AXIOMTEK GOT5153W-834 User Manual
GOT5153W-834
All-in-One
15.6” WXGA TFT Fanless Touch Panel
Computer with Intel® Celeron® Processor
J1900 onboard
User’s Manual
ii
Disclaimers
This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third
party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not make any
commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any time
without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Axiomtek Co., Ltd.
CAUTION
If you replace wrong batteries, it causes the danger of explosion. It is recommended by the
manufacturer that you follow the manufacturer’s instructions to only replace the same or
equivalent type of battery, and dispose of used ones.
Copyright 2014 Axiomtek Co., Ltd.
All Rights Reserved
November 2014, Version A1
Printed in Taiwan
iii
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
2. Disconnect the power cords from the GOT5153W-834 Series before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden
surge of power could ruin sensitive components. Make sure the GOT5153W-834 Series
is properly grounded.
3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
Windows® is a trademark of Microsoft Corporation.
IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
Intel® and Pentium® are trademarks of Intel Corporation.
AMI is trademark of American Megatrend Inc.
Other brand names and trademarks are the properties and registered brands of their
respective owners.
iv
Table of Contents
Disclaimers ..................................................................................................... ii
Safety Precautions ........................................................................................ iii
Chapter 1 Introduction ............................................. 1
1.1 General Description ............................................................................ 2
1.2 Specifications ...................................................................................... 3
1.3 Dimensions .......................................................................................... 5
1.4 I/O Outlets ............................................................................................ 7
1.5 Packing List ......................................................................................... 9
Chapter 2 Hardware and Installation .................... 11
2.1 CFast™ card Installation .................................................................. 12
2.2 SBC87834 Jumpers and Connectors............................................... 13
2.2.1 Jumper Settings ........................................................................................ 15
2.2.2 Connectors ................................................................................................ 16
2.3 Ethernet .............................................................................................. 26
2.4 Mountings – Wall/Desktop/VESA ..................................................... 27
2.4.1 Wall-Mounting ........................................................................................... 27
2.4.2 Desktop-Mounting ..................................................................................... 28
2.5 HDD Installation ................................................................................. 29
2.6 DRAM Installation .............................................................................. 32
2.7 Mini cards Card Installation.............................................................. 35
2.7.1 Wireless LAN Card Installation ................................................................. 35
2.7.2 mSATA Card Installation ............................................................................ 37
2.8 Power Input (Phoenix type) .............................................................. 38
Chapter 3 AMI BIOS Setup Utility .......................... 39
3.1 Navigation Keys ................................................................................ 39
3.2 Main Menu .......................................................................................... 40
3.3 Advanced Menu ................................................................................. 41
3.4 Chipset Menu ..................................................................................... 51
3.5 Security .............................................................................................. 53
3.6 Boot Menu .......................................................................................... 54
3.7 Save&Exit ........................................................................................... 55
v
Chapter 4 Drivers Installation .............................. 57
4.1 System ............................................................................................... 57
4.1.1 Win 7 ......................................................................................................... 57
4.1.2 Win 8/8.x ................................................................................................... 58
4.2 Touch Screen ..................................................................................... 58
4.2.1 Specification .............................................................................................. 58
4.2.2 Driver Installation- Windows 7/8.x ............................................................. 59
4.3 Embedded O.S. .................................................................................. 61
4.3.1 WES 7 & WE8S ......................................................................................... 61
Appendix A Watchdog Timer ................................... 63
About Watchdog Timer ................................................................................ 63
How to Use Watchdog Timer ....................................................................... 63
WDT Sample Program ................................................................................. 64
Appendix B Volume Control .................................... 67
About Volume Control ................................................................................. 67
How to Use Volume Control ........................................................................ 67
Removed Volume Control Tool ................................................................... 75
vi
This page is intentionally left blank.
GOT5153W-834 User’s Manual
Introduction 1
Chapter 1
Introduction
This chapter contains general information and detailed specifications of the GOT5153W-834.
Chapter 1 includes the following sections:
General Description
Specifications
Dimensions
I/O Outlets
Package List
GOT5153W-834 User’s Manual
2 Introduction
1.1 General Description
The GOT5153W-834 is a fan-less and compact-size touch panel computer, equipped with a
15.6” TFT LCD display, 5W flat resistive touch or project capacitive multi-touch for option and
low power consumption Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz). The
GOT5153W-834 supports Windows 7, Windows 8.x and Windows embedded OS. The panel
computer is able to install a CFast™ card or mSATA and provide two Mini card slots for
wireless module. Its excellent ID and friendly user interface make it a professional yet
easy-to-use panel computer. The GOT5153W-834 is an ideal for space-limited applications in
factory automation, machine maker operating systems, building automation, and more.
GOT5153W-834: 15.6” TFT WXGA Fanless Touch Panel Computer
Reliable and Stable Design
The GOT5153W-834 adopts a fanless cooling system and a CFast™ card, which makes
it suitable for vibration environments.
Embedded O.S. Supported
The GOT5153W-834 not only supports Windows 7 and Windows 8.x, but also supports
embedded OS,. For storage device, the GOT5153W-834 supports 2.5” SATA device and
CFast™ card or mSATA.
Industrial-grade Product Design
The GOT5153W-834 has an incredible design to be used in different industrial
environments.
The front bezel meets the IP65/NEMA4 standard.
For connecting other devices, the GOT5153W-834 also features several interfaces: USB,
Ethernet, and RS-232/422/485.
GOT5153W-834 User’s Manual
Introduction 3
1.2 Specifications
Main CPU Board
CPU
Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz) onboard.
System Memory
One 204-pin DDR3L SO-DIMM socket
Maximum memory up to 8BG
BIOS
America Megatrends BIOS
I/O System
Standard I/O
Two RSS-232/422/485
Two USB 2.0
Two USB 3.0
One VGA
Ethernet
2x RJ45 Giga Ethernet (Intel i210IT)
Audio
One Line out
Two Internal 3W speaker
Expansion
1 x Mini-card slot (w/SIM slot)
1 x Mini-card slot (supports mSATA, optional)
Storage
One CFast™ or mSATA
One 2.5” SATA HDD
Power connector
GOT5153W-834-FR-DC/GOT5153W-834-PCT-DC : 9VDC to 36VDC with phoenix
power connector or
GOT5153W-834-FR-J/GOT5153W-834-PCT-J: 12VDC w/external 60W AC Adapter
with screw type connector
GOT5153W-834 User’s Manual
4 Introduction
System Specification
15.6” WXGA(1366x768) LCD with LED backlight
Project capacitive multi-touch or 5 wired flat resistive touch
Fanless Heat Dispensing Design
Disk drive housing:
One 2.5” SATA drive
Net Weight
3.0 Kgs (6.61 lb)
Dimension (Main Body Size)
394.2 mm x 57 mm x 257.2 mm
Operation Temperature
0℃ to 45℃
Relative Humidity
10% to 90% @ 40℃, Non-Condensing
Vibration
2.0G, 5 to 500 Hz, 2.0 G random for CF ast™ card or SSD
Power input
9~36VDC with phoenix power connector or
External 60W AC Adapter
— Power Input: 100VAC to 240VAC
— Power Output: 12VDC, Max. 5A
NOTE All specifications and images are subject to change without notice.
NOTE If the operation temperature is higher than 35℃, the wide temperature
HDD is recommended to be used on the device.
NOTE If the operation temperature is higher than 45℃, the wide temperature CFast™
are recommended to be used on the device.
GOT5153W-834 User’s Manual
Introduction 5
1.3 Dimensions
This diagram shows you dimensions and outlines of the GOT5153W-834.
GOT5153W-834 User’s Manual
6 Introduction
GOT5153W-834 User’s Manual
Introduction 7
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the GOT5153W-834.
No
Function
No
Function
1
POWER SWITCH (ATX)
7
COM 1(RS-232/422/485)
2
Power Input connector (Screw)
8
COM 2(RS-232/422/485)
3
Power Input connector (Phoenix)
9
Ethernet x 2
4
Speaker
10
USB 3.0 x 2
5
USB 2.0 x 2
11
Speaker
6
VGA
12
Audio (Line-out)
GOT5153W-834 User’s Manual
8 Introduction
No
Function
No
Function
1
Power LED
orange: display off
green : display on
5
Display on/off
2
HDD LED
6
Volume -
3
Brightness -
7
Volume +
4
Brightness +
NOTE The volume control function only can be performed under the windows
operation system with AXIOMTEK volumeSYNC program.
GOT5153W-834 User’s Manual
Introduction 9
1.5 Packing List
When you receive the GOT5153W-834, the bundled package should contain the following
items:
GOT5153W-834 x 1
Driver CD x1
Screws for HDD x4
HDD mylar
Phoenix connector x1 (for GOT5153W-834)
Power Adapter & power cord (for GOT5153W-834-J)
If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.
GOT5153W-834 User’s Manual
10 Introduction
This page is intentionally left blank.
GOT5153W-834 User’s Manual
Hardware and Installation 11
Chapter 2
Hardware and Installation
The GOT5153W-834 provides rich I/O ports and flexible expansions for you to meet different
demand, for example, CFast™ card. The chapter will show you how to install the hardware. It
includes:
CFast™ Card
SBC87834 Jumpers and Connectors
Ethernet
Mounting Way
Hard disk
DRAM
Wireless LAN Card
Power Input
GOT5153W-834 User’s Manual
12 Hardware and Installation
2.1 CFast™ card Installation
The GOT5153W-834 provides one CFast slot for users to install CFast™ card. Please refer to
the following instructions for installation:
Step 1 Turn off the system, and unplug the power cord.
Step 2 Remove the cover of CFast™ socket.
Step 3 Locate the CFast™ socket, and insert the card into the socket.
GOT5153W-834 User’s Manual
Hardware and Installation 13
2.2 SBC87834 Jumpers and Connectors
Component Side
GOT5153W-834 User’s Manual
14 Hardware and Installation
Solder Side
GOT5153W-834 User’s Manual
Hardware and Installation 15
2.2.1 Jumper Settings
Making the proper jumper settings configure the SBC87834 to match the needs of your
application.
The following table shows the default jumper settings for the onboard devices.
Jumper
★ Default Setting
Jumper Setting
JP1
★ Panel backlight control PWM mode
Panel backlight control DC mode
Short 1-2
Short 3-4
JP2
Touch Controller 4,8 WIRE
★ Touch Controller 5 WIRE
Short 1-2
Short 2-3
JP4
★ LVDS Panel Power : 3.3V
LVDS Panel Power : 5V
Short 1-2
Short 2-3
JP5
Touch OFF
★ Touch ON
Short 1-2
Short 2-3
JP6
★ PCIe device
mSATA device
Short 1-2
Short 2-3
JP7
AT mode
★ ATX mode
Short 1-2
Short 2-3
JP8
★ Normal
Clear CMOS
Short 1-2
Short 2-3
JP11
COM3_5VSB
★ COM3_5V
Short 1-2
Short 2-3
JP12
★ COM1 normal mode
COM1 pin1 with power :+5V
COM1 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
JP13
★ COM2 normal mode
COM2 pin1 with power :+5V
COM2 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
JP14
★ COM3 normal mode
COM3 pin1 with power :+5V
COM3 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
JP15
★ COM4 normal mode
COM4 pin1 with power :+5V
COM4 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
GOT5153W-834 User’s Manual
16 Hardware and Installation
2.2.2 Connectors
The connectors allow the CPU Board to connect with other parts of the system. Ensure that all
connectors are in place and firmly attached. The following table lists the function of each
connector on the SBC87834.
Connectors
Label
LVDS connector
CN1
LVDS inverter connector
CN2
TOUCH connector
CN3
HDD power connector
CN4
Full size min-PCIe connector
CN5
FRONT PANEL pin header
CN6
SIM card connector
CN7
Full size min-PCIe connector
CN8
DC IN connector
CN9
Digital I/O pin header
CN10
Speaker Out & MIC IN connector
CN11
VGA connector
CN12
Audio connector
CN13
USB CONNECTOR (reserved)
CN14/CN20
Audio Lin In connector
CN15
Power lamp connector
CN16
Power button connector
CN17
Touch function enable/disable & LED indicator
connector
CN18
Panel control Keypad connector
CN19
CPU FAN
FAN1
System FAN
FAN2
USB2.0 box header
USB1
USB3.0 connector
USB2
Display Port connector
DP1
SATA connector
SATA1
RJ45 LAN connector
LAN1, LAN2
Serial Port connector
COM1,COM2
Serial Port box header
COM3,COM4
CFast connector
SCF1
GOT5153W-834 User’s Manual
Hardware and Installation 17
LVDS connector: CN1
CN1 Pin Assignment
Pin
Description
Pin
Description
1
VCC
21
GND
2
VCC
22
GND
3
VCC
23
LVDSA_DATAN0
4
VCC
24
LVDSB_DATAN2
5
VCC
25
LVDSA_DATAP0
6
VCC
26
LVDSB_DATAP2
7
DDC DATA
27
GND
8
DDC CLOCK
28
GND
9
GND
29
LVDSA_DATAN1
10
GND
30
LVDSA_DATAN3
11
LVDSB_DATAN3
31
LVDSA_DATAP1
12
LVDSB_DATAN0
32
LVDSA_DATAP3
13
LVDSB_DATAP3
33
GND
14
LVDSB_DATAP0
34
GND
15
GND
35
LVDSA_DATAN2
16
GND
36
LVDSA_CLKN
17
LVDSB_CLKN
37
LVDSA_DATAP2
18
LVDSB_DATAN1
38
LVDSA_CLKP
19
LVDSB_CLKP
39
GND
20
LVDSB_DATAP1
40
GND
GOT5153W-834 User’s Manual
18 Hardware and Installation
LVDS inverter connector: CN2
CN2 Pin Assignment
Pin
Description
Pin
Description
1
GND
5
Inverter ON-OFF
2
GND
6
+12V
3
GND
7
+12V
4
Backlight control
8
+12V
TOUCH connector: CN3
CN3 Pin Assignment
Pin
Description
1
X+
2
X- 3 Y+
4
Sense
5
X+ 6 X-
7
Y+
8
Y- 9 GND
GOT5153W-834 User’s Manual
Hardware and Installation 19
HDD power connector: CN4
CN9 Pin Assignment
Pin
Description
1
+12V
2
GND
3
GND
4
+5V
FRONT PANEL pin header: CN6
CN6 Pin Assignment
Pin
Description
Pin
Description
1
+ 5V
2
Beep
3
GND
4
BUZZER
5
GND
6
Beep 7 NC
8
+5V 9 GND
10
PWBTN
11
GND
12
RESET
13
SATA LED
14
+3.3V
GOT5153W-834 User’s Manual
20 Hardware and Installation
SIM card connector: CN7
CN7 Pin Assignment
Pin
Description
Pin
Description
1
UIM PWR
5
GND
2
UIM RST
6
UIM VPP
3
UIM CLK
7
UIM DATA
4
NC 8 NC
Power connector: CN9
CN9 Pin Assignment
Pin
Description
1
DCIN (9V -36V)
2
DCIN (9V -36V)
3
GND
4
GND
Loading...