AXIOMTEK GOT3177T-834-FR User Manual

GOT3177T-834-FR

All-in-One
17” SXGA TFT Fanless
Compact-Size
PANEL PC

User’s Manual

ii

Disclaimers

This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third
party’s rights, and any liability arising from such use.

Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not make any
commitment to update the information in this manual.

Axiomtek reserves the right to change or revise this document and/or product at any time
without notice.

No part of this document may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Axiomtek Co., Ltd.

CAUTION

If you replace wrong batteries, it causes the danger of explosion. It is recommended by the
manufacturer that you follow the manufacturer’s instructions to only replace the same or
equivalent type of battery, and dispose of used ones.

Copyright 2014 Axiomtek Co., Ltd.

All Rights Reserved
July 2014, Version A2
Printed in Taiwan

iii

Safety Precautions

Before getting started, read the following important cautions.

1. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.

2. Disconnect the power cords from the GOT3177T-834-FR Series before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden
surge of power could ruin sensitive components. Make sure the GOT3177T-834-FR
Series is properly grounded.

3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:

 Before handling a board or integrated circuit, touch an unpainted portion of the

system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.

 When handling boards and components, wear a wrist-grounding strap, available

from most electronic component stores.

Trademarks Acknowledgments

Axiomtek is a trademark of Axiomtek Co., Ltd.
Windows® is a trademark of Microsoft Corporation.

IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
Intel® and Pentium® are trademarks of Intel Corporation.

AMI is trademark of American Megatrend Inc.
Other brand names and trademarks are the properties and registered brands of their

respective owners.

iv

Table of Contents

Disclaimers ..................................................................................................... ii

Safety Precautions ........................................................................................ iii

Chapter 1 Introduction ............................................. 1

1.1 General Description ............................................................................ 1

1.2 Specifications ...................................................................................... 2

1.3 Dimensions and Outlines ................................................................... 4

1.4 I/O Outlets ............................................................................................ 6

1.5 Packing List ......................................................................................... 7

Chapter 2 Hardware and Installation ...................... 9

2.1 CFast

TM

card Installation ................................................................... 10

2.2 Open back cover ............................................................................... 11

2.3 Jumper and Switch Setting .............................................................. 12

2.3.1 Auto Power On (JP7) ................................................................................ 13

2.3.2 Restore BIOS Optimal Defaults (JP8) ....................................................... 13

2.3.3 COM port Connector ................................................................................. 13

2.4 Ethernet .............................................................................................. 14

2.5 Mountings: Panel / Wall / Desktop / VESA ...................................... 15

2.5.1 VESA-ARM/Wall-Mount ............................................................................ 15

2.5.2 Panel-mount Kit Assembly ........................................................................ 16

2.6 HDD Installation ................................................................................. 17

2.7 DRAM Installation .............................................................................. 19

2.8 Wireless LAN Card Installation ........................................................ 21

2.9 Power Input ........................................................................................ 23

Chapter 3 AMI BIOS Setup Utility .......................... 25

3.1 Navigation Keys ................................................................................ 25

3.2 Main Menu .......................................................................................... 26

3.3 Advanced Menu ................................................................................. 27

3.4 Chipset Menu ..................................................................................... 36

3.5 Security .............................................................................................. 39

3.6 Boot Menu .......................................................................................... 40

3.7 Save&Exit ........................................................................................... 41

v

Chapter 4 Drivers Installation ................................ 43

4.1 System ............................................................................................... 43

4.1.1 Win 7 ......................................................................................................... 43

4.1.2 Win 8/8.x ................................................................................................... 44

4.2 Touch Screen ..................................................................................... 44

4.2.1 Specification .............................................................................................. 44

4.2.2 Driver Installation- Windows 7/8.x ............................................................. 45

4.3 Embedded O.S. .................................................................................. 47

4.3.1 WES 7 & WE8S ......................................................................................... 47

vi

This page is intentionally left blank.

GOT3177T-834-FR User’s Manual

Introduction 1

Chapter 1

Introduction

This chapter contains general information and detailed specifications of the
GOT3177T-834-FR. Chapter 1 includes the following sections:

 General Description
 Specification
 Dimensions and outlines
 I/O Outlets
 Package List

1.1 General Description

The GOT3177T-834-FR adopts a 17-inch SXGA TFT LCD with 350-nit brightness and an
Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz) to provide excellent computing
performance and thermal resistance. This fanless platform is especially designed for
operating under heavy-duty environment including steel refinery, oil pipe, ship, machine maker
operating systems and many more. Having below abilities makes GOT3177T-834-FR surely
a most robust and cost-effective solution.

Wide Operating Temperature Range

GOT3177T-834-FR features a technology of wide operating temperature range which allows it
to work between -10°C to +50°C. It incorporates compact ID and fanless cooling system with a
low power Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz), making the platform
a power-efficient solution.

Reliable and Stable Design

The GOT3177T-834-FR adopts a fan-less cooling system, which makes it especially suitable
for vibration-heavy environments, best for the transportation, ship, and industrial machinery
markets. For high capacity storage requirement, GOT3177T-834-FR can work under 2.0G (10
~ 500Hz, random for CFast™) in operation mode with a patent of anti-vibration design. The
patent improves the system reliability and sustainability.

GOT3177T-834-FR User’s Manual

2 Introduction

WLAN Antenna Supported (optional)

GOT3177T-834-FR has 2 PCI Express Mini Card slots for optional add-on such as wireless
LAN card for 802.11 a/b/g/n connections, 3G/GPRS application, and more. These slots also
provide 3 optional fixed rotational WLAN/3G antennas for wireless network connection.

More Features

GOT3177T-834-FR utilizes one 204-pin DDR3L SODIMM system memory max. up to 8GB,
one SATA HDD and one CFast™ or mSATA. It provides over-current protection-fuse and a
full set of I/O including RS-232/422/485, USB 2.0, USB 3.0, audio (line-out), and Gigabit
Ethernet. Additionally, this slim unit supports panel mount, wall mount (optional), VESA
mount (optional) and desktop stand (optional).

1.2 Specifications

Main CPU Board

 CPU

 Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz) onboard

 System Memory

 One 204-pin DDR3L SO-DIMM socket
 Maximum memory up to 8GB

 BIOS

 America Megatrends BIOS

I/O System

 Standard I/O

 2 x RS-232/422/485
 2 x USB 2.0
 2 x USB 3.0

 Ethernet

 2 x RJ45 for Giga Ethernet (Intel i210IT)

 Audio

 1x Line-out

 Expansion

 1 x Mini-card slot (w/SIM slot)
 1 x Mini-card slot (supports mSATA, optional)

 Storage

 1 x 2.5” SATA
 1 x CFast

TM

slot or mSATA

 Power connector

 Phoenix power connector or
 Screw power connector

GOT3177T-834-FR User’s Manual

Introduction 3

System Specification

 17” SXGA(1280x1024) LCD with LED backlight
 Flat resistive touch
 Fanless Heat Dispensing Design
 IP65 front bezel
 Disk drive housing:

 One 2.5” SATA drive

 Net Weight

 4.8 Kgs

 Dimension (Main Body Size)

 389.02 x 59.9 x 330.44 mm

 Operation Temperature

 -10℃ to 50℃

 Relative Humidity

 20% to 90% @ 40℃, Non-Condensing

 System Power input

 DC power input : 9~36VDC with phoenix power connector
 AC power input : 12VDC, 60W power adapter

NOTE: All specifications and images are subject to change without notice.

If the operation temperature is higher than 40℃, the wide temperature HDD/
CFastTM are recommended to be used on the device.

If the operation temperature is higher than 45℃, the wide temperature DRAM is
recommended to be used on the device.

GOT3177T-834-FR User’s Manual

4 Introduction

1.3 Dimensions and Outlines

The following diagrams show the dimensions and outlines of GOT3177T-834-FR

GOT3177T-834-FR User’s Manual

Introduction 5

GOT3177T-834-FR User’s Manual

6 Introduction

1.4 I/O Outlets

Please refer to the following illustration for I/O locations of the GOT3177T-834-FR.

No

Function

No

Function

1

POWER SWITCH (ATX)

6

COM2 (RS-232/422/485)

2

Power Input connector (Phoenix)

7

Ethernet

3

Power Input connector (Screw)

8

USB 3.0

4

USB 2.0

9

Line-out (Audio)

5

COM1 (RS-232/422/485)

GOT3177T-834-FR User’s Manual

Introduction 7

1.5 Packing List

When you receive the GOT3177T-834-FR, the bundled package should contain the following
items:

 GOT3177T-834-FR unit x 1
 Driver CD x1
 Phoenix connector x 1
 Panel mount kit x 10
 Screws for HDD x 4

If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.

GOT3177T-834-FR User’s Manual

8 Introduction

This page is intentionally left blank.

GOT3177T-834-FR User’s Manual

Hardware and Installation 9

Chapter 2

Hardware and Installation

The GOT3177T-834-FR provides rich I/O ports and flexible expansions for you to meet
different demand, for example CF card. The chapter will show you how to install the hardware.
It includes:

 CFast™ Card
 Open Back Cover
 Jumper and Switch Setting
 Ethernet
 Mounting Method
 Hard disk
 DRAM
 Wireless LAN Card
 Power Input

GOT3177T-834-FR User’s Manual

10 Hardware and Installation

2.1 CFast

TM

card Installation

The GOT3177T-834-FR provides one CFast™slot for users to install CFast™ card. Please
refer to the following instructions for installation:

Step 1 Open the cover, unscrew 2 screws on the chassis.

Step 2 Stick the mylar on the CFastTM card bottom side.

GOT3177T-834-FR User’s Manual

Hardware and Installation 11

Step 3 Insert the CFastTM card to the CFastTM card slot, then finding the CFast

TM

cover from the system package and screw it.

2.2 Open back cover

This section tells users how to open back cover. Please follow the steps below.

Step 1 Unscrew 8 screws on the back cover. Please refer the photo below.