedesired position)ofthewindow.

4.AdjusttheObjectSize,HistoryandSensitivityprolesliders(seeMotionDetectionParametersfordetails).Anydetected motionwithinanactivewindowisindicatedbyredpeaksintheActivitywindow.

5.ClickSave.

Toexcludepartsoftheincludewindow,selecttheCongureExcludedWindowsandpositiontheexcludewindowwithinthe includewindow.

Todeleteanincludeorexcludewindow,selectthewindowinthelistofwindowsandclickDel.

MotionDetectionParameters

Theparameterscontrollingmotiondetectionaredescribedinthetablebelow:

Parameter

Description

Highlevel(100%)

Mediumlevel(50%)

Lowlevel(0%)

Recommendedvalues

Defaultvalues

ObjectSize

Objectsizerelativetowindow size.

Onlyverylargeobjectstrigger motiondetection.

Evenverysmallobjectstrigger motiondetection.

5–15%60–90%75–95%

15%90%90%

History

Objectmemorylength.

Anobjectthatappearsin thewindowtriggersmotion detectionforalongtime beforeitisconsideredas non-moving.

Anobjectthatappearsin thewindowtriggersmotion detectiononlyforaveryshort timebeforeitisconsideredas non-moving.

Sensitivity

Differenceinluminance betweenbackgroundand object.

Ordinarycoloredobjectson ordinarybackgroundstrigger motiondetection.

Alargedifferenceinluminance isrequiredtotriggermotion detection.

Onlyverybrightobjectson adarkbackgroundtrigger motiondetection.

Page 33

AXISM1065-LWNetworkCamera

Detectors

Note

•Totriggeronsmallobjectsormovements,useseveralsmallmotiondetectionwindowsratherthanonelargewindow,

andselectalowobjectsize.

•Toavoidtriggeringonsmallobjects,selectahighobjectsize.

•Whilemonitoringanareawheremovingobjectsarenotexpected,selectahighhistorylevel.Thiswillcausemotion

detectiontotriggeraslongastheobjectispresentinthewindow.

•Toonlydetectashinglight,selectalowsensitivity.Inothercaseshighsensitivityisrecommended.

AudioDetection

TheAxisproductcanbeconguredtogenerateanalarmwhenaudiorisesaboveorfallsbelowthethresholdvalue.Thethreshold valuecanbesetintherange0–100where0isthemostsensitiveand100theleastsensitive.

1.GotoDetectors>AudioDetection.

2.SettheaudioalarmlevelandclickSave.

3.GotoEvents>ActionRulesandsetupanactionrule,seeSetUpActionRulesonpage42.

DetectedaudioisindicatedbycoloredpeaksintheActivityindicator.Aneventistriggeredwhendetectedaudiorisesaboveorfalls belowthethresholdvalue,whichisrepresentedbythebar.

PIRSensor

ThePIR(PassiveInfrared)sensordetectsmotionbymeasuringchangesininfraredlight.Thesensorcanforexamplebeused inlow-lightenvironmentswherevideomotiondetectionisnotreliable.Whencongured,thecameracanautomaticallyswitch onthelightwhentriggeredbythePIRsensor.

ToadjustthesensitivityofthePIRsensor,anactionrulethatactivatesthebuilt-inlightwhenthePIRsensordetectsmotionisuseful:

1.GotoEvents>ActionRulesandclickAdd.

2.SelectDetectorsfromtheTriggerlistandthenselectPIR.

3.SelectActivateLightastheaction.

4.ClickOKtosavetherule.

5.GotoDetectors>PIRSensor.

6.MakesurethereismovementinfrontofthecameraandadjusttheSensitivityuntilthelightisactivated.

7.Whensatised,clickSave.

Bysettingupactionrules,theAxisproductcanbeconguredto,forexample,recordvideowhenthePIRsensordetectsmotion. Ifthecameraisusedinalow-lightenvironment,anactionrulethatturnsonthebuilt-inlightcanimproveimagequalityof therecordedvideo.

Formoreinformationonactionrules,seeEventsonpage42.

Page 34

AXISM1065-LWNetworkCamera

Applications

AXISCameraApplicationPlatform(ACAP)isanopenplatformthatenablesthirdpartiestodevelopanalyticsandotherapplications forAxisproducts.Forinformationaboutavailableapplications,downloads,trialsandlicenses,gotowww.axis.com/applications

Note

•Severalapplicationscanrunatthesametimebutsomeapplicationsmightnotbecompatiblewitheachother.Certain

combinationsofapplicationsmightrequiretoomuchprocessingpowerormemoryresourceswhenruninparallel.Verify thattheapplicationsworktogetherbeforedeployment.

ApplicationLicenses

Someapplicationsneedalicensetorun.Licensescanbeinstalledintwoways:

•Automaticinstallation—requiresaccesstotheInternet

•Manualinstallation—obtainthelicensekeyfromtheapplicationvendoranduploadthekeytotheAxisproduct

Torequestalicense,theAxisproductserialnumber(S/N)isrequired.Theserialnumbercanbefoundontheproductlabelandunder SystemOptions>Support>SystemOverview.

UploadApplication

Touploadandstartanapplication:

1.GotoSetup>Applications.

2.UnderUploadApplication,clickBrowse.LocatetheapplicationleandclickUploadPackage.

3.Installthelicense(ifapplicable).Forinstructions,seethedocumentationprovidedbytheapplicationvendor.

4.Starttheapplication.GotopageApplications,selecttheapplicationinthelistofinstalledapplicationsandclickStart.

5.Conguretheapplication.Forinstructions,seethedocumentationprovidedbytheapplicationvendor.

Note

•Applicationscanbeuploadedbyproductadministrators.

•ApplicationsandlicensescanbeinstalledonmultipleproductsatthesametimeusingAXISCameraManagement,version

3.10andlater.

Togeneratealoglefortheapplication,gotoApplications.SelecttheapplicationandclickLog.

ApplicationConsiderations

Ifanapplicationisupgraded,applicationsettings,includingthelicense,willberemoved.Thelicensemustbereinstalledand theapplicationrecongured.

IftheAxisproduct’srmwareisupgraded,uploadedapplicationsandtheirsettingswillremainunchanged,althoughthisisnot guaranteedbyAxisCommunications.Notethattheapplicationmustbesupportedbythenewrmware.Forinformationabout rmwareupgrades,seeUpgradetheFirmwareonpage67.

IftheAxisproductisrestarted,runningapplicationswillrestartautomatically.

IftheAxisproductisrestored,uploadedapplicationsremainunchangedbutmustberestarted.Tostarttheapplication,goto Setup>Applications.SelecttheapplicationinthelistofinstalledapplicationsandclickStart.Forinformationaboutrestoring theAxisproduct,seeMaintenanceonpage64.

Page 35

AXISM1065-LWNetworkCamera

Applications

IftheAxisproductisresettofactorydefault,uploadedapplicationsandtheirsettingsareremoved.Forinformationaboutfactory default,seeResettoFactoryDefaultSettingsonpage65.

Page 36

AXISM1065-LWNetworkCamera

AXISVideoMotionDetection

AXISVideoMotionDetectionisanapplicationthatdetectsmovingobjectsinthecamera’seldofview.Whenamovingobject isdetected,AXISVideoMotionDetectionsendsanalarmthatcanbeusedbytheAxisproductorbythird-partysoftwareto forexample,recordvideoorsendanotication.

AXISVideoMotionDetection3isincludedwiththeAxisproductandisavailableunderSetup>Applications.TouseAXISVideo MotionDetection,theapplicationmustrstbestarted.Toavoiddetectingunwantedobjects,theapplicationshouldbecongured. Duringconguration,visualconrmationcanbeusedtohelpunderstandtheeffectofthedifferentlters.Whenvisualconrmation isenabled,redpolygonsshowwhichobjectstheapplicationdetectsandgreenpolygonsshowwhichobjectstheapplicationignores.

Considerations

BeforeusingAXISVideoMotionDetection3,takethefollowingintoconsideration:

BeforeusingAXISDigitalAutotracking,takethefollowingintoconsideration:

•Smallanddistantobjectsmightnotbedetected.

•Smallanddistantobjectsmightnotbetracked.

•Detectionaccuracymaybeaffectedbyweatherconditionssuchasheavyrainorsnow.

•MakesurethatthelightingconditionsarewithintheAxisproduct’sspecication.Addadditionallightingifneeded.

•Makesurethatthecameraisnotsubjecttoexcessivevibrations.Vibrationsmightcausefalsedetections.

•Makesurethatthecameraisnotsubjecttoexcessivevibrations.Vibrationsmightcausefalsedetectionsandunwanted trackedobjects.

StartandStoptheApplication

Tostarttheapplication,selectitintheInstalledApplicationslistontheApplicationspageandclickStart.

Tostoptheapplication,selectitinthelistandclickStop.

CongureApplication

TheapplicationisavailablefromSetup>Applications>MotionDetection3.GotoSettingsandthenclickAXIS AXIS Detection

Detection Detection

TocongureAXISVideoMotionDetection3,followthesesteps:

TocongureAXISDigitalAutotracking,followthesesteps:

settings

settings settings

1.Modifythesizeandpositionoftheincludearea.Thisistheareainwhichmovingobjectswillbedetected.SeeInclude Areaonpage37.

2.Modifythesizeandpositionoftheincludearea.Thisistheareainwhichmovingobjectswillbetracked.SeeIncludeArea onpage37.

toopentheapplication’swebpage.

AXIS

Video

Motion

Video Video

Motion Motion

3.Optionally,addoneormoreexcludeareas.Objectsinanexcludeareawillbeignored.SeeExcludeAreaonpage37.

4.ClickSavetoapplythechanges.

5.Usevisualconrmationtoverifythesettings.SeeVisualConrmationonpage38.

6.Iftoomanyunwantedobjectsaredetected,enableandcongureoneormoreoftheignorelters.SeeIgnoreFilters onpage38.

Page 37

AXISM1065-LWNetworkCamera

AXISVideoMotionDetection

7.Iftoomanyunwantedobjectsaretracked,enableandcongureoneormoreoftheignorelters.SeeIgnoreFilters onpage38.

Aftermodifyingasetting,clickSavetoapplythechanges.Thevideostreamwillberestartedanditmaytakeafewseconds beforethechangeisapplied.

IncludeArea

Theincludeareaistheareainwhichmovingobjectswillbedetected.Objectsmovingoutsidetheincludeareawillbeignored. Theobjectwillbedetectedalsoifonlyapartoftheobjectisinsidetheincludearea.

Theincludeareaistheareainwhichmovingobjectswillbetracked.Objectsmovingoutsidetheincludeareawillbeignored.The objectwillbetrackedalsoifonlyapartoftheobjectisinsidetheincludearea.

Note

Tomodifytheincludearea,InternetExplorerandAXISMediaControl(AMC)mustbeused.

Thedefaultincludeareaisasquarethatcoversthewholeimage.Clickonthe

Usethemousetoreshapeandresizetheareasothatitonlycoversthepartoftheimageinwhichmovingobjectsshouldbedetected. Thedefaultsquarecanbechangedtoapolygonwithupto20points(corners).

•Toaddanewpoint,clickontheincludeareaborder.Dragthepointtothedesiredposition.

•Toremoveapoint,right-clickonthepoint.

•Tomoveapoint,dragthepointtothenewposition.

•Tomovetheentireincludearea,placethemousepointerinsidethearea.Whenthepointerbecomesacross,dragthe areatothenewposition.

•Toselecttheincludearea,clickontheborder.

Toresettheincludeareatoitsdefaultsize,clickReset.

icontohighlightthearea.

ExcludeArea

Anexcludeareaisanareainwhichmovingobjectswillbeignored.Useexcludeareasifthereareareasinsidetheincludearea thattriggeralotofunwanteddetectedobjects.Upto10excludeareascanbeused.

Anexcludeareaisanareainwhichmovingobjectswillbeignored.Useexcludeareasifthereareareasinsidetheincludearea thattriggeralotofunwantedtrackedobjects.Upto10excludeareascanbeused.

Note

Toaddandmodifyexcludeareas,InternetExplorerandAXISMediaControl(AMC)mustbeused.

Toaddanexcludearea,clickAdd.Thedefaultexcludeareaisarectangleplacedinthecenteroftheimage.Usethemouse tomove,reshapeandresizetheareasothatitcoversthedesiredpartoftheimage.Thedefaultsquarecanbechangedtoa polygonwithupto20points(corners).

•Tomovetheexcludearea,placethemousepointerinsidethearea.Whenthepointerbecomesacross,dragthearea tothenewposition.

•Toaddanewpoint,clickontheexcludeareaborder.Dragthepointtothedesiredposition.

•Toremoveapoint,right-clickonthepoint.

•Tomoveapoint,dragthepointtothenewposition.

•Toselectanexcludearea,clickontheborder.

Toremoveanexcludearea,selecttheareaandthenclickRemove.

Page 38

AXISM1065-LWNetworkCamera

AXISVideoMotionDetection

Tohighlighttheexcludeareas,clickontheicon.

VisualConrmation

Visualconrmationisusedtovalidatethatthesettingsarecorrect,thatis,thatallobjectsthatshouldbedetectedaredetected.

Visualconrmationisusedtovalidatethatthesettingsarecorrect,thatis,thatallobjectsthatshouldbetrackedaretracked.

Note

Tousevisualconrmation,InternetExplorerandAXISMediaControl(AMC)mustbeused.

Whenvisualconrmationisenabled,allmovingobjectsfoundbytheapplicationwillbeencircledandfollowedbypolygons.Ared polygonindicatesthattheobjectisfoundandisdetectedasamovingobject.Agreenpolygonindicatesthattheobjectisfoundbut isignoredbecauseitisnotintheincludeareaorbecauseofoneoftheignorelters.

Whenvisualconrmationisenabled,allmovingobjectsfoundbytheapplicationwillbeencircledandfollowedbypolygons.Ared polygonindicatesthattheobjectisfoundandthattrackinghasstarted.Agreenpolygonindicatesthattheobjectisfoundbutis ignoredbecauseitisnotintheincludeareaorbecauseofoneoftheignorelters.

Theyellowrectangleshowshowtheviewareafollowsmovingobjectsandhowtheviewareazoomlevelisadaptedtoincludeall movingobjects.

Toenablevisualconrmation:

1.SelecttheEnablevisualconrmationoption.

2.ClickSave.

Note

•Visualconrmationisdisabledafter15minutes.

•Aftermodifyingasetting,clickSavetoapplythechange.Thevideostreamwillberestartedanditmaytakeafewseconds

beforethechangeisapplied.

•Enablingvisualconrmationmayintroducevideolatency.

IgnoreFilters

IfAXISVideoMotionDetection3detectstoomanyunwantedobjects,startbymodifyingtheincludeandexcludeareas.Ifstilltoo manyobjectsaredetected,useoneormoreoftheignorelters.

IfAXISDigitalAutotrackingtrackstoomanyunwantedobjects,startbymodifyingtheincludeandexcludeareas.Ifstilltoo manyobjectsaretracked,useoneormoreoftheignorelters.

Supportedignorelters:

•Swayingobjects—Usedtoignoreobjectsthatonlymoveashortdistance

•Short-livedobjects—Usedtoignoreobjectsthatonlyappearintheimageforashortperiodoftime

•Smallobjects—Usedtoignoresmallobjects

Ignoreltersareappliedtoallmovingobjectsfoundbytheapplicationandshouldbeconguredwithcaretoensurethatno importantobjectsareignored.

Onlyuseignoreltersifneededanduseasfewltersaspossible.Enableandcongureonelteratatimeandusevisualconrmation toverifythesettingsbeforeenablinganotherlter.Whenconguringalter,startwithasmallltersize,clickSaveandusevisual conrmationtoverifythesettings.Ifrequired,increasetheltersizeinsmallstepsuntilthenumberofunwantedobjectsisreduced.

SwayingObjectIgnoreFilter

Theswayingobjectlterisusedtoavoiddetectingobjectsthatonlymoveashortdistance,forexamplemovingtrees,agsandtheir shadows.Usethelterifsuchobjectscausealotoffalsedetections.Iftheswayingobjectsinthescenearelarge,forexamplelarge

Page 39

AXISM1065-LWNetworkCamera

AXISVideoMotionDetection

pondsorlargetrees,useexcludeareasinsteadofthelter.Thelterwillbeappliedtoallmovingobjectsinsceneand,ifsetto avaluetoolarge,importantobjectsmightnotbedetected.

Theswayingobjectlterisusedtoavoidtrackingobjectsthatonlymoveashortdistance,forexamplemovingtrees,agsandtheir shadows.Usethelterifsuchobjectscausealotofunwantedtrackedobjects.Iftheswayingobjectsinthescenearelarge,for examplelargepondsorlargetrees,useexcludeareasinsteadofthelter.Thelterwillbeappliedtoallmovingobjectsinsceneand, ifsettoavaluetoolarge,importantobjectsmightnotbetracked.

Whentheswayingobjectlterisenabledandtheapplicationndsamovingobject,theobjectwillnotbereportedasdetected(red polygoninvisualconrmation)untilithastravelledadistancelargerthanthesetltersize.Thealarmsentbytheapplicationwillbe sentwhentheobjectisdetected.Ifthealarmisusedtostartarecording,congurethepre-triggertimesothattherecordingalso includesthetimetheobjectmovedinthescenebeforebeingdetected.

Whentheswayingobjectlterisenabledandtheapplicationndsamovingobject,trackingwillnotstart(redpolygoninvisual conrmation)untiltheobjecthastravelledadistancelargerthanthesetltersize.Ifthealarmsentbytheapplicationisused tostartarecording,congurethepre-triggertimesothattherecordingalsoincludesthetimetheobjectmovedinthescene beforetrackingstarted.

Toenablethelter:

1.SelecttheSwayingobjectsoption.

2.Clickonthe

3.Usethemousetoadjusttheltersize.Startwithasmallsize.Objectsmovingadistanceshorterthanthedistancefrom thecenterofthecrosstooneofthearrowheadswillbeignored.Theltercanbemovedtothelocationofaswaying objecttomakeiteasiertoadjustthesize.Notethatthelterwillbeappliedtoallobjectsintheimage,notonlytothe onesatthelocationwherethelterisplaced.

4.ClickSavetoapplythelter.

5.Usevisualconrmationtoverifythesettings.

6.Iftheresultisnotsatisfactory,increasetheltersizeinsmallsteps.

Theltersizecanalsobesetbyenteringavaluebetween10and50intheeld.Thevaluecorrespondstothedistancefromthe centerofthecrosstooneofthearrowheads.Thevalue100impliesthatanobjectmusttravelfromitsinitialpointtoonethirdofthe imagewidthorheightbeforebeingdetected.Thevalue50implieshalfthatdistance,thatis,theobjectmusttraveladistanceof onesixthoftheimagewidthorheightbeforebeingdetected.

Theltersizecanalsobesetbyenteringavaluebetween10and50intheeld.Thevaluecorrespondstothedistancefromthe centerofthecrosstooneofthearrowheads.Thevalue50impliesthatanobjectmusttravelfromitsinitialpointtoonesixthofthe imagewidthorheightbeforebeingtracked.Thevalue25implieshalfthatdistance,thatis,theobjectmusttraveladistanceofone twelfthoftheimagewidthorheightbeforebeingtracked.

Short-LivedObjectIgnoreFilter

Theshort-livedobjectlterisusedtoavoiddetectingobjectsthatonlyappearforashortperiodoftime,suchaslightbeamsfroma passingcarandquicklymovingshadows.Usethelterifsuchobjectscausealotoffalsedetections.

Theshort-livedobjectlterisusedtoavoidtrackingobjectsthatonlyappearforashortperiodoftime,suchaslightbeamsfroma passingcarandquicklymovingshadows.Usethelterifsuchobjectscausealotofunwantedtrackedobjects.

icontoshowtheltersizeintheimage.

Whentheshort-livedobjectlterisenabledandtheapplicationndsamovingobject,theobjectwillnotbereportedasdetected (redpolygoninvisualconrmation)untilthesettimeaspassed.Thealarmsentbytheapplicationwillbesentwhentheobjectis detected.Ifthealarmisusedtostartarecording,congurethepre-triggertimesothattherecordingalsoincludesthetimethe objectmovedinthescenebeforebeingdetected.

Whentheshort-livedobjectlterisenabledandtheapplicationndsamovingobject,trackingwillnotstart(redpolygoninvisual conrmation)untilthesettimeaspassed.Ifthealarmsentbytheapplicationisusedtostartarecording,congurethepre-trigger timesothattherecordingalsoincludesthetimetheobjectmovedinthescenebeforetrackingstarted.

Toenablethelter:

Page 40

AXISM1065-LWNetworkCamera

AXISVideoMotionDetection

1.SelecttheShort-livedobjectsoption.

2.Enterthenumberofsecondsintheeld.Thenumberofsecondsistheminimumtimethatmustpassbeforetheobjectis detected.Startwithasmallnumber.

3.Enterthenumberofsecondsintheeld.Thenumberofsecondsistheminimumtimethatmustpassbeforetracking starts.Startwithasmallnumber.

4.ClickSavetoapplythelter.

5.Usevisualconrmationtoverifythesettings.

6.Iftheresultisnotsatisfactory,increasetheltersizeinsmallsteps.

SmallObjectIgnoreFilter

Thesmallobjectlterisusedtoavoiddetectingobjectsthataretoosmall.Forexample,ifonlymovingcarsshouldbedetected,the smallobjectltercanbeusedtoavoiddetectingpeopleandanimals.

Thesmallobjectlterisusedtoavoidtrackingobjectsthataretoosmall.Forexample,ifonlymovingcarsshouldbetracked,the smallobjectltercanbeusedtoavoidtrackingpeopleandanimals.

Ifusingthesmallobjectlter,takeintoconsiderationthatanobjectfarfromthecameraappearssmallerthananobjectclosetothe camera.Ifthelterissettoignoreobjectsthesizeofaperson,peoplethatareclosetobecameracanstillbedetectedbecause theyarelargerthantheltersize.

Toenablethelter:

1.SelecttheSmallobjectsoption.

2.Clickonthe

3.Usethemousetoadjusttheltersize.Startwithasmallsize.Movingobjectsthattinsidetherectanglewillbeignored. Thelterdisplayedintheimagecanbemovedtomakeiteasiertocomparetheltersizewiththesizeofobjects intheimage.Notethatthelterwillbeappliedtoallobjectsintheimage,alsotoobjectsthatarenotlocatedat thepositionofthedisplayedlter.

4.ClickSavetoapplythelter.

5.Usevisualconrmationtoverifythesettings.

6.Iftheresultisnotsatisfactory,increasetheltersizeinsmallsteps.

Theltersizecanalsobesetbyenteringthewidthandheightintheelds.Thewidthandheightarethemaximumwidthand maximumheightoftheobjectstoignoreandaremeasuredinpercentoftheimagewidthandheight.Valuesbetween5and100 canbeused.

icontoshowtheltersizeintheimage.

UsingtheApplicationinanActionRule

ThefollowingexampleshowshowtoconguretheAxisproducttorecordvideowhenAXISVideoMotionDetection3detectsmotion.

Usingactionrules,Axisnetworkcamerascanbeconguredto,forexample,recordvideoorsendanoticationwhen AXISDigitalAutotrackingstartstrackingamovingobject.

ThefollowingexampleshowshowtoconguretheAxisproducttorecordvideotoanSDcardornetworksharewhen AXISDigitalAutotrackingstartstracking.Fordetailedinformationaboutthedifferentsettings,seetheAxisproduct’sonline helporUserManual.

Page 41

AXISM1065-LWNetworkCamera

AXISVideoMotionDetection

1.InsertanSDcardintheAxisproduct,orgotoSetup>SystemOptions>StorageintheAxisproduct’swebpagesand conguretheproducttouseanetworkshare.

2.Optionally,gotoSetup>Video&Audio>StreamProlesandcreateastreamproletouseforrecording.

3.GotoSetup>Events>ActionRulesandclickAddtocreateanewactionrule.

4.FromtheTriggerdrop-downlist,selectApplicationsandthenselectVMD3DigitalAutoTracking.

5.Congureothersettingsasrequired.Forexample,toonlyrecordvideoduringcertaintimeperiods,selectaSchedule.

6.UnderActions,selectRecordVideofromtheTypedrop-downlist.

7.Torecordtheviewareausedforautotracking,selecttheviewareacalledDigitalAutotrackingView.

8.Selectthestreamproleandstoragedevicetouseandcongurethepre-andpost-triggertimes.

9.MakesurethattheruleisenabledandthenclickOK.

Note

ToappearintheTriggerlist,theapplicationmustbestartedanditsstatusmustbeIdleorRunning.

Page 42

AXISM1065-LWNetworkCamera

Events

TheEventpagesallowyoutoconguretheAxisproducttoperformactionswhendifferenteventsoccur.Forexample,theproduct canstartarecordingorsendanemailnoticationwhenmotionisdetected.Thesetofconditionsthatdeneshowandwhen theactionistriggerediscalledanactionrule.

SetUpActionRules

Anactionruledenestheconditionsthatmustbemetfortheproducttoperformanaction,forexamplerecordvideoorsendan emailnotication.Ifmultipleconditionsaredened,allofthemmustbemettotriggertheaction.

Formoreinformationaboutavailabletriggersandactions,seeTriggersonpage42andActionsonpage43.

Tousemorethanonetriggerfortheactionrule,selectAdditionalconditionsandclickAddtoaddadditionaltriggers.Whenusing additionalconditions,allconditionsmustbemettotriggertheaction.

Topreventanactionfrombeingtriggeredrepeatedly,aWaitatleasttimecanbeset.Enterthetimeinhours,minutesandseconds, duringwhichthetriggershouldbeignoredbeforetheactionrulecanbeactivatedagain.

TherecordingDurationofsomeactionscanbesettoincludetimeimmediatelybeforeandaftertheevent.SelectPre-triggertime and/orPost-triggertimeandenterthenumberofseconds.WhenWhiletheruleisactiveisenabledandtheactionistriggered againduringthepost-triggertime,therecordingtimewillbeextendedwithanotherpost-triggertimeperiod.

Formoreinformation,seetheonlinehelp

Triggers

Availableactionruletriggersandconditionsinclude:

•Applications–Useinstalledapplicationstotriggertherule.SeeApplicationsonpage34.

•Detectors

-AudioDetection–Triggertherulewhenaudioisdetected.SeeAudioDetectiononpage33.

-Day/NightMode–Triggertherulewhentheproductswitchesbetweendaymode(IRcutlteron)andnight mode(IRcutlteroff).Thiscanforexamplebeusedtocontrolanexternalinfrared(IR)lightconnected toanoutputport.

-LiveStreamAccessed–Triggertherulewhenanystreamisaccessedandduringedgestorageplayback. Thiscanforexamplebeusedtosendnotications.

-PIR–TriggertherulewhenthePIRsensordetectsmotion.SeePIRSensoronpage33.

-Tampering–Triggertherulewhentamperingisdetected.SeeAboutcameratamperingonpage31.

•Hardware

-Network–Triggertheruleifnetworkconnectionislostorrestored.Thiscanforexamplebeusedtostart recordingtotheSDcard.

-Temperature–Triggertheruleifthetemperaturefallsoutsideorinsidetheoperatingrangeoftheproduct.This canforexamplebeusedtosendmaintenancenotications.

•InputSignal

-ManualTrigger–TriggertheruleusingtheManualTriggerbuttonintheLiveViewpage.SeeControlson theLiveViewPageonpage1 1.Thiscanforexamplebeusedtovalidateactionsduringproductinstallation andconguration.

Page 43

AXISM1065-LWNetworkCamera

Events

-VirtualInputs–canbeusedbyaVMS(VideoManagementSystem)totriggeractions.Virtualinputscan,for example,beconnectedtobuttonsintheVMSuserinterface.

•PTZ

-Moving–TriggertherulewhenthecameraviewmovesduetoaPTZoperation.Thiscanforexamplebeused asanadditionalconditiontopreventanactionruletriggeredbymotiondetectiontorecordvideowhilethe cameraviewmovesduetoaPTZoperation.

-PresetReached–Triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused withtheSendImagesactiontouploadimagesfromthepresetposition.

•Storage

-Disruption–Triggertheruleifstorageproblemsaredetected,forexampleifthestoragedeviceisunavailable, removed,full,lockedorifotherreadorwriteproblemsoccur.Thiscanforexamplebeusedtosendmaintenance notications.

-Recording–TriggerstherulewhentheAxisproductrecordstothestoragedevice.Therecordingstatustrigger canbeusedtonotifytheoperator,forexamplebyashingLEDlights,iftheproducthasstartedorstoppedto recordtothestoragedevice.Notethat,thistriggercanbeusedonlyforedgestoragerecordingstatus.

•System

-SystemReady–Triggertherulewhentheproducthasbeenstartedandallservicesarerunning.Thiscanfor examplebeusedtosendanoticationwhentheproductrestarts.

•Time

-Recurrence–Triggertheruleperiodically.SeeSetUpRecurrencesonpage45.Thiscanforexamplebeusedto uploadanimageevery5minutes.

-UseSchedule–Triggertheruleaccordingtotheselectedschedule.SeeCreateSchedulesonpage45.

Actions

Availableactionsinclude:

•IRIllumination–ActivateordeactivateIRlight.

•Day/NightVisionMode–Setdaymode(IRcutlteron)ornightmode(IRcutlteroff).

•OverlayText–Displayanoverlaytext.SeeHowtoincludeoverlaytextinanactionruleonpage24.

•PlayAudioClip–SeeAudioClipsonpage26.

•PTZControl

-PresetPosition–Gotoapresetposition.

-GuardTour–Startaguardtour.SeeAboutguardtoursonpage29.

•RecordVideo–Recordvideoandaudiotoaselectedstorage.Torecordaudio,useAACaudioencodingandmakesurethat audioisenabledintheselectedstreamprole.

•SendImages–Sendimagestoarecipient.

•SendNotication–Sendanoticationmessagetoarecipient.

•SendSNMPTrap–SendanSNMPtrapmessagetotheoperator.MakesurethatSNMPisenabledandcongured underSystemOptions>Network>SNMP.

•SendVideoClip–Sendavideocliptoarecipient.

Page 44

AXISM1065-LWNetworkCamera

Events

•StatusLED–FlashtheLEDindicator.Thiscanforexamplebeusedtovalidatetriggerssuchasmotiondetectionduring productinstallationandconguration.

•WDRMode–TheWDRModecanbeturnedonoroffwhentheactionruleistriggered.

AddRecipients

Theproductcansendmedialesandmessagestonotifyusersaboutevents.Beforetheproductcansendmedialesornotication messages,youmustdeneoneoremorerecipients.Forinformationaboutavailableoptions,seeRecipientTypesonpage44.

Toaddarecipient:

1.GotoEvents>RecipientsandclickAdd.

2.Enteradescriptivename.

3.SelectarecipientType.

4.Entertheinformationneededfortherecipienttype.

5.ClickTesttotesttheconnectiontotherecipient.

6.ClickOK.

RecipientTypes

Thefollowingrecipientsareavailable:

RecipientUsewithactionNotes

FTP

SFTPSendImages

HTTP

SendImages

SendNotication

SendVideoClip

SendImages

SendVideoClip

SendImages

Anemailrecipientcancontainmultipleemailaddresses.

EncryptedletransferusingSSHFileTransportProtocol (SFTP).SFTPisamoresecuremethodthanFTPbutle transfermightbeslower,especiallyforlargelessuchashigh resolutionvideo.

SpecifylogininformationfortheSFTPserverandtheserver’s publickeyMD5ngerprint(32hexadecimaldigits).

TheSFTPrecipientsupportsSFTPserversusingSSH-2with RSAandDSAhostkeytypes.RSAisthepreferredmethod.To useDSA,disabletheRSAkeyontheSFTPserver.

HTTPSSendImages

SendNotication

SendVideoClip

SendNotication

SendVideoClip

EncryptedletransferusingHyperTextTransferProtocol Secure(HTTPS).

SpecifylogininformationfortheHTTPSserverandvalidate theserver’scerticate.IfthereisaproxybetweentheAxis productandtheHTTPSserver,alsospecifytheproxysettings.

Page 45

AXISM1065-LWNetworkCamera

Events

NetworkShareSendImages

SendVideoClip

TCPSendNotication

Anetworksharecanalsobeusedasastoragedevicefor recordedvideo.GoSystemOptions>Storagetocongure anetworksharebeforesettingupacontinuousrecordingor anactionruletorecordvideo.Formoreinformationabout storagedevices,seeStorageonpage61.

SetUpEmailRecipients

Emailrecipientscanbeconguredbyselectingoneofthelistedemailproviders,orbyspecifyingtheSMTPserver,portand authenticationusedby,forexample,acorporateemailserver.

Note

Someemailprovidershavesecurityltersthatpreventusersfromreceivingorviewinglargeattachments,fromreceiving scheduledemailsandsimilar.Checktheemailprovider’ssecuritypolicytoavoiddeliveryproblemsandlockedemailaccounts.

Tosetupanemailrecipientusingoneofthelistedproviders:

1.GotoEvents>RecipientsandclickAdd.

2.EnteraNameandselectEmailfromtheTypelist.

3.EntertheemailaddressestosendemailstointheToeld.Usecommastoseparatemultipleaddresses.

4.SelecttheemailproviderfromtheProviderlist.

5.EntertheuserIDandpasswordfortheemailaccount.

6.ClickTesttosendatestemail.

Tosetupanemailrecipientusingforexampleacorporateemailserver,followtheinstructionsabovebutselectUserdenedas Provider.EntertheemailaddresstoappearassenderintheFromeld.SelectAdvancedsettingsandspecifytheSMTPserver address,portandauthenticationmethod.Optionally,selectUseencryptiontosendemailsoveranencryptedconnection.Theserver certicatecanbevalidatedusingthecerticatesavailableintheAxisproduct.Forinformationonhowtouploadcerticates,see Aboutcerticatesonpage52.

CreateSchedules

Schedulescanbeusedasactionruletriggersorasadditionalconditions,forexampletorecordvideoifmotionisdetectedoutside ofcehours.Useoneofthepredenedschedulesorcreateanewscheduleasdescribedbelow.

Tocreateanewschedule:

1.GotoEvents>SchedulesandclickAdd.

2.Enteradescriptivenameandtheinformationneededforadaily,weekly,monthlyoryearlyschedule.

3.ClickOK.

Tousethescheduleinanactionrule,selecttheschedulefromtheScheduledrop-downlistintheActionRuleSetuppage.

SetUpRecurrences

Recurrencesareusedtotriggeractionrulesrepeatedly,forexampleevery5minutesoreveryhour.

Tosetuparecurrence:

1.GotoEvents>RecurrencesandclickAdd.

2.Enteradescriptivenameandrecurrencepattern.

Page 46

AXISM1065-LWNetworkCamera

Events

3.ClickOK.

Tousetherecurrenceinanactionrule,rstselectTimefromtheTriggerdrop-downlistintheActionRuleSetuppageandthen selecttherecurrencefromtheseconddrop-downlist.

Tomodifyorremoverecurrences,selecttherecurrenceintheRecurrencesListandclickModifyorRemove.

Page 47

AXISM1065-LWNetworkCamera

Recordings

TheAxisproductcanbeconguredtorecordvideocontinuouslyoraccordingtoanactionrule:

•Tostartacontinuousrecording,seepage48.

•Tosetupactionrules,seepage42.

•Toaccessrecordings,seeFindRecordingsonpage47.

•Toplayrecordings,seePlayRecordingonpage47.

•Toexportarecordingasavideoclip,seeExportVideoCliponpage48.

•Tocongurecameracontrolledstorage,seeStorageonpage61.

FindRecordings

RecordingsstoredontheSDcardornetworksharecanbeaccessedfromtheRecordings>Listpage.Thepagelistsallrecordingson thestoragedeviceandshowseachrecording’sstartdateandtime,durationandtheeventthattriggeredtherecording.

Note

Therecording’sstartdateandtimeissetaccordingtotheAxisproduct’sdateandtimesettings.IftheAxisproductis conguredtouseatimezonedifferentfromthelocaltimezone,makesuretoconguretheRecordingtimeltersaccording totheproduct’stimezone.DateandtimesettingsareconguredunderSystemOptions>Date&Time,seeDate&Time onpage52.

Tondarecording,followthesesteps:

1.GotoRecordings>List.

2.Toreducethenumberofrecordingsdisplayed,selectthedesiredoptionsunderFilter:

Recordingtime–ListrecordingsthatstartedbetweentheFromandTotimes.

Event–Listrecordingsthatweretriggeredbyaspecicevent.Selectcontinuoustolistcontinuousrecordings.

Storage–Listrecordingsfromaspecicstoragedevice.

Sort–Specifyhowrecordingsshouldbesortedinthelist.

Results–Specifythemaximumnumberofrecordingstodisplay.

3.Toapplythelters,clicktheFilterbutton.Someltersmaytakealongtimetocomplete.

4.TherecordingsaredisplayedintheRecordinglist.

Toplayarecording,selecttherecordingandclickPlay.SeealsoPlayRecordingonpage47.

Toviewdetailedinformationaboutarecording,selecttherecordingandclickProperties.

Toexportarecordingorapartofarecordingasavideoclip,selecttherecordingandclickExport.SeealsoExportVideoClipon page48.

Toremovearecordingfromthestoragedevice,selecttherecordingandclickRemove.

PlayRecording

RecordingsontheSDcardornetworksharecanbeplayeddirectlyfromtheAxisproduct’swebpages.

Page 48

AXISM1065-LWNetworkCamera

Recordings

Toplayarecording,followthesesteps:

1.GotoRecordings>List.

2.Toreducethenumberofrecordingsdisplayed,selectthedesiredoptionsunderFilterandclicktheFilterbuttonto applythelters.SeealsoFindRecordingsonpage47.

3.SelecttherecordingandclickPlay.Therecordingwillbeplayedinanewbrowserwindow.

ExportVideoClip

RecordingsontheSDcardornetworksharecanbeexportedasvideoclips.Itispossibletoexportacompleterecordingora partofarecording.

Note

TheexportedrecordingisaMatroskavideole(.mkv).ToplaytherecordinginWindowsMediaPlayer,AXISMatroskaFile Splittermustbeinstalled.AXISMatroskaFileSplittercanbedownloadedfromwww.axis.com/techsup/software

Toexportavideoclip,followthesesteps:

1.GotoRecordings>List.

2.Toreducethenumberofrecordingsdisplayed,selectthedesiredoptionsunderFilterandclicktheFilterbuttonto applythelters.SeealsoFindRecordingsonpage47.

3.SelecttherecordingandclickExport.TheExportRecordingdialogopens.

4.Bydefault,thecompleterecordingisselected.Toexportapartoftherecording,modifythestartandstoptimes.

5.Optionally,enteralenamefortherecording.

6.ClickExport.

Note

Recordingscanalsobeexportedfromtheplaybackwindow.

ContinuousRecording

TheAxisproductcanbeconguredtocontinuouslysavevideotoastoragedevice.Forinformationaboutstoragedevices,seeStorage onpage61.Topreventthediskfrombecomingfull,itisrecommendedtocongurethedisktoautomaticallyremoveoldrecordings.

Ifanewstreamproleisselectedwhilearecordingisongoing,therecordingwillbestoppedandsavedintherecordinglistanda newrecordingwiththenewstreamprolewillstart.Allpreviouscontinuousrecordingswillremainintherecordinglistuntilthey areremovedmanuallyorthroughautomaticremovalofoldrecordings.

Tostartacontinuousrecording,followthesesteps:

1.GotoRecordings>Continuous.

2.SelectEnabled.

3.SelectthetypeofstoragedevicefromtheStoragelist.

4.SelectaStreamproletouseforcontinuousrecordings.Toincludeaudiointherecording,useAACaudioencodingand makesurethataudioisenabledintheselectedstreamprole.

5.ClickSavetosaveandstarttherecording.

Page 49

AXISM1065-LWNetworkCamera

Languages

MultiplelanguagescanbeinstalledintheAxisproduct.Allwebpagesincludingtheonlinehelpwillbedisplayedintheselected language.Toswitchlanguages,gotoSetup>Languagesandrstuploadthenewlanguagele.Browseandlocatetheleandclick theUploadLanguagebutton.SelectthenewlanguagefromthelistandclickSave.

Note

•Resettingtheproducttofactorydefaultsettingswilleraseanyuploadedlanguagelesandresettheproductlanguageto

English.

•ClickingtheRestorebuttonontheMaintenancepagewillnotaffectthelanguage.

•Armwareupgradewillnotaffectthelanguageused.Howeverifyouhaveuploadedanewlanguagetotheproductand

laterupgradethermware,itmayhappenthatthetranslationnolongermatchestheproduct'swebpages.Inthiscase, uploadanupdatedlanguagele.

•Alanguagealreadyinstalledintheproductwillbereplacedwhenacurrentoralaterversionofthelanguageleisuploaded.

Page 50

AXISM1065-LWNetworkCamera

SystemOptions

Security

Users

UseraccesscontrolisenabledbydefaultandcanbeconguredunderSystemOptions>Security>Users.Anadministratorcan setupotherusersbygivingthemusernamesandpasswords.Itisalsopossibletoallowanonymousviewerlogin,whichmeans thatanybodymayaccesstheLiveViewpage.

Theuserlistdisplaysauthorizedusersandusergroups(accesslevels):

•ViewershaveaccesstotheLiveViewpage

•Operatorshaveaccesstoallsettingsexcept:

-creatingandmodifyingPTZpresets

-creatingandmodifyingPTZcontrolsettings

-creatingandmodifyingprivacymasksettings

-uploadingapplicationsandlanguageles

-anyofthesettingsincludedintheSystemOptions

•Administratorshaveunrestrictedaccesstoallsettings.Theadministratorcanadd,modifyandremoveotherusers.

Note

NotethatwhentheoptionEncrypted&unencryptedisselected,thewebserverwillencryptthepassword.Thisisthedefault optionforanewunitoraunitresettofactorydefaultsettings.

UnderHTTP/RTSPPasswordSettings,selectthetypeofpasswordtoallow.Youmayneedtoallowunencryptedpasswordsifthereare viewingclientsthatdonotsupportencryption,orifyouupgradedthermwareandexistingclientssupportencryptionbutneed tologinagainandbeconguredtousethisfunctionality.

UnderUserSettings,selecttheEnableanonymousviewerloginoptiontoallowanonymoususersaccesstotheLiveViewpage.

SelecttheEnableanonymousPTZcontrollogintoallowanonymoususersaccesstothePTZcontrols.

DeselecttheEnableBasicSetupoptiontohidetheBasicSetupmenu.BasicSetupprovidesquickaccesstosettingsthatshouldbe madebeforeusingtheAxisproduct.

ONVIF

ONVIF(OpenNetworkVideoInterfaceForum)isaglobalinterfacestandardthatmakesiteasierforendusers,integrators,consultants, andmanufacturerstotakeadvantageofthepossibilitiesofferedbynetworkvideotechnology.ONVIFenablesinteroperability betweendifferentvendorproducts,increasedexibility,reducedcostandfuture-proofsystems.

BycreatingauseryouautomaticallyenableONVIFcommunication.UsetheusernameandpasswordwithallONVIFcommunication withtheproduct.Formoreinformationseewww.onvif.org

IPAddressFilter

IPaddresslteringisenabledontheSystemOptions>Security>IPAddressFilterpage.Onceenabled,thelistedIPaddressare allowedordeniedaccesstotheAxisproduct.SelectAlloworDenyfromthelistandclickApplytoenableIPaddressltering.

Theadministratorcanaddupto256IPaddressentriestothelist(asingleentrycancontainmultipleIPaddresses).

Page 51

AXISM1065-LWNetworkCamera

SystemOptions

HTTPS

HTTPS(HyperTextTransferProtocoloverSecureSocketLayer,orHTTPoverSSL)isawebprotocolprovidingencryptedbrowsing. HTTPScanalsobeusedbyusersandclientstoverifythatthecorrectdeviceisbeingaccessed.Thesecuritylevelprovidedby HTTPSisconsideredadequateformostcommercialexchanges.

TheAxisproductcanbeconguredtorequireHTTPSwhenusersfromdifferentusergroups(administrator,operator,viewer)login.

TouseHTTPS,anHTTPScerticatemustrstbeinstalled.GotoSystemOptions>Security>Certicatestoinstallandmanage certicates.SeeAboutcerticatesonpage52.

ToenableHTTPSontheAxisproduct:

1.GotoSystemOptions>Security>HTTPS

2.SelectanHTTPScerticatefromthelistofinstalledcerticates.

3.Optionally,clickCiphersandselecttheencryptionalgorithmstouseforSSL.

4.SettheHTTPSConnectionPolicyforthedifferentusergroups.

5.ClickSavetoenablethesettings.

ToaccesstheAxisproductviathedesiredprotocol,intheaddresseldinabrowser,enterhttps://fortheHTTPSprotocol andhttp://fortheHTTPprotocol.

TheHTTPSportcanbechangedontheSystemOptions>Network>TCP/IP>Advancedpage.

IEEE802.1X

IEEE802.1Xisastandardforport-basedNetworkAdmissionControlprovidingsecureauthenticationofwiredandwirelessnetwork devices.IEEE802.1XisbasedonEAP(ExtensibleAuthenticationProtocol).

ToaccessanetworkprotectedbyIEEE802.1X,devicesmustbeauthenticated.Theauthenticationisperformedbyanauthentication server,typicallyaRADIUSserver,examplesofwhichareFreeRADIUSandMicrosoftInternetAuthenticationService.

InAxisimplementation,theAxisproductandtheauthenticationserveridentifythemselveswithdigitalcerticatesusingEAP-TLS (ExtensibleAuthenticationProtocol-TransportLayerSecurity).ThecerticatesareprovidedbyaCerticationAuthority(CA). Youneed:

•aCAcerticatetoauthenticatetheauthenticationserver.

•aCA-signedclientcerticatetoauthenticatetheAxisproduct.

Tocreateandinstallcerticates,gotoSystemOptions>Security>Certicates.SeeAboutcerticatesonpage52.

ToallowtheproducttoaccessanetworkprotectedbyIEEE802.1X:

1.GotoSystemOptions>Security>IEEE802.1X.

2.SelectaCACerticateandaClientCerticatefromthelistsofinstalledcerticates.

3.UnderSettings,selecttheEAPOLversionandprovidetheEAPidentityassociatedwiththeclientcerticate.

4.ChecktheboxtoenableIEEE802.1XandclickSave.

Note

Forauthenticationtoworkproperly,thedateandtimesettingsintheAxisproductshouldbesynchronizedwithanNTP server.SeeDate&Timeonpage52.

Page 52

AXISM1065-LWNetworkCamera

SystemOptions

Aboutcerticates

Certicatesareusedtoauthenticatedevicesonanetwork.Typicalapplicationsincludeencryptedwebbrowsing(HTTPS),network protectionviaIEEE802.1Xandsecureuploadofimagesandnoticationmessagesforexampleviaemail.Twotypesofcerticates canbeusedwiththeAxisproduct:

Server/Clientcerticates-ToauthenticatetheAxisproduct.AServer/Clientcerticatecanbeself-signedorissuedbyaCerticate Authority(CA).Aself-signedcerticateofferslimitedprotectionandcanbeusedbeforeaCA-issuedcerticatehasbeenobtained.

CAcerticates-Toauthenticatepeercerticates,forexamplethecerticateofanauthenticationserverincasetheAxisproductis connectedtoanIEEE802.1Xprotectednetwork.TheAxisproductisshippedwithseveralpreinstalledCAcerticates.

Note

•Iftheproductisresettofactorydefault,allcerticates,exceptpreinstalledCAcerticates,willbedeleted.

•Iftheproductisresettofactorydefault,allpreinstalledCAcerticatesthathavebeendeletedwillbereinstalled.

Howtocreateaself-signedcerticate

1.GotoSetup>SystemOptions>Security>Certicates.

2.ClickCreateself-signedcerticateandprovidetherequestedinformation.

HowtocreateandinstallaCA-signedcerticate

1.Createaself-signedcerticate,seeHowtocreateaself-signedcerticateonpage52.

2.GotoSetup>SystemOptions>Security>Certicates.

3.ClickCreatecerticatesigningrequestandprovidetherequestedinformation.

4.CopythePEM-formattedrequestandsendtotheCAofyourchoice.

5.Whenthesignedcerticateisreturned,clickInstallcerticateanduploadthecerticate.

HowtoinstalladditionalCAcerticates

1.GotoSetup>SystemOptions>Security>Certicates.

2.ClickInstallcerticateanduploadthecerticate.

AudioSupport

SelectEnableaudiosupporttoallowclientstoretrieveaudiostreamsfromtheAxisproduct.Forinformationonhowtocongure audiosettings,seeSetUpAudioonpage25.

Note

DeselectingthisoptionwilldisableaudiogloballyintheAxisproduct,forconguredeventsandproleswithaudioaswell.

Date&Time

TheAxisproduct’sdateandtimesettingsareconguredunderSystemOptions>Date&Time.

CurrentServerTimedisplaysthecurrentdateandtime(24hclock).Thetimecanbedisplayedin12hclockinthetextoverlay(see

below).

Tochangethedateandtimesettings,selectthepreferredTimemodeunderNewServerTime:

•Synchronizewithcomputertime–Setsdateandtimeaccordingtothecomputer’sclock.Withthisoption,dateand timearesetonceandwillnotbeupdatedautomatically.

Page 53

AXISM1065-LWNetworkCamera

SystemOptions

•SynchronizewithNTPServer–ObtainsdateandtimefromanNTPserver.Withthisoption,dateandtimesettingsare updatedcontinuously.ForinformationonNTPsettings,seeNTPCongurationonpage55.

IfusingahostnamefortheNTPserver,aDNSservermustbecongured.SeeDNSCongurationonpage55.

•Setmanually–Allowsyoutomanuallysetdateandtime.

IfusinganNTPserver,selectyourTimezonefromthedrop-downlist.Ifrequired,checkAutomaticallyadjustfordaylightsaving timechanges.

TheDate&TimeFormatUsedinImagesisthedateandtimeformatdisplayedasatextoverlayinthevideostream.Usethe predenedformatsorseeFileNaming&Date/TimeFormatsintheonlinehelpforinformationonhowtocreatecustomdateand

timeformats.Toincludedateandtimeintheoverlaytext,gotoVideo&AudioandselectIncludedateandIncludetime.

Network

BasicTCP/IPSettings

TheAxisproductsupportsIPversion4andIPversion6.Bothversionscanbeenabledsimultaneously,andatleastoneversion mustalwaysbeenabled.

NetworkInterfaceMode

ThenetworkinterfacetotheAXISproductcanbewiredorwireless.Differentsettingscanbeusedforeachnetworkinterface,but onlyonecanbeusedatatime.InAutomodetheproductwilluseawirelessnetworkunlessanetworkcableisconnected,inwhich caseitwillusethewirednetwork.InWiredmodetheproductwillrequireanetworkcabletoconnecttothenetwork.

IPv4AddressConguration

Bydefault,theAxisproductissettouseIPv4(IPversion4)andtoobtaintheIPaddressautomaticallyviaDHCP.TheIPv4settingsare conguredunderSystemOptions>Network>TCP/IP>Basic.

DHCP(DynamicHostCongurationProtocol)allowsnetworkadministratorstocentrallymanageandautomatetheassignmentof IPaddresses.DHCPshouldonlybeenabledifusingdynamicIPaddressnotication,oriftheDHCPcanupdateaDNSserver.Itis thenpossibletoaccesstheAxisproductbyname(hostname).

IfDHCPisenabledandtheproductcannotbeaccessed,runAXISIPUtilitytosearchthenetworkforconnectedAxisproducts,orreset theproducttothefactorydefaultsettings(seepage65)andthenperformtheinstallationagain.

TouseastaticIPaddress,checkUsethefollowingIPaddressandspecifytheIPaddress,subnetmaskanddefaultrouter.

IPv6AddressConguration

IfIPv6(IPversion6)isenabled,theAxisproductwillreceiveanIPaddressaccordingtothecongurationinthenetworkrouter.

ToenableIPv6,gotoSystemOptions>Network>TCP/IP>Basic.OthersettingsforIPv6shouldbeconguredinthenetworkrouter.

ARP/Ping

Theproduct’sIPaddresscanbeassignedusingARPandPing.Forinstructions,seeAssignIPAddressUsingARP/Pingonpage54.

TheARP/Pingserviceisenabledbydefaultbutisautomaticallydisabledtwominutesaftertheproductisstarted,orassoonasanIP addressisassigned.Tore-assignIPaddressusingARP/Ping,theproductmustberestartedtoenableARP/Pingforanadditional twominutes.

Todisabletheservice,gotoSystemOptions>Network>TCP/IP>BasicandcleartheoptionEnableARP/PingsettingofIPaddress.

Pingingtheproductisstillpossiblewhentheserviceisdisabled.

Page 54

AXISM1065-LWNetworkCamera

SystemOptions

AssignIPAddressUsingARP/Ping

Theproduct'sIPaddresscanbeassignedusingARP/Ping.Thecommandmustbeissuedwithin2minutesofconnectingpower.

1.AcquireafreestaticIPaddressonthesamenetworksegmentasthecomputer.

2.Locatetheserialnumber(S/N)ontheproductlabel.

3.Openacommandpromptandenterthefollowingcommands:

Linux/Unixsyntax

arp-s<IPaddress><serialnumber>temp ping-s408<IPaddress>

Linux/Unixexample

arp-s192.168.0.12500:40:8c:18:10:00temp ping-s408192.168.0.125

Windowssyntax(thismayrequirethatyourunthecommandpromptasanadministrator)

arp-s<IPaddress><serialnumber> ping-l408-t<IPaddress>

Windowsexample(thismayrequirethatyourunthecommandpromptasanadministrator)

arp-s192.168.0.12500-40-8c-18-10-00 ping-l408-t192.168.0.125

4.Checkthatthenetworkcableisconnectedandthenrestarttheproductbydisconnectingandreconnectingpower.

5.ClosethecommandpromptwhentheproductrespondswithReplyfrom192.168.0.125:...orsimilar.

6.Openabrowserandtypehttp://<IPaddress>intheLocation/Addresseld.

ForothermethodsofassigningtheIPaddress,seethedocumentAssignanIPAddressandAccesstheVideoStreamonAxisSupport webatwww .axis.com/techsup

Note

•ToopenacommandpromptinWindows,opentheStartmenuandtypecmdintheRun/Searcheld.

•TousetheARPcommandinWindows8/Windows7/WindowsVista,right-clickthecommandprompticonandselect

Runasadministrator.

•ToopenacommandpromptinMacOSX,opentheTerminalutilityfromApplication>Utilities.

AXISVideoHostingSystem(AVHS)

AVHSusedinconjunctionwithanAVHSservice,provideseasyandsecureInternetaccesstoliveandrecordedvideoaccessiblefrom anylocation.FormoreinformationandhelptondalocalAVHSServiceProvidergotowww.axis.com/hosting

TheAVHSsettingsareconguredunderSystemOptions>Network>TCPIP>Basic.ThepossibilitytoconnecttoanAVHSservice isenabledbydefault.Todisable,cleartheEnableAVHSbox.

One-clickenabled-Pressandholdtheproduct’scontrolbutton(seeHardwareOverviewonpage8)forabout3secondsto connecttoanAVHSserviceovertheInternet.Onceregistered,AlwayswillbeenabledandtheAxisproductstaysconnectedto theAVHSservice.Iftheproductisnotregisteredwithin24hoursfromwhenthebuttonispressed,theproductwilldisconnect fromtheAVHSservice.

Always-TheAxisproductwillconstantlyattempttoconnecttotheAVHSserviceovertheInternet.Onceregisteredtheproductwill stayconnectedtotheservice.Thisoptioncanbeusedwhentheproductisalreadyinstalledanditisnotconvenienttousethe one-clickinstallation.

Page 55

AXISM1065-LWNetworkCamera

SystemOptions

AXISInternetDynamicDNSService

AXISInternetDynamicDNSServiceassignsahostnameforeasyaccesstotheproduct.Formoreinformation,seewww.axiscam.net

ToregistertheAxisproductwithAXISInternetDynamicDNSService,gotoSystemOptions>Network>TCP/IP>Basic.Under Services,clicktheAXISInternetDynamicDNSServiceSettingsbutton(requiresaccesstotheInternet).Thedomainnamecurrently registeredatAXISInternetDynamicDNSservicefortheproductcanatanytimeberemoved.

Note

AXISInternetDynamicDNSServicerequiresIPv4.

AdvancedTCP/IPSettings

DNSConguration

DNS(DomainNameService)providesthetranslationofhostnamestoIPaddresses.TheDNSsettingsareconguredunderSystem Options>Network>TCP/IP>Advanced.

SelectObtainDNSserveraddressviaDHCPtousetheDNSsettingsprovidedbytheDHCPserver.

Tomakemanualsettings,selectUsethefollowingDNSserveraddressandspecifythefollowing:

Domainname-Enterthedomain(s)tosearchforthehostnameusedbytheAxisproduct.Multipledomainscanbeseparatedby semicolons.Thehostnameisalwaystherstpartofafullyqualieddomainname,forexample,myserveristhehostnameinthe fullyqualieddomainnamemyserver.mycompany.comwheremycompany.comisthedomainname.

Primary/SecondaryDNSserver-EntertheIPaddressesoftheprimaryandsecondaryDNSservers.ThesecondaryDNSserveris optionalandwillbeusediftheprimaryisunavailable.

NTPConguration

NTP(NetworkTimeProtocol)isusedtosynchronizetheclocktimesofdevicesinanetwork.TheNTPsettingsareconguredunder SystemOptions>Network>TCP/IP>Advanced.

SelectObtainNTPserveraddressviaDHCPtousetheNTPsettingsprovidedbytheDHCPserver.

Tomakemanualsettings,selectUsethefollowingNTPserveraddressandenterthehostnameorIPaddressoftheNTPserver.

HostNameConguration

TheAxisproductcanbeaccessedusingahostnameinsteadofanIPaddress.ThehostnameisusuallythesameastheassignedDNS name.ThehostnameisconguredunderSystemOptions>Network>TCP/IP>Advanced.

SelectObtainhostnameviaIPv4DHCPtousehostnameprovidedbytheDHCPserverrunningonIPv4.

SelectUsethehostnametosetthehostnamemanually.

SelectEnabledynamicDNSupdatestodynamicallyupdatelocalDNSserverswhenevertheAxisproduct’sIPaddresschanges. Formoreinformation,seetheonlinehelp

Link-LocalIPv4Address

Link-LocalAddressisenabledbydefaultandassignstheAxisproductanadditionalIPaddresswhichcanbeusedtoaccess theproductfromotherhostsonthesamesegmentonthelocalnetwork.TheproductcanhaveaLink-LocalIPandastatic orDHCP-suppliedIPaddressatthesametime.

ThisfunctioncanbedisabledunderSystemOptions>Network>TCP/IP>Advanced.

Page 56

AXISM1065-LWNetworkCamera

SystemOptions

HTTP

TheHTTPportusedbytheAxisproductcanbechangedunderSystemOptions>Network>TCP/IP>Advanced.Inadditiontothe defaultsetting,whichis80,anyportintherange1024–65535canbeused.

HTTPS

TheHTTPSportusedbytheAxisproductcanbechangedunderSystemOptions>Network>TCP/IP>Advanced.Inadditionto thedefaultsetting,whichis443,anyportintherange1024–65535canbeused.

ToenableHTTPS,gotoSystemOptions>Security>HTTPS.Formoreinformation,seeHTTPSonpage51.

NATtraversal(portmapping)forIPv4

Anetworkrouterallowsdevicesonaprivatenetwork(LAN)toshareasingleconnectiontotheInternet.Thisisdonebyforwarding networktrafcfromtheprivatenetworktothe“outside”,thatis,theInternet.Securityontheprivatenetwork(LAN)isincreased sincemostroutersarepre-conguredtostopattemptstoaccesstheprivatenetwork(LAN)fromthepublicnetwork(Internet).

UseNATtraversalwhentheAxisproductislocatedonanintranet(LAN)andyouwishtomakeitavailablefromtheother(WAN)side ofaNATrouter.WithNATtraversalproperlycongured,allHTTPtrafctoanexternalHTTPportintheNATrouterisforwardedto theproduct.

NATtraversalisconguredunderSystemOptions>Network>TCP/IP>Advanced.

Note

•ForNATtraversaltowork,thismustbesupportedbytherouter.TheroutermustalsosupportUPnP

•Inthiscontext,routerreferstoanynetworkroutingdevicesuchasaNATrouter,Networkrouter,InternetGateway,

Broadbandrouter,Broadbandsharingdevice,orasoftwaresuchasarewall.

Enable/Disable-Whenenabled,theAxisproductattemptstocongureportmappinginaNATrouteronyournetwork,usingUPnP NotethatUPnP

UsemanuallyselectedNATrouter-SelectthisoptiontomanuallyselectaNATrouterandentertheIPaddressfortherouterin theeld.Ifnorouterisspecied,theproductautomaticallysearchesforNATroutersonyournetwork.Ifmorethanonerouteris found,thedefaultrouterisselected.

AlternativeHTTPport-SelectthisoptiontomanuallydeneanexternalHTTPport.Enteraportintherange1024–65535.Ifthe porteldisemptyorcontainsthedefaultsetting,whichis0,aportnumberisautomaticallyselectedwhenenablingNATtraversal.

Note

•AnalternativeHTTPportcanbeusedorbeactiveevenifNATtraversalisdisabled.ThisisusefulifyourNATrouterdoesnot

•Ifyouattempttomanuallyenteraportthatisalreadyinuse,anotheravailableportisautomaticallyselected.

•Whentheportisselectedautomaticallyitisdisplayedinthiseld.Tochangethis,enteranewportnumberandclickSave.

FTP

TheFTPserverrunningintheAxisproductenablesuploadofnewrmware,userapplications,etc.TheFTPservercanbedisabled underSystemOptions>Network>TCP/IP>Advanced.

mustbeenabledintheproduct(seeSystemOptions>Network>UPnP).

supportUPnPandyouneedtomanuallycongureportforwardingintheNATrouter.

Note

ThisFTPserverhasnothingtodowiththeproduct’sabilitytotransferimagesviaFTPtootherlocationsandservers.

RTSP

TheRTSPserverrunningintheAxisproductallowsaconnectingclienttostartanH.264stream.TheRTSPportnumbercanbe changedunderSystemOptions>Network>TCP/IP>Advanced.Thedefaultportis554.

Page 57

AXISM1065-LWNetworkCamera

SystemOptions

Note

H.264videostreamswillnotbeavailableiftheRTSPserverisdisabled.

Wireless

Statusofwirelessnetworks

Toviewalistofavailablewirelessnetworks,gotoSystemOptions>Network>Wireless.Thestatusofwirelessnetworkslististhe resultofanetworkscanandprovidesthefollowinginformation:

•SSIDisthenameofawirelessnetwork.

•Modeshowsthetypeofnetwork,forexampleMaster(anaccesspoint).

•Securityshowsthetypeofsecuritythenetworkuses.

•Channelshowsthewirelesschannelcurrentlyinuse.

•Signalstrengthshowsthequality,thestrength,ofthesignal.

•BitrateshowsthecurrentbitrateinMbit/s.Thiscanonlybeshownfortheaccesspointcurrentlyinuse.

ClickRefreshtoperformanewscan.

AccesspointswithadisabledSSIDBroadcastwillnotappearunlesstheAxisproductisassociatedwithit.Oncethewireless connectionisestablished,thenetworktheAxisproductiscurrentlylinkedtoisshowninblue.Anetworkusingunsupported securityisshowningrey.

WirelessSettings

Important

•Toestablishandmaintaincommunication,allwirelesssettingsmustbeexactlythesameintheAxisproductasinthe

accesspoint.

•AlwayscongureorchangethewirelesssettingsintheAxisproductrst,beforechangingthesettingsinthewireless

accesspoint.

•Keys,passphrasesandcerticatesthatareusedforsecuritymustbeenteredmanually.ContactyourNetworkAdministrator

fortherequirementsfortheselectedaccesspoint.

ThewirelesssettingscontrolhowtheAxisproductinteractswiththewirelessnetwork.Apartfromidentifyingthewirelessnetwork,it isalsopossibletoenablewirelessencryption.

SelectEnablecongestioncontroltosecurethewirelessconnectionbetweentheAxisproductandaccesspointincongested environments,forexamplewheretherearemanyavailablenetworksandwheremanydevicesareusingthesameaccesspoint.

CongestioncontrolusesaRequestToSend/ClearToSend(RTS/CTS)handshaketoreserveaccesstothewirelessmediabefore transmittingapacket.Usingthehandshakedecreasesthroughputsinceitaddsanoverhead.Insomesituations,however,the overheadoftheRTS/CTShandshakeislowerthantheoverheadcausedbycollisionsonthewirelessmedia.Congestioncontrolis disabledbydefault.

SelectEnableWLANpairingbuttontoallowthewirelessAxisproducttoconnecttoanaccesspointbypushingabuttononboth ofthedeviceswithina120secondtimewindow.Duringthistimethedeviceswillautomaticallydiscovereachotherandagree onaconguration.

Makesuretheaccesspointalsohaspushbuttonconguration(PBC)enabledandthattheAxisproductisnotconnectedtothewired network.AfterasuccessfulpairinganyWLANsettingssetbytheuserintheAxisproductareoverwritten.TheWLANpairingbutton isenabledbydefault;deselectthisoptiontopreventunauthorizedWLANpairing.

SSIDisthenameoftheselectedwirelessnetwork,whichmustbeexactlythesameasthenameinthewirelessaccesspoint.Ifthe eldisleftblanktheAxisproductwillnotconnecttoanywirelessnetwork.

Page 58

AXISM1065-LWNetworkCamera

SystemOptions

Note

SSIDissometimeswrittenasESSID.

SelectthenetworkSecuritymethod.Allsettingsmustmatchthesettingsintheaccesspoint.Thefollowingsecuritymethodsare supported,whereWPATM-/WPA2

•WPA-/WPA2–PSK.Seepage58.

•WPA-/WPA2-Enterprise.Seepage58.

•Nosecurity(notrecommended).Seepage60.

Ifapplicable,selecttheNetworktype.SelectMastertoaccessthenetworkviaanaccesspointtoaccessanyotherwireless deviceandcreatealocalnetwork.

Aboutwirelesscerticates

Wirelessnetworkcerticatesareusedtoauthenticatedevicesonawirelessnetwork.Wirelessnetworksusingthe WPATM-/WPA2-EnterprisesecuritymethodareprotectedbyEAPOL(ExtensibleAuthenticationProtocolOverLan),whichispartof theIEEE802.1Xstandard.Theclientauthenticatestheserverusingdigitalcerticates.Theserverauthenticatestheclientusing digitalcerticatesorapassworddependingontheselectedWPA-Enterprisetype.

Toinstallandmanagecerticates,gotoSystemOptions>Security>Certicates.Formoreinformation,seeAboutcerticateson page52andIEEE802.1Xonpage51.

WPATM-/WPA2

ThesecuritymethodWPA-/WPA2–PSKisdesignedforsmallnetworksanddoesnotrequireanauthenticationserver.TheAxis productusesaPSK(Pre-SharedKey)toauthenticatewiththeaccesspoint.Thekeycanbeenteredeitherasmanualhex—a64 hexdecimalnumber(0–9,A-F)—orapassphraseusing8–63ASCIIcharacters.Thelongerthepassphrase,themoresecureisthekey.

HowtocongurethewirelesssettingsusingWPA-/WPA2–PSK

1.GotoSystemOptions>Security>Wireless.

-PSK

-EnterpriseismoresecurethanWPA-/WPA2-PSK,whichinturnismoresecurethanWEP:

2.IntheSSIDeld,typethenameofthewirelessnetwork.

3.UnderSecurity,selectWPA-/WPA2–PSK.

4.EntertherequiredPassphrasefortheaccesspoint.

5.ClickSave.

WPATM-/WPA2-Enterprise

ThesecuritymethodWPA-/WPA2-Enterpriseisdesignedforlargenetworksandrequiresanauthenticationserver.Thenetworkis protectedbyEAPOL(ExtensibleAuthenticationProtocolOverLan).

SelecttheWPA-Enterprisetypebeingusedbytheaccesspoint:

•EAP-TLS.Seepage58.

•EAP-PEAP/MSCHAPv2.Seepage59.

AboutEAP-TLS

TheauthenticationprotocolEAP-TLS(ExtensibleAuthenticationProtocol-TransportLayerSecurity)allowstheclientandserverto authenticateeachotherusingdigitalcerticatesprovidedbyaCerticationAuthority.Togainaccesstotheprotectednetwork,the Axisproductpresentsitscerticatetothenetworkaccesspoint.Accessisgrantedifthecerticateisapproved.

Page 59

AXISM1065-LWNetworkCamera

SystemOptions

Important

Toensuresuccessfulcerticatevalidation,timesynchronizationshouldbeperformedonallclientsandserverspriorto conguration.

HowtocongurethewirelesssettingsusingWPATM-/WPA2-EnterpriseandEAP-TLS

1.GotoSystemOptions>Security>Wireless.

2.IntheSSIDeld,typethenameofthewirelessnetwork.

3.UnderSecurity,selectWPA-/WPA2–Enterprise.

4.UnderWPA-Enterprisetype,selectEAP-TLS.

5.EntertheuserIdentityassociatedwithyourcerticate.

6.SelecttheEAPOLversion(1or2)asusedintheaccesspoint.

7.SelecttheCAcerticateandtheclientcerticatetouseforwirelessauthentication.

8.ClickSave.

AboutEAP-PEAP/MSCHAPv2

TheauthenticationprotocolEAP-PEAP/MSCHAPv2(ExtensibleAuthenticationProtocol-ProtectedExtensibleAuthentication Protocol/MicrosoftChallengeHandshakeAuthenticationProtocol)allowstheclienttoauthenticatethenetworkusingadigital certicateprovidedbyaCerticationAuthority.Thenetworkauthenticatestheclientusinganidentityandapassword.Togain accesstotheprotectednetwork,theAxisproductpresentsitsidentityandpasswordtothenetworkaccesspoint.Ifthesecredentials areapproved,theaccesspointallowsaccessonapreconguredport.

Important

Toensuresuccessfulcerticatevalidation,timesynchronizationshouldbeperformedonallclientsandserverspriorto conguration.

HowtocongurethewirelesssettingsusingWPA

1.GotoSystemOptions>Security>Wireless

2.IntheSSIDeld,typethenameofthewirelessnetwork.

3.UnderSecurity,selectWPA-/WPA2–Enterprise.

4.UnderWPA-Enterprisetype,selectEAP-PEAP/MSCHAPv2.

5.EntertheuserIdentityassociatedwithyourcerticate.

6.EnterthePasswordforyouruseridentity.

7.SelectthePEAPVersion(0or1)asusedintheaccesspoint.

8.SelectthePEAPLabelthattheaccesspointuseswhenusingPEAPversion1.Select1touseclientEAPencryption;select 2touseclientPEAPencryption.

-/WPA2-EnterpriseandEAP-PEAP/MSCHAPv2

9.SelecttheEAPOLversion(1or2)asusedintheaccesspoint.

10.SelecttheCAcerticatewithwhichtovalidatethenetwork/APcerticate.

11.ClickSave.

Page 60

AXISM1065-LWNetworkCamera

SystemOptions

NoSecurity

TheNosecurityoptionprovidesnoprotectionagainstattacks.Itisnotarecommendedmethodandshouldonlybeusedduring shortperiodsandexceptionalcases.

Tocongurethewirelesssettingswithnosecurity:

1.Selectthenetworktypebeingusedbytheaccesspoint,Master.

2.ClickSave.

SOCKS

SOCKSisanetworkingproxyprotocol.TheAxisproductcanbeconguredtouseaSOCKSservertoreachnetworksontheother sideofarewallorproxyserver.ThisfunctionalityisusefuliftheAxisproductislocatedonalocalnetworkbehindarewall,and notications,uploads,alarms,etcneedtobesenttoadestinationoutsidethelocalnetwork(forexampletheInternet).

SOCKSisconguredunderSystemOptions>Network>SOCKS.Formoreinformation,seetheonlinehelp

QoS(QualityofService)

QoS(QualityofService)guaranteesacertainlevelofaspeciedresourcetoselectedtrafconanetwork.AQoS-awarenetwork prioritizesnetworktrafcandprovidesagreaternetworkreliabilitybycontrollingtheamountofbandwidthanapplicationmayuse.

TheQoSsettingsareconguredunderSystemOptions>Network>QoS.UsingDSCP(DifferentiatedServicesCodepoint)values,the Axisproductcanmarkdifferenttypesoftrafc.

Note

LiveaudioDSCPwillbeequaltolivevideoDSCPifH.264overRTSPisused.

SNMP

TheSimpleNetworkManagementProtocol(SNMP)allowsremotemanagementofnetworkdevices.AnSNMPcommunityisthe groupofdevicesandmanagementstationrunningSNMP.Communitynamesareusedtoidentifygroups.

AXISVideoMIB(ManagementInformationBase)forvideohardwarecanbeusedtomonitorAxis-specic,hardware-related issuesthatmayneedadministrativeattention.FormoreinformationaboutAXISVideoMIBandtodownloadMIBles,goto

www.axis.com/techsup

ToenableandcongureSNMPintheAxisproduct,gototheSystemOptions>Network>SNMPpage.

Dependingonthelevelofsecurityrequired,selecttheversiononSNMPtouse.

TrapsareusedbytheAxisproducttosendmessagestoamanagementsystemonimportanteventsandstatuschanges.CheckEnable trapsandentertheIPaddresswherethetrapmessageshouldbesentandtheTrapcommunitythatshouldreceivethemessage.

Note

IfHTTPSisenabled,SNMPv1andSNMPv2cshouldbedisabled.

TrapsforSNMPv1/v2areusedbytheAxisproducttosendmessagestoamanagementsystemonimportanteventsandstatus changes.CheckEnabletrapsandentertheIPaddresswherethetrapmessageshouldbesentandtheTrapcommunitythat shouldreceivethemessage.

Thefollowingtrapsareavailable:

•Coldstart

•Warmstart

•Linkup

•Authenticationfailed

Page 61

AXISM1065-LWNetworkCamera

SystemOptions

Note

AllAXISVideoMIBtrapsareenabledwhenSNMPv1/v2ctrapsareenabled.Itisnotpossibletoturnonoroffspecictraps.

SNMPv3providesencryptionandsecurepasswords.TousetrapswithSNMPv3,anSNMPv3managementapplicationisrequired.

TouseSNMPv3,HTTPSmustbeenabled,seeHTTPSonpage51.ToenableSNMPv3,checktheboxandprovidetheinitialuser password.

Note

Theinitialpasswordcanonlybesetonce.Ifthepasswordislost,theAxisproductmustberesettofactorydefault,see ResettoFactoryDefaultSettingsonpage65.

UPnP

TheAxisproductincludessupportforUPnP systemsandclientsthatsupportthisprotocol.

UPnP

canbedisabledunderSystemOptions>Network>UPnP

RTP/H.264

.UPnP

isenabledbydefaultandtheproductisautomaticallydetectedbyoperating

TheRTPportrangeandmulticastsettingsareconguredunderSystemOptions>Network>RTP.

TheRTPportrangedenestherangeofportsfromwhichthevideo/audioportsareautomaticallyselected.Formulticaststreams, onlycertainIPaddressesandportnumbersshouldbeused.

SelectAlwaysMulticastVideoand/orAlwaysMulticastAudiotostartmulticaststreamingwithoutopeninganRTSPsession.

Bonjour

TheAxisproductincludessupportforBonjour.Bonjourisenabledbydefaultandtheproductisautomaticallydetectedbyoperating systemsandclientsthatsupportthisprotocol.

BonjourcanbedisabledunderSystemOptions>Network>Bonjour.

Storage

SDCard

TICE

NO NO

TICE TICE

Topreventdatacorruption,theSDcardshouldbeunmountedbeforeremoval.

Note

ForSDcardrecommendationsseewww.axis.com

Note

DonotinsertorejecttheSDcardwhiletheproductisrunning.Theproductwillloseitsconnectiontothewirelessnetwork. Reboottheproducttoreestablishthewirelessconnectionafterthecardhasbeeninsertedorejected.

TheAxisproductsupportsmicroSD/microSDHC/microSDXCcards.

ThefollowingSDcardlesystemsaresupported:

•ext4—recommendedduetoitsresilienceagainstdatalossifthecardisejectedorifthereisabruptpowerloss.Toaccess datastoredonthecardfromtheWindowsoperatingsystem,athird-partyext4driverorapplicationisrequired.

•vFAT—supportedbymostoperatingsystemsforpersonalcomputers.

Page 62

AXISM1065-LWNetworkCamera

SystemOptions

TheSDcardismanagedontheSystemOptions>Storagepage.ClickSDCardtoopenStorageManagement.

Ifthecard’sstatusshowsasfailed,clickCheckdisktoseeiftheproblemcanbefoundandthentryRepair.Thisoptionisonly availableforSDcardswithext4.ForSDcardswithvFAT,useacardreaderorcomputertotroubleshootthecard.

Toavoidllingthecard,itisrecommendedtoremoverecordingscontinuously.UnderGeneralSettings,selectRemoverecordings olderthanandselectthenumberofdaysorweeks.

Tostopwritingtothecardandprotectrecordingsfrombeingremoved,selectLockunderGeneralSettings.

MountandUnmountSDCard

TICE

NO NO

TICE TICE

Topreventcorruptionofrecordings,theSDcardshouldalwaysbeunmountedbeforeitisejected.

TheSDcardisautomaticallymountedwhenthecardisinsertedintotheAxisproductorwhentheproductisstarted.Amanual mountisonlyrequiredifthecardhasbeenunmountedandnotejectedandre-inserted.

TounmounttheSDcard:

1.OpentheAxisproduct’swebpagesandgotoSetup>SystemOptions>Storage.

2.ClickSDCard.

3.ClickUnmount.

4.Thecardcannowberemoved.

FormatSDCard

TICE

NO NO

TICE TICE

FormattingtheSDcardwillremovealldataandrecordingsstoredonthecard.

TheAxisproductcanbeconguredtoautomaticallyformatSDcardsthatareinsertedintotheproduct.Ifautoformatisenabledand anSDcardisinserted,theproductwillcheckiftheSDcardhastheext4lesystem.Ifthecardhasadifferentlesystem,the cardwillautomaticallybeformattedtoext4.

Important

Ifautoformatisenabled,onlyuseneworemptySDcards.Anydatastoredonthecardwillbelostwhenthecardisinserted intotheAxisproduct.

Toenableautomaticformatting,followthesesteps:

1.OpentheAxisproduct’swebpagesandgotoSetup>SystemOptions>Storage.

2.ClickSDCard.

3.UnderGeneralSettings,selectAutoformatto.

4.ClickOKtosavesettings.

AnSDcardinsertedintotheproductcanbemanuallyformattedtooneofthesupportedlesystems.Tomanuallyformatthe SDcard,followthesesteps:

1.InserttheSDcardintheSDcardslot.

2.OpentheAxisproduct’swebpagesandgotoSetup>SystemOptions>Storage.

3.ClickSDCard.

4.ClickFormatandselectthedesiredlesystem.

Page 63

AXISM1065-LWNetworkCamera

SystemOptions

5.ClickOKtostartformattingthecard.

EncryptSDCardData

Topreventunauthorizedindividualsandsystemsfromaccessingrecordedvideo,theSDcardcontentcanbeencrypted.Encryption canonlybeenabledwhenthecardisunmounted.Afterenablingencryption,theSDcardmustbeformattedsothatnounencrypted dataremainsonthecard.Thecardmustalsobemountedbeforeitcanbeused.

Note

Ifautoformatisenabled,thecardwillbeformattedandmountedautomaticallywhenencryptionisenabled.Theformatand mountstepsbelowshouldthenbeskipped.

ToencrypttheSDcardcontent:

1.OpentheAxisproduct’swebpagesandgotoSetup>SystemOptions>Storage.

2.ClickSDCardtoopenStorageManagement.

3.IftheSDcardismounted,clickUnmounttounmountthecard.

4.ClickEncrypt.

5.SelectEnableSDcardencryptionandenterapassphrase.

6.BackinStorageManagement,clickFormattoformattheSDcard.

7.ClickMounttomounttheSDcard.

Itispossibletochangethepassphrasewithoutreformattingthecard.OpenStorageManagement,clickEncryptandenterthe oldandnewpassphrases.Thepassphrasecanonlybechangedwhenthecardismounted.Changingthepassphrasedoesnot disruptongoingrecordings.

Todisableencryption,unmounttheSDcardandfollowthestepsabovebutcleartheEnableSDcardencryptionoption.Thecard mustbeformattedandmountedwhenencryptionhasbeendisabled.

NetworkShare

NetworkshareallowsyoutoaddnetworkstoragesuchasaNAS(network-attachedstorage).TheNASshallbededicatedfor recordingsanddatafromtheAxisproductsconnectedtothenetwork.ForinformationaboutreferenceNASdevices,goto

www.axis.com/products/axis-camera-companion/support-and-documentation

Note

ForNASrecommendationsseewww.axis.com

Toaddanetworkshare:

1.GotoSystemOptions>Storage.

2.ClickNetworkShare.

3.EntertheIPaddress,DNSorBonjournametothehostserverintheHosteld.

4.EnterthenameoftheshareintheShareeld.Subfolderscannotbeused.

5.Ifrequired,selectThesharerequiresloginandentertheusernameandpassword.

6.ClickConnect.

ToclearallrecordingsanddatafromtheAxisproduct’sfolderonthedesignatedshare,clickClearunderStorageTools.

Toavoidllingtheshare,itisrecommendedtoremoverecordingscontinuously.UnderRecordingSettings,selectRemoverecordings olderthanandselectthenumberofdaysorweeks.

Page 64

AXISM1065-LWNetworkCamera

SystemOptions

Tostopwritingtotheshareandprotectrecordingsfrombeingremoved,selectLockunderRecordingSettings.

Maintenance

TheAxisproductprovidesseveralmaintenancefunctions.TheseareavailableunderSystemOptions>Maintenance.

ClickRestarttoperformacorrectrestartiftheAxisproductisnotbehavingasexpected.Thiswillnotaffectanyofthecurrent settings.

Note

ArestartclearsallentriesintheServerReport.

ClickRestoretoresetmostsettingstothefactorydefaultvalues.Thefollowingsettingsarenotaffected:

•thebootprotocol(DHCPorstatic)

•thestaticIPaddress

•thedefaultrouter

•thesubnetmask

•thesystemtime

•theIEEE802.1Xsettings

•thewirelesssettings

•uploadedapplicationsarekeptbutmustberestarted

ClickDefaulttoresetallsettings,includingtheIPaddress,tothefactorydefaultvalues.Thisbuttonshouldbeusedwithcaution.The Axisproductcanalsoberesettofactorydefaultusingthecontrolbutton,seeResettoFactoryDefaultSettingsonpage65.

ToidentifytheproductortesttheStatusLED,clickFlashLEDunderIdentifyandspecifythedurationinseconds,minutesorhours. Thiscanbeusefulforidentifyingtheproductamongotherproductsinstalledinthesamelocation.

Forinformationaboutrmwareupgrade,seeUpgradetheFirmwareonpage67.

Support

SupportOverview

TheSystemOptions>Support>SupportOverviewpageprovidesinformationontroubleshootingandcontactinformation, shouldyourequiretechnicalassistance.

SeealsoTroubleshootingonpage67.

SystemOverview

TogetanoverviewoftheAxisproduct’sstatusandsettings,gotoSystemOptions>Support>SystemOverview.Informationthat canbefoundhereincludesrmwareversion,IPaddress,networkandsecuritysettings,eventsettings,imagesettingsandrecentlog items.ManyofthecaptionsarelinkstotheproperSetuppage.

Logs&Reports

TheSystemOptions>Support>Logs&Reportspagegenerateslogsandreportsusefulforsystemanalysisandtroubleshooting.If contactingAxisSupport,pleaseprovideavalidServerReportwithyourquery.

SystemLog-Providesinformationaboutsystemevents.

Page 65

AXISM1065-LWNetworkCamera

SystemOptions

AccessLog-Listsallfailedattemptstoaccesstheproduct.TheAccessLogcanalsobeconguredtolistallconnectionstothe product(seebelow).

ServerReport-Providesinformationabouttheproductstatusinapop-upwindow.TheAccessLogisautomaticallyincluded intheServerReport.

Youcanviewordownloadtheserverreport.Downloadingtheserverreportcreatesa.ziplethatcontainsacompleteserverreport textleinUTF–8format.SelecttheIncludesnapshotwithdefaultimagesettingsoptiontoincludeasnapshotoftheproduct’sLive View.Theserverreport.zipleshouldalwaysbeincludedwhencontactingsupport.

ParameterList-Showstheproduct'sparametersandtheircurrentsettings.Thismayproveusefulwhentroubleshootingor whencontactingAxisSupport.

ConnectionList-Listsallclientsthatarecurrentlyaccessingmediastreams.

CrashReport-Generatesanarchivewithdebugginginformation.Thereporttakesseveralminutestogenerate.

Advanced

Scripting

Scriptingallowsexperienceduserstocustomizeandusetheirownscripts.

TICE

NO NO

TICE TICE

ImproperusemaycauseunexpectedbehaviorandlossofcontactwiththeAxisproduct.

Axisstronglyrecommendsthatyoudonotusethisfunctionunlessyouunderstandtheconsequences.AxisSupportdoesnotprovide assistanceforproblemswithcustomizedscripts.

ToopentheScriptEditor,gotoSystemOptions>Advanced>Scripting.Ifascriptcausesproblems,resettheproducttoits factorydefaultsettings,seepage65.

Formoreinformation,seewww.axis.com/developer

FileUpload

Files,forexamplewebpagesandimages,canbeuploadedtotheAxisproductandusedascustomsettings.Touploadale,go toSystemOptions>Advanced>FileUpload.

Uploadedlesareaccessedthroughhttp://<ipaddress>/local/<user>/<filename>where<user>isthe selectedusergroup(viewer,operatororadministrator)fortheuploadedle.

PlainCong

PlainCongisforadvanceduserswithexperienceofAxisproductconguration.Mostparameterscanbesetandmodiedfrom thispage.

ToopenPlainCong,gotoSystemOptions>Advanced>PlainCong.AxisSupportdoesnotprovideassistance.

ResettoFactoryDefaultSettings

Important

Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultwillresetallsettings,includingtheIP address,tothefactorydefaultvalues.

Note

Theinstallationandmanagementsoftwaretoolsareavailablefromthesupportpagesonwww.axis.com/techsup

Page 66

AXISM1065-LWNetworkCamera

SystemOptions

Toresettheproducttothefactorydefaultsettings:

1.Disconnectpowerfromtheproduct.

2.Pressandholdthecontrolbuttonandreconnectpower.SeeHardwareOverviewonpage8.

3.Keepthecontrolbuttonpressedfor15–30secondsuntilthestatusLEDindicatorashesamber.

4.Releasethecontrolbutton.TheprocessiscompletewhenthestatusLEDindicatorturnsgreen.Theproducthasbeenreset tothefactorydefaultsettings.IfnoDHCPserverisavailableonthenetwork,thedefaultIPaddressis192.168.0.90

5.Usingtheinstallationandmanagementsoftwaretools,assignanIPaddress,setthepassword,andaccessthevideostream.

Itisalsopossibletoresetparameterstofactorydefaultviathewebinterface.GotoSetup>SystemOptions>Maintenanceand clickDefault.

Page 67

AXISM1065-LWNetworkCamera

Troubleshooting

ChecktheFirmware

Firmwareissoftwarethatdeterminesthefunctionalityofnetworkdevices.Oneofyourrstactionswhentroubleshootingaproblem shouldbetocheckthecurrentrmwareversion.Thelatestversionmaycontainacorrectionthatxesyourparticularproblem.The currentrmwareversionintheAxisproductisdisplayedinthepageSetup>BasicSetupandinSetup>About.

UpgradetheFirmware

Important

•Yourdealerreservestherighttochargeforanyrepairattributabletofaultyupgradebytheuser.

•Preconguredandcustomizedsettingsaresavedwhenthermwareisupgraded(providingthefeaturesareavailableinthe

newrmware)althoughthisisnotguaranteedbyAxisCommunicationsAB.

Note

•Aftertheupgradeprocesshascompleted,theproductwillrestartautomatically.Ifrestartingtheproductmanuallyafterthe

upgrade,wait10minutesevenifyoususpecttheupgradehasfailed.

•WhenyouupgradetheAxisproductwiththelatestrmwarefromAxiswebsite,theproductreceivesthelatestfunctionality

available.Alwaysreadtheupgradeinstructionsandreleasenotesavailablewitheachnewreleasebeforeupgrading thermware.

Toupgradetheproduct’srmware:

1.Downloadthelatestrmwareletoyourcomputer,availablefreeofchargeatwww.axis.com/techsup

2.GotoSetup>SystemOptions>Maintenanceintheproduct’swebpages.

3.UnderUpgradeServer,clickBrowseandlocatetheleonyourcomputer.

4.ClickUpgrade.

5.Waitapproximately10minuteswhiletheproductisbeingupgradedandrestarted.Thenaccesstheproduct.

6.GotoSetup>BasicSetuptoverifythermwareupgrade.

AXISCameraManagementcanbeusedformultipleupgrades.Seewww.axis.comformoreinformation.

EmergencyRecoveryProcedure

Ifpowerornetworkconnectionislostduringtheupgrade,theprocessfailsandtheproductmaybecomeunresponsive.Flashing redStatusindicatorindicatesafailedupgrade.Torecovertheproduct,followthestepsbelow.Theserialnumberisfoundon theproduct’slabel.

1.InUNIX/Linux,typethefollowingfromthecommandline:

arp-s<IPaddress><serialnumber>temp ping-l408<IPaddress>

InWindows,typethefollowingfromacommand/DOSprompt(thismayrequirethatyourunthecommandpromptas anadministrator):

arp-s<IPaddress><serialnumber> ping-l408-t<IPaddress>

2.Iftheproductdoesnotreplyin30seconds,restartitandwaitforareply.PressCTRL+CtostopPing.

Page 68

AXISM1065-LWNetworkCamera

Troubleshooting

3.Openabrowserandtypeintheproduct’sIPaddress.Inthepagethatopens,usetheBrowsebuttontoselecttheupgrade letouse.ThenclickLoadtorestarttheupgradeprocess.

4.Aftertheupgradeiscomplete(1–10minutes),theproductautomaticallyrestartsandshowsasteadygreenonthe Statusindicator.

5.Reinstalltheproduct,referringtotheInstallationGuide.

Iftheemergencyrecoveryproceduredoesnotgettheproductupandrunningagain,contactAxissupportatwww.axis.com/techsup/

Note

Theemergencyrecoveryprocedureonlyworksonthewiredinterface.

Symptoms,PossibleCausesandRemedialActions

Problemsupgradingthermware

Firmwareupgradefailure

ProblemssettingtheIPaddress

WhenusingARP/Ping

Theproductislocatedona differentsubnet

TheIPaddressisbeingused byanotherdevice

Ifthermwareupgradefails,theproductreloadsthepreviousrmware.Checkthermware leandtryagain.

Trytheinstallationagain.TheIPaddressmustbesetwithintwominutesafterpowerhasbeen appliedtotheproduct.EnsurethePinglengthissetto408.Forinstructions,seeAssignIPAddress UsingARP/Pingonpage54.

IftheIPaddressintendedfortheproductandtheIPaddressofthecomputerusedtoaccessthe productarelocatedondifferentsubnets,youwillnotbeabletosettheIPaddress.Contactyour networkadministratortoobtainanIPaddress.

DisconnecttheAxisproductfromthenetwork.RunthePingcommand(inaCommand/DOS window,typepingandtheIPaddressoftheproduct):

PossibleIPaddressconict withanotherdeviceonthe samesubnet

Theproductcannotbeaccessedfromabrowser

Cannotlogin

TheIPaddresshasbeen changedbyDHCP

Certicateerrorwhenusing IEEE802.1X

ThestaticIPaddressintheAxisproductisusedbeforetheDHCPserversetsadynamicaddress. ThismeansthatifthesamedefaultstaticIPaddressisalsousedbyanotherdevice,theremay beproblemsaccessingtheproduct.

WhenHTTPSisenabled,ensurethatthecorrectprotocol(HTTPorHTTPS)isusedwhenattempting tologin.Youmayneedtomanuallytypehttporhttpsinthebrowser’saddresseld.

Ifthepasswordfortheuserrootislost,theproductmustberesettothefactorydefaultsettings. SeeResettoFactoryDefaultSettingsonpage65.

IPaddressesobtainedfromaDHCPserveraredynamicandmaychange.IftheIPaddresshas beenchanged,useAXISIPUtilityorAXISCameraManagementtolocatetheproductonthe network.Identifytheproductusingitsmodelorserialnumber,orbytheDNSname(ifthename hasbeencongured).

Ifrequired,astaticIPaddresscanbeassignedmanually.Forinstructions,seethedocumentAssign anIPAddressandAccesstheVideoStreamonAxisSupportwebatwww.axis.com/techsup.

Forauthenticationtoworkproperly,thedateandtimesettingsintheAxisproductshouldbe synchronizedwithanNTPserver.SeeDate&Timeonpage52.

•Ifyoureceive:Replyfrom<IPaddress>:bytes=32;time=10... thismeansthattheIPaddressmayalreadybeinusebyanotherdeviceonthenetwork. ObtainanewIPaddressfromthenetworkadministratorandreinstalltheproduct.

•Ifyoureceive:Requesttimedout,thismeansthattheIPaddressisavailable forusewiththeAxisproduct.Checkallcablingandreinstalltheproduct.

Page 69

AXISM1065-LWNetworkCamera

Troubleshooting

Theproductisaccessiblelocallybutnotexternally

RoutercongurationTocongureyourroutertoallowincomingdatatrafctotheAxisproduct,enabletheNAT-traversal

Firewallprotection

Defaultroutersrequired

ProblemswithstreamingH.264

ProblemswithAXISMedia Control(InternetExplorer only)

NoH.264displayedinthe client

MulticastH.264only accessiblebylocalclients

NomulticastH.264 displayedintheclient

featurewhichwillattempttoautomaticallyconguretheroutertoallowaccesstotheAxis product,seeNATtraversal(portmapping)forIPv4onpage56.TheroutermustsupportUPnP

ChecktheInternetrewallwithyournetworkadministrator.

CheckifyouneedtoconguretheroutersettingsfromSystemOptions>Network>TCP/IP> Basic.

ToenabletheupdatingofvideoimagesinInternetExplorer,setthebrowsertoallowActiveX controls.Also,makesurethatAXISMediaControlisinstalledonyourcomputer.

CheckthattherelevantH.264connectionmethodsandcorrectinterfaceareenabledintheAMC ControlPanel(streamingtab).SeeAXISMediaControl(AMC)onpage14.

IntheAMCControlPanel,selecttheH.264tabandclickSettodefaultH.264decoder.

CheckthatRTSPisenabledunderSystemOptions>Network>TCP/IP>Advanced.

Checkifyourroutersupportsmulticasting,oriftheroutersettingsbetweentheclientandthe productneedtobecongured.TheTTL(TimeToLive)valuemayneedtobeincreased.

CheckwithyournetworkadministratorthatthemulticastaddressesusedbytheAxisproduct arevalidforyournetwork.

PoorrenderingofH.264 images

Colorsaturationisdifferent inH.264andMotionJPEG

Lowerframeratethan expected

Videoandimageproblems,general

Imageunsatisfactory

Disturbedfocus

Checkwithyournetworkadministratortoseeifthereisarewallpreventingviewing.

Ensurethatyourgraphicscardisusingthelatestdriver.Thelatestdriverscanusuallybe downloadedfromthemanufacturer’swebsite.

Modifythesettingsforyourgraphicsadapter.Refertotheadapter’sdocumentationformore information.

SeePerformanceConsiderationsonpage74.

Reducethenumberofapplicationsrunningontheclientcomputer.

Limitthenumberofsimultaneousviewers.

Checkwiththenetworkadministratorthatthereisenoughbandwidthavailable.

CheckintheAMCControlPanel(H.264tag)thatvideoprocessingisnotsettoDecodeonly keyframes.

cetodatasheetremoved Lowertheimageresolution.

Themaximumframespersecondisdependentontheutilityfrequency(60/50Hz)oftheAxis product.

CheckthevideostreamandcamerasettingsunderSetup>Video&Audio>VideoStreamand Setup>Video&Audio>CameraSettings.

Tochangethecamerafocus,seeHowtochangethecamerafocusonpage17

Page 70

AXISM1065-LWNetworkCamera

Troubleshooting

Noaudio

Incorrectsetup

Pooraudioquality

Stuttering

Unsynchronizedaudioand videousingH.264

Distortedaudio

Storageanddiskmanagementproblems

Storagedisruption

Checkthesoundcardinthecomputer.Ensurethatmuteisnotselectedandthatthevolume settingsarecorrect.

CheckthatEnableaudiosupportisselectedunderSetup>SystemOptions>Security>Audio Support.

CheckthatthecorrectAudioInputsourceisselectedunderSetup>Video&Audio>Audio Settings.

Reducethenumberoflistenersandviewers.Decreaseimageresolutionandcompression.

Synchronizetheproduct’sdateandtimesettingswithanNTPserver.GotoSetup>System Options>Date&Time.

CheckthatthecorrectAudioInputsourceisselectedunderSetup>Video&Audio>Audio Settings.

Astoragedisruptionalarmissentifastoragedeviceisunavailable,removed,full,lockedorifother readorwriteproblemsoccur.Toidentifythesourceoftheproblem,checktheSystemLogunder SystemOptions>Support>Logs&Reports.Dependingontheproblem,itmightbenecessaryto re-mountthestoragedevice.

Forinformationonhowtosetupastoragedisruptionalarm,seeEventsonpage42.

Videocannotberecorded

SDcardcannotbemountedReformattheSDcardandthenclickMount.

PIRSensorsensitivity

ThePIRsensorrarelytriggers ornotatall

CheckthattheSDcardisnotwriteprotected(thatis,readonly).

TICE

NO NO

TICE TICE

Formattingthecardwillremoveallcontent,includingallrecordings,fromtheSDcard.

SinceIRlightisblockedbyglass,thePIRsensorwillnotworkiftheproductisplacedbehind awindoworsimilar.

Page 71

AXISM1065-LWNetworkCamera

TechnicalSpeciﬁcations

Youcanndthelatestversionofthetechnicalspecicationsatwww.axis.com

Camera

Imagesensor

LensFixedfocallength,2.8mm,F2.0

DayandnightAutomaticallyremovableIRcutlter

Minimum illumination

Shuttertime

Pan/Tilt/Zoom

1/3"progressivescanRGBCMOS

Horizontaleldofview:1 10° Verticaleldofview:61° M12mount,xediris,IRcorrected

Color:0.25luxat50IREF2.0 B/W:0.05luxat50IREF2.0,0luxwithIRilluminationon

1/28000sto1/5swith50Hz 1/32500sto1/5swith60Hz

DigitalPTZ

Video

Video compression

Resolutions1920x1080HDTV1080pto320x240

Framerate

Video streaming

Imagesettings

Audio

Audio streaming

Audio compression

Audio input/output

Network

Wireless interface

SecurityPasswordprotection,IPaddressltering,HTTPS

Supported protocols

H.264(MPEG-4Part10/AVC)Baseline,MainandHighProles,MotionJPEG

Upto25/30fps(50/60Hz)inallresolutions

Multiple,individuallycongurablestreamsinH.264andMotionJPEG Axis'ZipstreamtechnologyinH.264 Controllableframerateandbandwidth VBR/MBRH.264

Compression,Color,Brightness,Sharpness,Contrast,Whitebalance,Exposurecontrol,Day/Nightshiftlevel, Rotation:0°,180°,Textandimageoverlay,Privacymasks,Mirroringofimages,WDR

Two-way,halfduplex

AAC-LC8/16kHz,G.711PCM8kHz,G.726ADPCM8kHz Congurablebitrate

Built-inmicrophone(canbedisabled),Built-inspeaker82dB-SPL(at0.5m/20in)

Internalantenna IEEE802.1 1a/b/g/n@2.4GHz,@5GHz

authentication,Useraccesslog WPA/WPA2-PSK,WPA,WPA2Enterprise WLANpairingbutton(Wi-FiProtectedSetup

IPv4/v6,HTTP,HTTPS SNMPv1/v2c/v3(MIB-II),DNS,DynDNS,NTP,RTSP,RTP,TCP,UDP,IGMP,RTCP,ICMP,DHCP,ARP,SOCKS

,SSL/TLS

,QoSLayer3DiffServ,FTP,CIFS/SMB,SMTP,Bonjour,UPnP

encryption,IEEE802.1X

PBCcompatible)

networkaccesscontrol,Digest

Systemintegration

Page 72

AXISM1065-LWNetworkCamera

TechnicalSpeciﬁcations

Application Programming Interface

Analytics

EventtriggersAnalytics,Edgestorageevents,Built-inPIR

EventactionsFileupload:FTP,HTTP,networkshareandemail

Data streaming

Built-in installation aids

OpenAPIforsoftwareintegration,includingVAPIX®andAXISCameraApplicationPlatform;specications atwww.axis.com AXISVideoHostingSystem(AVHS)withOne-ClickConnection ONVIFProleS;specicationsatwww.onvif.org

AXISVideoMotionDetection3,Audiodetection SupportforAXISCameraApplicationPlatform,AXISCrossLineDetection,AXISDigitalAutotrackingandthird-party applications,seewww .axis.com/acap

Notication:email,HTTP,HTTPSandTCP Videoandaudiorecordingtoedgestorage,ActivationofIR-LED,Audioclipplayback,Overlaytext Pre-andpost-alarmvideobuffering

Eventdata

Pixelcounter

Page 73

AXISM1065-LWNetworkCamera

TechnicalSpeciﬁcations

General

Casing

SustainabilityPVCfree,64%recycledplastic

Memory512MBRAM,256MBFlash

Power

IRillumination

ConnectorsMicroUSBtypeBforpoweronly

Storage

PIRsensor

Operating conditions

Storage conditions

Approvals

Dimensions

Weight

Included accessories

Optional accessories

Video management software

Languages

Warranty

Polycarbonate,Aluminium,recycledplastic Color:WhiteNCSS1002-B Forrepaintinginstructionsofskincoverorcasingandimpactonwarranty,contactyourAxispartner.

4.75–5.25VDC,typical2.7W,max5.0W

IRillumination,LEDwithadjustableintensity.Rangeupto10m(32ft)

RJ4510BASE-T/100BASE-TX

SupportformicroSD/microSDHC/microSDXCcard Supportforrecordingtodedicatednetwork-attachedstorage(NAS) ForSDcardandNASrecommendationsseewww.axis.com

Passiveinfrared(PIR)motionsensorwithcongurablesensitivity. Maxrange:6m(19.7ft)

0°Cto40°C(32°Fto104°F) Humidity10-85%RH(non-condensing)

-40°Cto65°C(-40°Fto149°F) Humidity10-85%RH(non-condensing)

EMC

EN55032ClassB,EN61000-3-2,EN61000-3-3,EN55024,EN61000-6-1,EN61000-6-2, FCCPart15SubpartBClassB,ICES-003ClassB,VCCIClassB,RCMAS/NZSCISPR32ClassB,KN24,KN-35

Wireless

EN300328,EN301489-1,EN301489-17,EN301893,FCCPart15SubpartC,FCCPart15SubpartE,RSS-247

Safety

IEC/EN/UL60950-1,IEC/EN62471

106mmx60mmx37mm(4.17x2.36x1.46in)

128g(0.28lb)

Powersupply,InstallationGuide,Mountbracket,Tabletopstand,Windowsdecoder1-userlicense

AXISSurveillancemicroSDXC™Card64GB AXIST8415InstallationDisplay T91A10MountingKit Formoreaccessories,seewww.axis.com

AXISCompanionvideomanagementsoftware,AXISCameraStation,VideomanagementsoftwarefromAxis’ ApplicationDevelopmentPartnersavailableonwww .axis.com/techsup/software

English,German,French,Spanish,Italian,Russian,SimpliedChinese,Japanese,Korean,Portuguese,Traditional Chinese

Axis3-yearwarrantyandAXISExtendedWarrantyoption,seewww.axis.com/warranty

a.ThisproductincludessoftwaredevelopedbytheOpenSSLProjectforuseintheOpenSSLToolkit(http://www.openssl.org/),and

cryptographicsoftwarewrittenbyEricYoung(eay@cryptsoft.com).

Environmentalresponsibility: www.axis.com/environmental-responsibility

Page 74

AXISM1065-LWNetworkCamera

TechnicalSpeciﬁcations

PerformanceConsiderations

Whensettingupyoursystem,itisimportanttoconsiderhowvarioussettingsandsituationswillaffectperformance.Somefactors affecttheamountofbandwidth(thebitrate)required,otherscanaffecttheframerate,andsomeaffectboth.Iftheloadonthe CPUreachesitsmaximum,thiswillalsoaffecttheframerate.

Thefollowingfactorsareamongthemostimportanttoconsider:

•Highimageresolutionand/orlowercompressionlevelsresultinimagescontainingmoredata.Bandwidthaffected.

•AccessbylargenumbersofMotionJPEGand/orunicastH.264clients.Bandwidthaffected.

•Simultaneousviewingofdifferentstreams(resolution,compression)bydifferentclients.Effectonframerateand bandwidth.

•AccessingMotionJPEGandH.264videostreamssimultaneously.Framerateandbandwidthaffected.

•Heavyusageofeventsettingsaffecttheproduct’sCPUload.Framerateaffected.

•UsingHTTPSmayreduceframerate,inparticularifstreamingMotionJPEG.

•Heavynetworkutilizationduetopoorinfrastructure.Bandwidthaffected.

•Viewingonpoorlyperformingclientcomputerslowersperceivedperformance.Framerateaffected.

•RunningmultipleAXISCameraApplicationPlatform(ACAP)applicationssimultaneouslymayaffecttheframerateand thegeneralperformance.

Page 75

Date:August2016

PartNo.1632649

Axis 0810-003 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual