AXIOMTEK IMB200 User Manual
IMB200
Intel
®
PentiumD/Pentium4/Celeron D
Industrial ATX Motherboard
User’s Manual
i
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. AXIOMTEK Co., Ltd. assumes no
responsibility for any infringements of patents or other rights of
third parties which may result from its use.
AXIOMTEK assumes no responsibility for any inaccuracies that
may be contained in this document. AXIOMTEK makes no
commitment to update or to keep current the information
contained in this manual.
AXIOMTEK reserves the right to make improvements to this
document and/or product at any time and without notice.
No part of this document may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of AXIOMTEK Co., Ltd.
i
ESD Precautions
Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
Do not remove boards or integrated circuits from their
anti-static packaging until you are ready to install them.
Before handling a board or integrated circuit, touch an
unpainted portion of the system unit chassis for a few
seconds. This helps to discharge any static electricity on
your body.
Wear a wrist-grounding strap, available from most
electronic component stores, when handling boards and
components.
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
IBM is a registered trademark of International Business
Machines Corporation.
MS-DOS, and Windows 2000 are trademarks of Microsoft
Corporation.
Award is a trademark of Award Software, Inc.
IBM, PC/AT, PS/2, VGA are trademarks of International
Business Machines Corporation.
Intel Pentium D, Pentium4, Celeron D is trademarks of Intel
Corporation.
Other brand names and trademarks are the properties and
registered brands of their respective owners.
iii
v
T a b l e o f C o n t e n t s
Disclaimers....................................................................ii
ESD Precautions...........................................................iii
Chapter 1 Introduction........................................................1
1.1 General Description .............................................1
1.2 Specifications ......................................................2
1.3 Utilities Supported................................................3
1.4 Ordering information ............................................3
1.4 Board Dimensions................................................ 5
Chapter 2 Jumpers and Connectors.................................... 6
2.1 Board Layout .......................................................6
2.2 Jumper Settings................................................... 7
2.2.1 Watchdog Tigger Mode: JP2……………………….. 7
2.2.2 Clear CMOS Setting: JP7…………………………… 8
2.2.3 CF Master/Slave Setting: JP8………………………. 8
2.2.4 CF Power Setting: JP9………………………………. 9
2.3 Connectors ........................................................ 10
Chapter 3 Installation ........................................................12
3.1 CPU Installation ....................................................12
3.2 Installing ATX Power Supply…………………………..19
3.3 Installing the Memory .............................................19
Chapter 4 Hardware Description ....................................... 21
4.2 Enhane IDE1/IDE2 connecotor-IDE1 and IDE2 ........ 21
4.3 Display interface-CN1............................................. 22
4.4 Floppy Disck Connector-FDD ..................................23
4.5 Parallel Port Connector ..........................................24
4.6 COM1 Port Connector-CN2..................................... 25
4.7 COM2/3/4 Port Connector-CN25/CN27/CN33 support
RS232
4.8 USB and Giagbit LAN RJ-45 Connector-CN6........... 26
4.9 USB and 10/100Mb LAN RJ-45 Connector-CN7.......26
4.10 USB Connector by pin header-CN30 ..................... 27
4.11 Audio Jack (Line-in/Line-Out/MIC)-CN3.................28
4.12 ATX12V CPU Power Connector: CN14..................28
i
.........................................................................25
v
4.13 Serial ATA Connectors-CN28/CN29 ......................29
4.14 PS/2 Keyboard/Mouse connector-CN4 .................. 29
4.15 Digital I/O Connector-CN38 .................................. 30
4.16 CD/IN Connector-CN9 ..........................................30
4.17 CPU/System FAN Connector-CN23/CN24 .............31
Chapter 5 Installing VGA driver......................................... 32
5.1 Introduction........................................................32
5.2 Driver Disks’ Contents........................................32
5.3 Windows 2000 VGA Driver Installation ................32
5.4 Windows XP VGA Driver Installation ................... 34
Chapter 6 Installing LAN Driver........................................ 35
6.1 Introduction........................................................35
6.3 Drivers Supported..............................................35
Chapter 7 Award BIOS Utility ...........................................36
7.2 BIOS Setup ........................................................36
7.3 Standard CMOS Setup.......................................38
7.4 Advanced BIOS Features ...................................41
7.4.1 CPU Feature…………………………………………. 41
7.4.2 Hard Disk Boot Priority……………………………… 43
7.5 Advanced Chipset Features................................ 46
7.6 Integrated Peripherals ........................................ 50
7.6.1 On-Chip IDE Device………………………………… 50
7.6.2 Onboard Device……………………………………. 52
7.6.3 Super IO Device……………………………………. 54
7.7 Power Management Setup.................................. 57
7.8 PNP/PCI Configuration .......................................60
7.9 PC Health Status ...............................................62
7.10 Frequency/Voltage Control.................................63
7.11 Load Fail-Safe Default..........................................64
7.12 Load Optimized Default ........................................64
7.13 Supervisor/User Password Setting........................64
7.14 Exit Setting...........................................................66
A p p e n d i x A Watchdog Timer....................................68
A p p e n d i x B PCI IRQ Routing.....................................69
PICMG PCI IRQ Routing................................ 69
On Board Device IRQ Routing .......................69
i
AppendixC Detailed memory Addess Mapping ................70
AppendixD I/O Shield........................................................ 71
v
IMB200 LGA775 ATX MB User Manual
Chapter 1 Introduction
1.1 General Description
The IMB200 supports LGA775-pin Intel® Pentium® D (Intel
Dual-Core) processor up to 3.6GHz with a 533/800MHz front
side bus (FSB), and features an Intel® 865G + ICH*5
chipset. With Intel dual-core processing technology, the
IMB200 provides the excellent performance to handle
multitasking and to run multiple application s
simultaneously. The IMB200 is specially suited for the
solutions which need more effective computing and
reliability, such as Digital Video Recorder/Gamine
Machine/Point of Service System/Video Server/Intelligent
Transmit System and so on.
Introduction
1
IMB200 LGA775 ATX MB User Manual
1.2 Specifications
¾ Processor: Intel® Pentium D/Pentium4/Celeron
¾ North Bridge: Intel
¾ South Bridge: Intel
¾ CPU Socket: LGA775
¾ FSB: 533/800 Mhz
¾ L2 Cache: Integrated in CPU(Depend on CPU)
¾ BIOS: Phoenix Award BIOS Rev.6.00
¾ System Memory: Support Dual Channel DDR
266/333/400 memory and the maximum capacity up to
4GB.
CPU FSB DDR Type DDR Frequency
800MHz PC3200/PC2700/PC2100 400/333*/266MHz
533MHz PC2700/PC2100 333/266MHz
*Because limited of chipset, when using FSB800Mhz CPU,
PC2700 DDR (333 MHz) only supports 320 MHz.
®
82865G
®
82801EB(ICH5)
¾ IDE Interface: Two IDE connector and up to four devices,
Ultra DMA 100 supported
¾ FDD Interface: Supports up to 2 drives
¾ Serial Ports: RS232 Portx4
¾ Parallel Ports: One parallel port with ECP/EPP/SPP
supported
¾ VGA Controller:
¾ Chipset Integrated VGA Controller and Supports up to
2048x1536 at 75 Hz resolution on non-interlaced CRT
monitors
¾ Ethernet: Intel82547GI/Intel82562ET
¾ SATA: Two Channel and support the maximum data
transfer rate could up to 150MB/s
2
Introduction
IMB200 LGA775 ATX MB User Manual
¾ CF Socket: Support CF Type II Socket
¾ USB Interface: 4 USB ports; USB Spec. Rev. 2.0
compliant.
¾ Hardware Monitoring: Winbond W83627HG-AW
detection of CPU temperature, System temperature,
Power failure and Fan speed.
¾ Watchdog Timer:
Software programmable time interval and hardware reset
Only (1~255 seconds)
¾ Dimensions:304.8mmx243.8mm
¾ PCB 4 Layer
¾ Form factor :ATX Former
¾ Environmental:
Operating temperature 0 degrees to 60 degrees(Depends on CPU)
CPU Relative Humidity 95%
NOTE: Specifications are subject to change w ithout
notice.
1.3 Utilities Supported
z Intel® 865G Utility and Drivers
z Ethernet Utility and Drivers
z VGA Drivers
z Audio Driver
1.4 Ordering information
Model number Description
IMB200VGE Intel547GI/Intel82562ET LAN
IMB200VG Intel547GI
Introduction
3
IMB200 LGA775 ATX MB User Manual
4
Introduction
IMB200 LGA775 ATX MB User Manual
5
1.4 Board Dimensions
Introduction
IMB200 LGA775 ATX MB User Manual
Chapter 2 Jumpers and Connectors
2.1 Board Layout
6 Jumpers and Connectors
IMB200 LGA775 ATX MB User Manual
2.2 Jumper Settings
Followed as below detailed description for Jumper setting
and installed the IMB200 for your application
Jumper Default Setting
JP2
JP7
JP8
JP9
Watchdog Trigger Mode :
Disable
CMOS Clear Jumper : Normal
Mode
Compact Flash Master/Slave :
Master
Compact Flash Power Select :
3.3V
OPEN
Short 1-2 for NMI
Short 2-3 for Reset
Short 1-2 for Normal
Short 2-3 for Clear
Short for Master
Open for Slave
Short 1-2 for 3.3V
Short 2-3 for 5V
2.2.1 Watchdog Trigger Mode: JP2
Options Settings
NMI
RESET
Disabled
Jumper Setting
1-2
2-3
Open (Default)
Jumpers and Connectors 7
IMB200 LGA775 ATX MB User Manual
2.2.2 Clear CMOS Setting: JP7
Options Settings
Normal
Clear CMOS
2.2.3 CF Master/Slave Setting: JP8
Options Settings
Master
Slave
1-2(Default)
2-3
Short(Default)
Open
8 Jumpers and Connectors
IMB200 LGA775 ATX MB User Manual
2.2.4 CF Power Setting: JP9
Options Settings
3.3V
5V
1-2(Default)
2-3
Jumpers and Connectors 9
IMB200 LGA775 ATX MB User Manual
2.3 Connectors
The following table lists the function of each connector on
the IMB200.
Connectors Label Connectors Label
General Output
Connector
Printer Port Connector
COM1
COM2
COM3
COM4
USB Port 1, 2 Connector
USB Port 3, 4 Connector
USB Port 5, 6 Connector
System BIOS
CRT Connector
Keyboard/Mouse
Connector
Gigabit Ethernet
Connector
Fast Ethernet Connector
Gigabit Ethernet
External Speed LED
Fast Ethernet
External Speed LED
Gigabit Ethernet Extern al
Link/ACT LED
Fast Ethernet
External Link/ACT LED
ATX12V CPU Power
Connector
CN37
CN5
CN2
CN33
CN25
CN27
CN6
CN7
CN30
U41
CN1
CN4
CN6
CN7
CN13
CN17
CN16
CN15
CN14
Primary IDE
Connector
Secondary IDE
Connector
Compact Flash
Connector
S-ATA Port 1
Connector
S-ATA Port 2
Connector
FDD Connector
IrDA Connector
CPU FAN Connector
SYSTEM FAN1
Connector
SYSTEM FAN2
Connector
Internal Buzzer
Internal Battery
Audio Jack
AUX Input
Connector
CD Input Connector
Speaker Output
Connector
184-Pin DDR
Memory Channel-A
184-Pin DDR
Memory Channel-B
ISA Slot
IDE1
IDE2
CN26
SATA
1
SATA
2
FDD
CN12
CN23
CN36
CN24
BU1
BAT1
CN3
CN8
CN9
CN10
DIMM
1/2
DIMM
3/4
ISA1/
2
10 Jumpers and Connectors
Connectors Label Connectors Label
ATX Power Connector
LGA775 CPU Socket
DIO Connector
IMB200 LGA775 ATX MB User Manual
CN31
U22
CN38
PCI Slot
AGP Slot
PCI1~
5
AGP8
X1
Jumpers and Connectors 11
IMB200 LGA775 ATX MB User Manual
Chapter 3 Installation
Before installing the processor, Please pay more attention on In tel
website and obtained more information
http://www.intel.com.
3.1 CPU Installation
The LGA775 processor socket comes with a lever to protect the
processor. Please pay more attention as below. Follow the
pictures and place the processor into CPU socket.
.
12 Installation
.
IMB200 LGA775 ATX MB User Manual
Installation 13
IMB200 LGA775 ATX MB User Manual
14 Installation
IMB200 LGA775 ATX MB User Manual
Installation 15
IMB200 LGA775 ATX MB User Manual
16 Installation
IMB200 LGA775 ATX MB User Manual
Installation 17
IMB200 LGA775 ATX MB User Manual
18 Installation
Loading...