Axiom Audio EP175, EP125 User Manual

EP125 & EP175

Quick Setup Guide

Epicenter

WELCOME

Every member of our Axiom team, myself included, is pleased that you have decided
on one of our products. We have all worked hard to bring the highest level of
satisfaction to your audio experiences, and will continue to work hard to make
every Axiom purchase a wise audio investment for you.

Axiom is deeply committed to ongoing audio research that continues to enhance the
performance of our products. We design and engineer all of our loudspeakers based
on the world-class psycho-acoustical research that was conducted at the National
Research Council and that I have been an integral part of since its early years. This
research changed the way that sound is measured, and allows Axiom to provide the
world’s most realistic-sounding loudspeakers at amazing value to the consumer. By
emphasizing the practical side of our ongoing research, Axiom continues to extend
people’s expectations of performance.

It is our central goal at Axiom to turn this research into a truly exciting experience
for you in your environment. Our commitment to the delivery of the most accurate
sound reproduction is a commitment to heighten the level of enjoyment you receive
from music and movies.

We at Axiom see our customers as family members and as such we stand at the ready
to deliver personal, expert advice and to follow up on any of your audio needs.

Sincerely,
Ian Colquhoun
President, Axiom

The M22ti being tested in the anechoic chamber
at the National Research Center.

FOOT INSTALLATION

Install the four rubber feet with the supplied screws or install the
spiked feet, tightening securely in the inserts provided at the bottom
of the speaker.

SUBWOOFER ACCESSORIES

BALANCED CABLE

Rugged balanced cable with gold-plated standard XLR
multi-pin male connector on one end, and female on the
other. Integrated with standard trigger line for remote

power on/off actuation of power ampliers, preamps and

other remote components. For use with A/V gear with
compatible balanced XLR connectors, including the EP500
and EP600 Epicenter Subwoofers. Trigger line connection
optional. Use only for balanced system interconnection.

SUBWOOFER COAXIAL
CABLE

Rugged coaxial audio connector for low-loss connection
between A/V receiver line-level subwoofer (Low
Frequency Effects) output jack to subwoofer line-level
input.

RCA male jacks at both ends.

All accessories can be purchased at www.axiomaudio.com