Axis 0765-001 Quick Start Guide

INSTALLATION GUIDE

AXIS F1004 Sensor Unit

About this Document

This document includes instructions for
installing AXIS F1004 Sensor Unit.
Previous experience of networking will
be beneficial when installing the
product.

Legal Considerations

Video and audio surveillance can be
prohibited by laws that vary from
country to country. Check the laws in
your local region before using this
product for surveillance purposes.

Liability

Every care has been taken in the
preparation of this document. Please
inform your local Axis office of any
inaccuracies or omissions. Axis
Communications AB cannot be held
responsible for any technical or
typographical errors and reserves the
right to make changes to the product
and documentation without prior
notice. Axis Communications AB makes
no warranty of any kind with regard to
the material contained within this
document, including, but not limited
to, the implied warranties of
merchantability and fitness for a
particular purpose. Axis
Communications AB shall not be liable
nor responsible for incidental or
consequential damages in connection
with the furnishing, performance or use
of this material. This product is only to
be used for its intended purpose.

Intellectual Property Rights

Axis AB has intellectual property rights
relating to technology embodied in the
product described in this document. In
particular, and without limitation,
these intellectual property rights may
include one or more of the patents
listed at http://www.axis.com/
patent.htm and one or more additional
patents or pending patent applications

in the US and other countries. This
product contains licensed third-party
software. See the menu item “About”
in the product’s user interface for
more information. This product
contains source code copyright Apple
Computer, Inc., under the terms of
Apple Public Source License 2.0 (see
http://www.opensource.apple.com/
apsl).
The source code is available from
http://developer.apple.com/darwin/
projects/bonjour/

Equipment Modifications

This equipment must be installed and
used in strict accordance with the
instructions given in the user
documentation. This equipment
contains no user-serviceable
components. Unauthorized equipment
changes or modifications will
invalidate all applicable regulatory
certifications and approvals.

Trademark Acknowledgments

AXIS COMMUNICATIONS, AXIS, ETRAX,
ARTPEC and VAPIX are registered
trademarks or trademark applications
of Axis AB in various jurisdictions. All
other company names and products are
trademarks or registered trademarks of
their respective companies.
Apple, Boa, Apache, Bonjour, Ethernet,
Internet Explorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW
are registered trademarks of the
respective holders. Java and all
Java-based trademarks and logos are
trademarks or registered trademarks of
Oracle and/or its affiliates. UPnPTM is a
certification mark of the UPnPTM
Implementers Corporation.
SD, SDHC and SDXC are trademarks or
registered trademarks of SD-3C, LLC in
the United States, other countries or
both. Also, miniSD, microSD, miniSDHC,

microSDHC, microSDXC are all
trademarks or registered trademarks of
SD-3C, LLC in the United States, other
countries or both.
WPA, WPA2 and Wi-Fi Protected Setup
are marks of the Wi-Fi Alliance.
Microsoft, Windows, Windows Vista,
WWW, Internet Explorer, DirectX, Intel,
Intel Core, Pentium and Xeon are
registered trademarks of the respective
holders.
Acrobat, Adobe, Apache, Debian,
Ethernet, Internet Explorer, Iomega,
LaCie, Linux, Machintosh, Microsoft,
Mozilla, MySQL, Red Hat, UNIX,
Windows, WWW, Wi-Fi are registered
trademarks of the respective holders.
Java and all Java-based trademarks and
logos are trademarks or registered
trademarks of Oracle and/or its
affiliates. UPnPTM is a certification
mark of the UPnPTM Implementers
Corporation. WPA is a mark of the Wi­Fi Alliance.

Support

Should you require any technical
assistance, please contact your Axis
reseller. If your questions cannot be
answered immediately, your reseller
will forward your queries through the
appropriate channels to ensure a rapid
response. If you are connected to the
Internet, you can:

• download user documentation and
software updates

• find answers to resolved problems in
the FAQ database.

• Search by product, category, or
phrase

• report problems to Axis support staff
by logging in to your private support
area

• chat with Axis support staff
(selected countries only)

• visit Axis Support at www.axis.com/

techsup/

Should you require any technical
assistance, please contact appropriate
channels according to your AVHS
license agreement to ensure a rapid
response.

Learn More!

Visit Axis learning center
www.axis.com/academy/ for useful
trainings, webinars, tutorials and
guides.

Electromagnetic Compatibility
(EMC)

This equipment has been designed and
tested to fulfill applicable standards
for:

• Radio frequency emission when
installed according to the
instructions and used in its intended
environment.

• Immunity to electrical and
electromagnetic phenomena when
installed according to the
instructions and used in its intended
environment.

USA - This equipment has been tested

using a shielded network cable (STP)
and found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the

interference by one or more of the

この装置は、クラスB 情報技術装置です。この装置
は、家庭環境で使用することを目 的としています
が、この装置がラジオやテレビジョン受信機に近
接して使用されると、 受信障害を引き起こすこと
があります。 取扱説明書に従って正しい取り扱い
をして下さい。 本製品は、シールドネットワーク
ケーブル (STP)を使用 して接続し てくださ い。また
適切に接地してください。

ࢇ Е ɼࢽࡈ% ࢷ࢕ળࢶଢԻ۰ ࣯Ի
ɼࢽ߾۰ یࡈଜЕ ʨࡶ ּࢶࡳԻ ଜֲ ֻҘ 
ࠇ߾۰ یࡈଟ ܹ ࢑ݡТЬ ࢶࢸ஢ ࢻѹ 673
VKLHOGHG WZLVWHG SDLU ৼࢇٴࡶ یࡈଜࠆ ࢿ૽
ࡶ ࠉʼ ଜݫݤࠝ

following measures:

• Reorient or relocate the receiving
antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.

• Consult the dealer or an experienced
radio/TV technician for help.

Using an unshielded network cable
(UTP) – -

This equipment has been
tested using an unshielded network
cable (UTP) and found to comply with
the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is
operated in a commercial
environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed
and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause
harmful interference in which case
the user will be required to correct the
interference at his own expense.

Canada - This Class B digital

apparatus complies with Canadian
ICES-003.

Europe - This digital equipment

fulfills the requirements for RF
emission according to the Class B limit
of EN 55022.
The product shall be connected using a
shielded network cable (STP) that is
properly grounded.
This product fulfills the requirements
for immunity according to EN 61000­6-1 residential, commercial and light­industrial environments. This product

fulfills the requirements for immunity
according to EN 61000-6-2 industrial
environments.
This product fulfills the requirements
for immunity according to EN 55024
office and commercial environments

Australia/ New Zealand - This

digital equipment fulfills the
requirements for RF emission
according to the Class B limit of
AS/NZS CISPR 22. The product shall be
connected using a shielded network
cable (STP) that is properly
grounded.

Japan

Korea

Safety

This product complies with IEC/EN/
UL 60950-1 Safety of Information
Technology Equipment.

Disposal and Recycling

This symbol means that the
product shall not be
disposed of together with
household or commercial waste.
Directive 2012/19/EU on waste
electrical and electronic
equipment (WEEE) is applicable in the
European Union member states. To
prevent potential harm to human
health and the environment, the
product must be disposed of in
an approved and environmentally safe
recycling process. For information

about your nearest designated
collection point, contact your local
authority responsible for waste
disposal. Businesses should contact the
product supplier for information about
how to dispose of this product
correctly. This product complies with
the requirements of Directive 2011/65/
EU on the restriction of the use of
certain hazardous substances in
electrical and electronic equipment
(RoHS).

RoHS

This product complies with the
requirements of the
legislative act Administration
on the Control of Pollution
Caused by Electronic Information
Products (ACPEIP).

Warranty

www.axis.com/warranty

AXIS F1004 Sensor Unit Installation Guide Page 7

1x1x

1x1x

Page 8 AXIS F1004 Sensor Unit Installation Guide

28

9

AXIS F1004 Sensor Unit Installation Guide Page 9

2610

1

Page 10 AXIS F1004 Sensor Unit Installation Guide