Axiom T80, T60 Owner's Manual
Location: / Positionnement:
is is by far the most important step before we even begin the installation.
Separate the le and right speakers by about 5 to 10 feet, or roughly half the
listening distance. Avoid corner locations if possible.
e Axiom T60/T80 Speakers are designed to be installed in the custom
cabinets and will not t in conventional walls
+++
Step-by-step instructions on conguring your in-wall speakers.
Instructions, étape par étape, pour la mise en fonction de vos enceintes “encastrées - en surface”
T80 & T60 In-Wall Speakers
Owners Manual
e Axiom Warranty
All our speaker models; towers, bookshelves, surrounds, centers, subwoofers and
all our ampliers; subwoofer and multichannel ampliers are warrantied against
manufacturer’s defects for 5 years.
AXIOM CANADA INC. warrants this audio loudspeaker system (the “Product”)
to be free from original manufacturing defects in materials and workmanship for
ve years from date of purchase from an authorized Axiom dealer. This warranty
extends only to the original consumer purchaser. AXIOM CANADA INC. does
not warrant goods used in commercial or industrial applications. This warranty
does not cover any expenses incurred in any removal or re-installation of the
product.
If the product should prove so defective within the warranty period, return the
product by prepaid delivery to AXIOM CANADA INC., along with the original
sales invoice or other proof of purchase, which establishes eligibility for warranty
service. AXIOM CANADA INC. will, at its option, replace or repair the product
free of charge and return the product by prepaid delivery. This warranty does not
apply to any product, which has been damaged, misused, altered or repaired by
anyone other than an AXIOM CANADA INC. authorized service facility.
Any implied warranties including tness for use and merchantability are limited
in duration to the period of the express warranties set forth above, and no person
is authorized to assume for Axiom Canada Inc. any other liability in connection
with the sale of the product. Axiom Canada Inc. expressly disclaims liability for
any incidental and consequential damages caused by the product. The remedies
provided under this warranty are exclusive and in lieu of all others.
This warranty gives specic legal rights. In addition, there may be other legal
rights arising from the sale of the product, which vary from province to province
or state to state. Some provinces / states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may
not apply in some areas.
Product Links:
http://axiomaudio.com/t80.html
Puissance maximale admissible :
Puissance minimale :
Réponse en freq. +/- 3dB :
Réponse en freq. + 3dB/- 9dB :
Impédance :
Sensibilité en salle 1w/1m :
Sensibilité Anéchoïque 1w/1m :
Filtre :
Transducteur d’aigu :
Transducteur de médium :
Transducteur de grave :
Dimensions en saillie HLP mm :
Dimensions encastrées HLP mm:
Dimensions en saillie HLP inches :
Dimensions encastrées HLP :
Poids en Kilo chacun :
Poids en lb chacun :
Max Rec. Amp Power:
Min Amp Power:
Response +/- 3dB:
Response + 3dB/- 9dB:
Impedance:
SPL In Room 1w/1m:
SPL Anechoic 1w/1m:
X-Over:
Tweeter:
Midrange:
Woofer:
On-wall Dimensions HWD mm:
In-wall Dimensions HWD mm:
On-wall Dimensions HWD inches:
In-wall Dimensions HWD inches:
Weight kg each:
Weight lbs each:
400 Watts
10 Watts
34–22 kHz
25–22 kHz
4 Ohms
95 dB
91 dB
160 Hz / 2.3 kHz
Dual 1”
Dual 5¼”
Dual 6.5”
1011.24 x 219.08 x 12.7
997. x 197. x 445.
39.81” x 8.63” x 0.5”
39.25” x 7.75” x 17.5”
25.76 kg
56.8 lbs
Modèle :
250 Watts
10 Watts
37–22 kHz
27–22 kHz
8 Ohms
93 dB
89 dB
200 Hz / 2 kHz
Single 1”
Single 5¼”
Dual 6.5”
1011.24 x 219.08 x 12.7
997. x 197. x 375.
39.81” x 8.63” x 0.5”
39.25” x 7.75” x 14.75”
21.6 kg
47.6 lbs
T80 :
T60 : Model :
Requirements for painting: painters tape, paint and paint brush.
Keep painters tape within the
recommended dimensions.
Apply paint to edge with paint
brush. When dry remove tape.
2.
3.
180.50 mm
7. 1/8 in
977.7 mm
38. 1/2 in
Step 2 / Étape 2:
Step 3 / Étape 3:
Step 4 / Étape 4:
Using the supplied template and a level (not included) mark
an outline of the wall cutout to place the T60/T80 Speakers.
en carefully cut the selected area using a jigsaw or handsaw.
Warning: Make sure there aren’t any other wires, pipes, or
other xtures that might be in the wall before cutting.
+++
À l’aide du gabarit inclus et d’un niveau (non-inclus) tracez sur
le mur le contour de l’emplacement du haut-parleur de modèle
“T”. Par la suite, découpez l’endroit marqué à l’aide d’une scie
sauteuse ou à gypse.
Avertissement: Assurez-vous qu’il n’y ait pas de ls, tuyaux ou
autres accessoires qui sont à l’intérieur du mur avant de couper
ce dernier.
If your speaker wire is not already installed in the wall you will
need to run it down inside your wall to your baseboard and
then around the room to your amplier or receiver.
+++
Si votre l de haut-parleur n’est pas déjà installé à l’intérieur
du mur; il faudra le descendre à l’intérieur du mur jusqu’à la
plinthe et de là, autour de la pièce jusqu’à votre amplicateur ou
récepteur Audio/Vidéo.
Insert the speaker wire into the hole in the binding posts of
the T60/T80 Speaker, keeping the red and black (positive and
negative) connections consistent. Use the supplied wrench to
tighten down each nut to hold the wires in place.
+++
Insérez le l d’haut-parleur à l’intérieur de l’orice du bornier
du haut-parleur de modèle “T” en prenant bien soin de respecter
l’uniformité de la polarité rouge et noir (positif et négatif). À
l’aide de la clé fournie, serrez chaque écrou pour immobiliser les
ls en place.
Slide the speaker into the wall cutout.
+++
If you have any further questions or concerns please contact
one of our audio experts. 1-866-244-8796
+++
En cas de doute ou pour d’autres questions, s’il-vous-plaît,
contactez un de nos conseillers Audio au 1-888-249-9143.
Step 1 / Étape 1:
Apply painters tape along painted
edge keeping off the raw material.
1.
Loading...