P6157W-V2
15.6” WXGA TFT Monitor
User’s Manual
Disclaimers
This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third
party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not make any
commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any time
without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Axiomtek Co., Ltd.
CAUTION
If you replace wrong batteries, it causes the danger of explosion. It is recommended by the
manufacturer that you follow the manufacturer’s instructions to only replace the same or
equivalent type of battery, and dispose of used ones.
Copyright 2017 Axiomtek Co., Ltd.
All Rights Reserved
November 2017, Version A1
Printed in Taiwan
ii
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
2. Disconnect the power cords from the P6157W-V2 Series before making any installation.
Be sure both the system and the external devices are turned OFF. Sudden surge of
power could ruin sensitive components. Make sure the P6157W-V2 Series is properly
grounded.
3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
Other brand names and trademarks are the properties and registered brands of their
respective owners.
iii
Table of Contents
Disclaimers ..................................................................................................... ii
Safety Precautions ........................................................................................ iii
Chapter 1 Introduction ................................................ 1
1.1 General Description ............................................................................ 1
1.2 Features ............................................................................................... 2
1.3 Specifications ...................................................................................... 2
1.4 Dimensions and Outlines ................................ ................................ ... 3
1.5 I/O Outlets ............................................................................................ 4
1.6 Packing List ......................................................................................... 5
Chapter 2 System Setup .............................................. 7
2.1 System Configuration ......................................................................... 7
2.2 Panel Mounting ................................................................................... 8
2.3 Wall Mounting ...................................................................................... 8
2.4 VESA Mounting ................................................................................... 9
2.5 System Jumper Setting ...................................................................... 9
Appendix A Supported Input Timing Modes ............. 11
Appendix B OSD Operation ........................................ 13
Function Description of OSD Menu ............................................................ 13
iv
P6157W-V2 User ’s Manual
Chapter 1
Introduction
This chapter contains general information and detailed specifications of the P6157W-V2.
Chapter 1 includes the following sections:
General Description
Features
Specifications
Dimensions and Outlines
I/O Outlets
Package List
1.1 General Description
The P6157W-V2, an industrial 15.6 inches view area LCD Monitor comes with slim, light and
reliable features to replace traditional bulky CRT for Industrial application. Its unique flat design
is fit for panel mounting, VESA mounting, Wall mounting and Rack mounting. The display
interface offers DVI-D, HDMI and VGA digital interfaces for different input source from PC
system or multimedia system that let you upgrade the display don’t change anything from your
system. Besides, for varied HMI field, you can choose one of resistive touch or glass interface
to meet your application. In addition, this monitor has more comfort, safety, and environmental
protection for humanized & health consideration those would be the benefit that users can get.
This LCD monitor builds in color active matrix thin-film-transistor (TFT) liquid crystal display to
provide superior display performance. A maximum resolution of 1366x1768 is ideal for
displaying complex graphics and high definition images. Other outstanding designs that
enhance this LCD monitor’s performance are Plug & Play compatibility, and OSD (On Screen
Display) controls, especially OSD, it made you ease adjustment on screen image.
Introduction 1
P6157W-V2 User’s Manual
1.2 Features
High contrast color 15.6” WXGA TFT LCD display support resolution up to 1366x768
Flat design with NEMA4/IP65-compliant
Suits with projected capacitive touch or glass
High Brightness and Ultra-wide viewing angle with anti-glare features.
Power management system conforms to VESA DPMS standard
Advanced OSD control for picture quality adjustment
Supports VESA ARMs, Desktop Stand Rear, Panel, Wall and Rack mounting
1.3 Specifications
15.6” WXGA(1366x768) LCD with LED backlight
Projected capacitive touch or glass
Front bezel design with NEMA4/IP65
Control: OSD (On Screen Display) control pad on the side
Mounting: Support Panel mount, VESA arm mount, Wall mount and Rack
mount (optional)
Net Weight
P6157W-V2: 4.5KGS
Dimension (Main Body Size)
P6157W-V2: 397mm x 247mm x 54 mm
Operation Temperature
0℃ to 55℃
Relative Humidity
20% to 90% @ 40℃, Non-Condensing
Power input
Screw-type or phoenix type power input
Max power consumption: 19W
NOTE: All specifications and images are subject to change without notice.
2 Introduction
P6157W-V2 User ’s Manual
1.4 Dimensions and Outlines
The following diagrams show the dimensions and outlines of P6157W-V2:
Introduction 3
P6157W-V2 User’s Manual
No
Function
No
Function
1
Menu (Enter function)
7
Screw type/
Phoenix type power input
2
SEL+
8
HDMI
3
SEL-
9
DVI-D
4
Exit/Auto Adjust
10
VGA
5
Power LED
11
Line-In (Max: 1V rms)
6
Power Switch
12
RS-232 or USB for Touch
1.5 I/O Outlets
Please refer to the following illustration for I/O locations of the P6157W-V2.
4 Introduction
P6157W-V2 User ’s Manual
1.6 Packing List
When you receive the P6157W-V2, the bundled package should contain the following items:
P6157W-V2 unit x 1
VGA cable x1
USB cable or RS-232 cable x1 (for resisitve touch version only )
If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.
Introduction 5
P6157W-V2 User’s Manual
This page is intentionally left blank.
6 Introduction
P6157W-V2 User ’s Manual
7
Chapter 2
System Setup
This chapter details the system parts and components with figures. Sections include:
System Configuration
Panel Mounting
Wall Mounting
VESA Mounting
Rack Mounting
2.1 System Configuration
The figure below shows the side views of P6157W-V2 series.
1. Exit:
Jump out the selection icon / Auto adjust.
2. Menu:
Press this button to turn on/off the OSD (On Screen Display) main menu.
Press this button to activate selected items.
3. SEL-:
To scroll down the menu to decrease the value of selected item.
4. SEL+:
To scrolling up the menu to increase the value of selected item.
5. Power LED:
When the light is green, the power is on, red light when stand by.
6. Power switch:
Press this button to turn on/off the monitor.
System Setup
P6157W-V2 User’s Manual
2.2 Panel Mounting
The P6157W-V2 is designed for panel mount application. To mount the P6157W-V2, the
standard set of mounting kit (included in the system packaging) is needed.
▲P6157W-V2 Panel Mount kits
2.3 Wall Mounting
The P6171 provides VESA mount and wall mount. Screw four screws to fix the kit in the back
chassis.
8 System Setup
P6157W-V2 User ’s Manual
9
Jumper
★ Default Setting
Jumper Setting
JP1
LVDS Panel Power : 3.3V (Default)
LVDS Panel Power : 5V
Short 1-2
Short 3-4
JP3
12V DC in (VINO-12V) (Default)
24V DC in (VINO-12V)
Short 1-3, Short 2-4
Short 3-5, Short 4-6
JP4
12V DC in (Default)
24V DC to 12V DC
Short 1-3, Short 2-4
Short 3-5, Short 4-6
JP5
LCD Backlight 5V
LCD Backlight 3.3V (Default)
Short 1-2
Short 2-3
JP6
LCD Enable 5V
LCD Enable 3.3V (Default)
Short 1-2
Short 2-3
2.4 VESA Mounting
The P6171 provides VESA mount at the back of system. Screw four screws to fix the kit in the
back chassis.
2.5 System Jumper Setting
System Setup
P6157W-V2 User’s Manual
This page is intentionally left blank.
10 System Setup
11
Supported Input Timing Modes
Pixel Format
Refresh
Rate
Horizontal
Frequency
Vertical
Frequency
Pixel
Frequency
Standard
Type
Note
640 * 480
60 Hz
31.5 kHz
59.94 Hz
25.175 MHz
Industry Standard
72 Hz
37.9 kHz
72.80 Hz
31.500 MHz
VESA Standard
75 Hz
37.5 kHz
75 Hz
31.500 MHz
VESA Standard
800 * 600
56 Hz
35.2 kHz
56.25 Hz
36.000 MHz
VESA Guidelines
60 Hz
37.9 kHz
60.317 Hz
40.000 MHz
VESA Guidelines
75 Hz
46.9 kHz
75 Hz
49.500 MHz
VESA Standard
1024 * 768
60 Hz
48.4kHz
60 Hz
65.000 MHz
VESA Guidelines
70 Hz
56.5 kHz
70 Hz
75.000 MHz
VESA Standard
75 Hz
60.0 kHz
75 Hz
78.75 MHz
VESA Standard
1280 * 1024
60 Hz
64.0 kHz
60.020 Hz
108.000MHz
VESA Standard
75 Hz
80.0 kHz
75.025 Hz
135.000 MHz
VESA Standard
1360 * 768
60 Hz
47.7 kHz
60.015 Hz
85.500 MHz
VESA Standard
VGA Only
1366 * 768
60 Hz
47.7 kHz
59.79 Hz
85.500 MHz
VESA Standard
DVI, HDMI
Only
1680 * 1050
60 Hz
65.3 kHz
59.954 Hz
146.250 MHz
CVT
1920 * 1080
60 Hz
67.5 kHz
60 Hz
148.500 MHz
CEA Standard
Supported Input Timing Modes
P6157W-V2 User ’s Manual
Appendix A
NOTE: Timing depends on LCD Panel’s requirement.
Supported Input Timing Modes
P6157W-V2 User’s Manual
This page is intentionally left blank.
12 Supported Input Timing Modes
P6157W-V2 User ’s Manual
OSD MENU
Description
Luminance
Luminance：
Brightness
Contrast
Sharpness
Color
Color:
Color Temperature (9300,7500,6500,user)
Red
Green
Blue.
OSD
OSD Settings：
Horizontal
Vertical
Transparency
OSD Time out .
Setup
Setup:
Language
Volume
Mute
Input
Reset
Appendix B
OSD Operation
Function Description of OSD Menu
※The layout and format of OSD depends on customer’s request.
OSD Operation 13
P6157W-V2 User’s Manual
This page is intentionally left blank.
14 OSD Operation
Loading...