Axiom EHP2 User Manual
EHP2 Secure Drive
USERS MANUAL
This manual will guide you through the steps needed in order to setup your Axiom EHP2 encrypted
security USB ash drive.
The rst time you plug the drive in, the autorun feature will prompt you to run the EHP2
software. Double click it to get started. The
startup screen will appear for 2 seconds. Then
the software will direct you to the Password
Setup screen.
Password
Re-enter Password
Password Hint
* set a hint to help you remember your password
© Axiom Memory Solutions. Specifications subject to change without notice.
WWW.AXIOMMEMORY.COMWWW.AXIOMMEMORY.COM
Once in the Password Setup screen you will
need to create your password & re-enter your
password to conrm it. A password hint is
recommended so you don’t forget your
password. If the password is forgotten or lost
the drive will be unusable since there is no
recovery method and no way to re-set the
partition without the password.
After setting up your password you will be
taken to the Partition Setup screen.
P. 1
EHP2 Secure Drive
USERS MANUAL
Once your Password is set you will be taken to
the Partition Setup screen. Here is where you
select the percentage of the drive you wish to
be “Private”(encrypted) and percentage that
will remain “Public” (non-encrypted. You can
adjust the percentage by using the up and
down buttons or simply just type the percentage into the box.
Once you have selected the partition percentage click Format.
A warning will appear to notify you that partitioning will erase the entire contents of the
drive so make sure you have created backups
of you data before clicking yes.
After clicking yes you will see a progress bar to
notify you of the status of the formatting and
you will be notied that the format is complete.
Once the formatting is completed, you will
need to unplug and re-plug the drive in for the
drive to function properly.
© Axiom Memory Solutions. Specifications subject to change without notice.
WWW.AXIOMMEMORY.COMWWW.AXIOMMEMORY.COM
P. 2
Loading...