Axiom SW215P User Manual
USER MANUAL
SW215P
passive subwoofer
KEY FEATURES
• Very High Output • Manifolded Transmission Line confi gura on for very fast transient response
• Compact size for a very good output-to-weight ra o
INTRODUCTION
The SW215P subwoofer is designed to deliver high quality low frequency reproduc on where very
high output is a key requirement, together with well defi ned deep bass response and fast transient
response. Its compact size and light weight make it suitable for several diff erent uses, ranging from
touring applica ons to fi xed installa ons and high-level dance clubs.
The SW215P is a very high quality powered subwoofer system featuring some of the most
advanced technologies for low frequency reproduc on. Its unique and innova ve design is based
on a confi gura on that can be defi ned as Manifolded Transmission Line.
It uses manifolding of the front side of the cones to maximize the mutual coupling between the
two drivers, while loading the back of the cone with a large-size transmission line that has the
func on to create a transmission path from the back of the transducers to the front.
The SW215P subwoofer system is equipped with two high power 15” (380mm) transducers
capable of long excursion (up to 33mm peak-to-peak), controlled by high s ff ness Double Silicon
Spider as centering suspension and by heavy duty surround. The motor structure features high
strength (BL²/Re) with op mized symmetry and excursion controlled by Aluminium Demodula ng
Ring. The robust copper 75mm (3”) voice coil is wounded in two diff erent layers both outside and
inside the coil support, then doubling the coil surface exposed to air cooling and consequently
improving the long term thermal capacity of the loudspeaker. Cones are made of very high-s ff ness
reinforced paper, featuring also invisible water repellent treatment.
TECHNICAL SPECIFICATION
AcousƟ cal Connectors
System type Manifolded Band Pass Connector Type Neutrik® Speakon® NL4 x 2
Transducer
Two 15” (380 mm), 3” (75 mm) VC,
High s ff ness water repellent reinforced cone,
Flux Demodula ng Ring VC,
Double Centering Spider Suspension
Input Wiring LF1 = Pin 1+/-; LF2 = Pin 2+/-)
Mechanical
Width 571 mm (22.48”)
Height 800 mm (31.50”)
Depth 582 mm (22.91”)
Frequency response (±3 dB) 39 Hz – 120 Hz (Processed) Depth Including Wheels 710 mm (27.95”)
Frequency range (±10 dB) 35 Hz – 300 Hz (Unprocessed) Construc on 15 mm, reinforced Phenolic Birch
Sensi vity (1.41V @ 1m, 2Pi) 102dB (averaged from 40 to 100Hz) Paint High resistance, water based paint
Maximum Peak SPL @ 1m 139 dB Wheels 4 heavy-load 100 mm ø
Electrical Transport 4 handles
Nominal Impedance 8 Ω + 8 Ω Net Weight 61 Kg (134.5 lb)
Minimum Impedance 6.1 Ω + 6.1 Ω @ 41Hz
Power Handling Con nuous* 700 W + 700 W
Power Handling Program 900 W + 900 W
Power Handling Peak 2100 W + 2100 W
Power Compression
@ -10 dB Power (180 W + 180 W) = 0.8 dB
@ -3 dB Power (900 W + 900 W) = 1.5 dB
@ 0 dB Power (1800 W + 1800 W) = 2.7 dB
* AES Pink Noise Power
revision 2014-12-5
MECHANICAL DRAWING
OPTIONAL ACCESSORIES
NL4FX Neutrik Speakon® PLUG
PC260 2 in 6 out digital loudspeaker processor
USB2CAN PRONET network converter
RAINCOV215 Rain cover for input sockets
DHSS10M20 Sub-Speaker ø35mm Pole with M20 screw
see hƩ p://www.axiomproaudio.com/ for detailed descripƟ on and other available accessories.
SPARE PARTS
AC103GS 100 mm Swivel castor without brake
AC115DN Black steel handle
98AXM215SW8 15’’ woofer - 3” VC - 8 ohm
NL4MP Neutrik Speakon® panel socket
80 cm
31.50"
57.1 cm
22.48"
58.2 cm
22.91"
71.0 cm
27.95"
P = M20 insert for DHSS10M20
pole adaptor for convenƟonal
SUB-SAT system.
P
Loading...