AXIOMTEK CAPA842, CAPA841 Quick Installation Manual

Page 1
4 9418E841010E
©Copyright 2014 Axiomtek Co., Ltd.
Version A2 October 2014
Printed in Taiwan
Side View
The basic procedures required to power on CAPA841/842: (1). Require power at minimum 2.5A. Ensure that power supply is
OFF before connecting to CAPA841/842 and that all necessary peripheral devices are plugged properly.
(2). Ensure all of the jumpers are at default settings; especially
JP10 (1-2 close).
(3). Firmly install DDR3L memory modules into connector
SSODIMM1 until fully seated.
Note: It must be DDR3L memory module.
(4). Firmly insert power to ATX1. (5). Install a momentary on/off button/switch onto CN1, pin 9 and
10. (6). Turn on the power supply. (7). Press the on/off button/switch to power on CAPA841/842
CAPA841/842 Series Quick Installation Guide
9418E841010E 1
©Copyright 2014 Axiomtek Co., Ltd.
Version A2 October 2014 Printed in Taiwan
Checklist
CPU Board x1  Product Information CD x1 USB Cable x1 Quick Installation Guide x1 Audio Cable x1
COM Port Cable with Bracket,
P=2.0mm x1
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Jumper Settings
Before applying power to the CAPA841/842, please make sure all of the jumpers are in factory default positi on s.
Jumper Description Setting
JP1
LVDS +3.3V/+5V Voltage Selection Default: +3.3V
1-2 Close
JP2
Audio Output Selection Default: Line-out
1-3, 2-4 Close
JP3
LVDS Brightness Control Mode Setting Default: PWM Mode
1-2 Close
JP4
Restore BIOS Optimal Defaults Default: Normal Operation
1-2 Close
JP6
LVDS +12V Voltage Selection Default: None
None
CN11 Pin 11: DCD 3-5 Close
JP7
COM4 Data/Power Selection Default: RS-232 Data
CN11 Pin 18: RI 4-6 Close CN11 Pin 1: DCD 3-5 Close
JP8
COM3 Data/Power Selection Default: RS-232 Data
CN11 Pin 8: RI 4-6 Close
JP10
Auto Power On Default: Disable
1-2 Close
COM2 Pin 1: DCD 3-5 Close
JP11
COM2 Data/Power Selection Default: RS-232 Data
COM2 Pin 8: RI 4-6 Close COM1 Pin 1: DCD 3-5 Close
JP12
COM1 Data/Power Selection Default: RS-232 Data
COM1 Pin 9: RI 4-6 Close
CAPA841/842 Intel
®
Processors Capa Board
Page 2
2 9418E841010E
©Copyright 2014 Axiomtek Co., Ltd.
Version A2 October 2014
Printed in Taiwan
Connectors
Connector Description
CN1 Front Panel Connector CN2 Inverter Connector CN3 LVDS Connector CN4 Audio Connector CN5 Digital I/O Port Connector CN7 Fan Connector CN8 SMBus Connector CN9 USB Wafer Port 2 and 3 CN10 HDMI Connector CN11 COM3 and COM4 Connector CN12 SATA Power Connector CN14 VGA Connector ATX1 Power Connector SATA1 SATA Connector USB1 USB Port 0 and 1 SCFAST1 CFastTM Socket LAN1~2 Ethernet Port 1~Port 2 COM1 COM1 Connector COM2 COM2 Connector BAT1 CMOS Battery Connector SCN1 Half-size PCI-Express Mini Card Connector SCN2 Full-size PCI-Express Mini Card Connector SCN3 SIM Card Slot SSODIMM1 DDR3L SO-DIMM Connector
Note: Please refer to the CAPA841/842 series product information CD for the
complete user’s manual, drivers and utilities. User’s manual and related documents are in Acrobat PDF format.
9418E841010E 3
©Copyright 2014 Axiomtek Co., Ltd.
Version A2 October 2014 Printed in Taiwan
Board Layout
Top View
Bottom View
Loading...