Axiom FMS 16, FMS 24 Quick Setup Sheet

FMS 16/24

Quick Setup Sheet

Full Metal Stand

FMS 16 / 24 Quick Setup Sheet

Visit www.axiomaudio.com/manual_index.html for full owners manual

Step 1:

Choose either the spike feet or the rubber feet and attach
those on the base. Spikes or feet make absolutely no
difference in sound quality. They are supplied for your

convenience or stability only.

Step 2:

Locate the round center pillar with the threaded end
and screw the threaded end carefully into the triangular
metal pedestal base, rotating the pillar in a clockwise
direction. Tighten as snugly as you can.

Collar Set Screw

Step 3

Collar

Step 4:

Now you can run the speaker cable through
the center pillar and out the top notch to
connect to the speaker later on.

Step 4

Speaker Wire

Step 2

Pillar

Pedestal Base

Rubber Foot x 3

Step 1

Step 3:

Now place the collar on top of the pillar and
temporarily tighten one of the set screws.

Spike x 3

Step 1

Step 5

Platform To
Collar Screws

Metal Lips

Step 5:

Attach the platform to the top of the metal collar
(ensure that the metal lips of the plate face
upward) using the three supplied screws.