Axial Racing AX90031 User Manual

COVER

4

2

4

3

Put the battery in the car.

1.

Make sure charger is correct for battery type selected for use. Examples: Do NOT charge Lipo batteries with Nickel Metal Hydride charger. Do NOT charge Nickel Cadmium batteries Lipo charger.

Stellen Sie sicher, Ladegerät ist korrekt für Batterietyp zur Verwendung ausgewählt. Beispiele: Laden Sie keine Lipo-Akkus mit Nickel-Metall-Hydrid-Ladegerät. Laden Sie keine Nickel-Cadmium-Akkus Lipo Ladegerät.

Assurez-vous que le chargeur est correcte pour le type de batterie sélectionné à l'emploi. Exemples: Ne pas charger les batteries Lipo avec chargeur hydrure métallique de nickel. Ne chargez pas les batteries au nickel-cadmium Lipo chargeur.

Install the battery.

2.

Turn on the transmitter.

3.

Turn on the electronic speed controller.

4.

OFF

Connect rmly.

ON

4

Getting-Started Checklist

The following checklist is a guide for getting your vehicle running for the first time.

Read ‘Cautions’ in Manual. (Page 2)

Familiarize yourself with vehicle and its components.

Even though the vehicle is new check driveshaft setscrews and other screws to make sure they are tight from the factory.

Charge battery pack. (Page 4)

Install 4X AA batteries into Transmitter. (Page 7)

If you are using NiMH or NiCd batteries turn OFF Lipo cut-off on the ESC. (Page 6 'Notes')

Install battery pack in vehicle. (Page 4)

Turn on transmitter FIRST then ESC. (Page 4)

Check to make sure steering and throttle operation work correctly. (Page 7)

Range check radio system. (Below)

Drive vehicle, challenge yourself and have fun!

Maintain vehicle. (Below)

Range-Checking Your Radio System

The radio system should be checked before operating the vehicle to ensure it’s operating properly and has adequate range.

1. Turn on the transmitter first and then the vehicle.

2. Have a friend hold the vehicle while keeping hands and loose clothing away from moving parts.

3. Walk away until you are at the farthest distance you plan to operate the vehicle.

4. Steer the vehicle back and forth and throttle both forward and reverse making sure there is no erratic behavior.

5. If any erratic behavior is exhibited do not operate the vehicle, call customer service for further assistance.

Maintaining Your Vehicle

Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak running performance. Preventative

maintenance will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain

your vehicle.

• Replace any noticeable bent or broken parts.

• Keep the chassis free of dirt and debris.

• Check for loose screws on chassis especially the knuckle, c-hub, and axle lockout screws.

• Check for wear on the ball joints in the steering and suspension links, replace if necessary.

• Check driveshaft set screws and re-thread lock if necessary.

• Check wheel nuts making sure they’re snug.

• Check tires making sure the beads are still firmly bonded to the entire circumference of the rim.

• Replace transmitter AA’s if the green light is blinking.

• Inspect the spur and pinion gears for damage.

• Check slipper clutch, if applicable, for proper operation. (See page 25 Step 23 for Setup Instruction)

• Check driveline for smooth bind-free operation.

• Check for any loose connections or frayed wiring.

• Check steering operation for any binds.

• Inspect shock absorbers for smooth dampened operation.

• Check receiver antenna to confirm it’s not damaged.

5

AXIAL LIMITED WARRANTY

Your Axial product is warranted to be free of defects in materials and workmanship when new in the factory sealed box. This warranty does not cover

damages due to normal wear and tear, users' failure to perform routine maintenance, error of assembly or installation, modifications or addition of

aftermarket parts or option parts. This warranty lasts as long as the original purchaser owns the product and is not transferable (verified by dated

itemized sales receipt accompanied with product). In the event of a defect under this warranty, Axial will, at our discretion, repair or replace the

product, provided our inspection indicates that an original defect exists. Axial provides a 10-day warranty from the date of purchase on electronics

(i.e. servo, esc, radio). Axial reserves the right to replace any product which is no longer available with a product of comparable value and function. If

Axial determines the repair is not covered under warranty guidelines, there could be a charge applied for the repair and return shipping charges. Note:

Purchasing products from unauthorized distributors may void warranty and prevent support and service.

INTERNATIONAL CUSTOMER WARRANTY

Please return product to the dealer where the purchase was made. If your Axial product purchase was made through an on-line retailer, any

warranty issues must be taken care of by that retailer. Axial assumes no responsibility for Axial products sold internationally by on-line retailers.

REPAIR

For warranty repair, please contact Axial Customer Service at (877) 64-AXIAL (877-642-9425).

HOURS AVAILABLE:

8:00 am - 5:00 pm Monday through Friday, Central Time.

If you're using NiMH or NiCd batteries turn " OFF " LiPo Cut- Off by visiting the following link for Manually Programming the AE- 2 ESC :

http: //www. axialracing. com/instructions .

You can also use the Castle Link to access LiPo Cut- Off and other advanced settings in the ESC .

6

BIND

ST-TRIM TH-TRIM ST-D/R

(877) 64-AXIAL (877-642-9425)

7

8

AX80084

UV Joint Driveshafts

x2

AX80078

Transmission Gear Cover

x1

AX80070

Axial Di Cover

x2

AX80035

10mm Shock Caps Set

x2

AX80006

Servo Set

AX80128

Wheel Hub Adapters

x1

AX80071

Straight Axle Adapter Rear

AX80072

Oset Axle 4 link mount

x1

x4

9

AX80088

Rock Buggy Main Frame

x1

AX80087

Rock Buggy Main Frame

x1

AX80083

Rock Buggy Links Set

x2

AX80077

Rock Buggy Front End 1

x1

AX80075

Wraith Tube Frame TOP

x1

AX80037

Interior Details Parts Tree - Black

AX80069

x2

Oset Axle Housing

x2

10

AX80010

Gear Set

x1

AX80033

10mm Shock Set 1

AX30665

Spurs 48DP 80T

AX80018

Hardware Parts Tree

x2

AX80062

XR10 C Hub Carrier Set

x1

AX80036

72-103mm Shock Body

x2

AX80034

10mm Shock Set 2

x2

AX30419

Solid Axle Dogbone 7x69mm

AX30419

Solid Axle Dogbone 7x125mm

AX30776

Straight Axle Shaft 6x104.2mm

AX30776

Straight Axle Shaft 6x160.2mm

x1

AX80051

Dig Transmission Case

x1

11

AX30155

Shock Shaft 3x59.5

AX80061

Steering Knuckles Plastic Set

x4

x1

AX80090

Corbeau LG1 Seat(Black)

x2

AX80079

Rock Buggy Skid Plate/Battery Tray

x1

AX80081

Radio Case

x1

AX80076

Rock Buggy Battery Brace

x2

AX80074

Rock Buggy Main Frame

x1

AX80089

Rock Buggy Front End 2

x1

AX80076

Rock Buggy Rear Brace Set

AX80073

Oset Axle Steering Link

x1

12

AX30162

Pin 1.5x8mm

x2

AX30113

Rubber Bump Stop 3.6x7x4

x4

AX30163

Pin 2x10mm

AX30166

Pin 1.5x11mm

AXA0175

Screw Shaft M3x2.5x11mm

AXA187

Set Screw M3x20mm

AX30463

Universal Joint Axle Pin holder

AXA180

M3x3mm

x6

x4

x10

x4

AX30413

Slipper spring

AX30112

Shock Diaphragm 13x4.5mm

AX30784

Drive Shaft Coupler

x1

x4

AX30437

Dig Lockout Shaft

AX30368

x4

Axle 6x39mm

AX30500

Heavy Duty Locker

x2

x1

x2

AX30410

Inner Slipper Plate

AX30411

Outer Slipper Plate

x1

AX30450

Flange Pipe 3x4.5x5.5

AX30392

13T Bevel Gear

AX30394

20T Drive Gear

AX30578

Pinion 48DP 20T

x1

x2

x1

x4

AX30784

Drive Shaft Output

AX30190

Shaft 5x18

AX30408

Input Shaft 5x29mm

x1

x4

AX30435

Steel Outdrive Shaft

x2

x1

AX30385

Di Gasket 16x25x0.5mm

AX30198

Slipper Drive gear Shaft 5x53.5

x2

AX30392

38T Bevel Gear

x1

x2

AXA1393

E2.5 e-clip

x2

AX30777

56x17mm Servo Plate

x1

AX30491

AX10 Scorpion Motor Plate

x1

AX30224

Axial Spring 14X70mm 1.43lbs/in Purple (2)

x4

13

AXA1040

M3 Thin Hex Nut

AXA1041

M2.5 Nylon Lock Nut

AXA1052

M3 Thin Nylon Locking Hex Nut

x2

x4

x18

AXA1356

Silicone Shock Bushing 7.5x8mm

AXA1046

M4 Serrated Nylon Locking Nut (Blue)

x4

x5

AXA0414

M2.6x10mm

AXA0416

M2.6x18mm

x6

x2

AXA1053

M3 Nylon Locking Hex Nut

AXA1069

Washer 2.7x6.7x0.5 mm

AXA1070

Washer 3x6x0.5 mm

AXA1071

Washer 4x8x0.5mm

AXA1091

Washer 5x10x0.5mm

AXA1184

O-Ring 7.5x1.5mm

AXA1202

O-Ring 3.5x2mm

AXA1218

Bearing 5x10x4mm

x3

x8

x6

x1

x4

AXA013

M2x6mm

AXA015

M2x10mm

AXA0023

M2.6X8mm

AXA083

M3x6mm

AXA087

M3x16mm

AXA089

M3x25mm

x9

x16

x24

x5

x8

x3

AXA463

M3x6mm

AXA464

M3x8mm

AXA465

M3x10mm

AXA466

M3x12mm

AXA0422

M2.6x6mm

AXA433

M3x6mm

x2

x4

x6

x15

x8

AXA091

x4

M3x30mm

x2

AXA434

M3x8mm

x2

AXA1221

Bearing 5x11x4mm

AXA1230

Bearing 10x15x4mm

AXA1225

Bearing 8x16x5mm

AXA1243

Bearing 15x21x4mm

AXA0109

M3x10mm Servo Flange Screw

x11

AXA0113

M3x6mm

AXA115

M3x10mm

x5

x4

AXA435

M3x10mm

AXA436

M3x12mm

x36

x7

x6

AXA117

M3x15mm

x1

x4

AXA118

M3x18mm

AXA144

M3x8mm

AXA0412

M2.6x6mm

AXA0413

M2.6x8mm

x3

x8

x4

x3

x4

AXA0437

M3x15mm

AXA438

M3x18mm

AXA0439

M3x20mm

AXA440

M3x25mm

AXA441

M3x30mm

x9

x46

x4

x2

14

AXA015

M2x10mm

1

x8

AXA015

AXA1230

Bearing 10x15x4mm

AX30385

Di Gasket 16x25x0.5mm

AX30500

Heavy Duty Locker

x2

x4

AXA1230

AXA30392

x2

AX30385

AX30500

AX30392

38T Bevel Gear

AX30408

Input Shaft 5x29mm

AX30392

13T Bevel Gear

AX30163

PIN 2.0x10mm

AXA1393

E2.5 e-clip

x2

AX30392

AX30163

AXA1393

AX80002

AXA1230

AX30395-38T/13T AX30401-36T/14T AX30402-43T/13T

AX30408

15

AXA1221

Bearing 5x11x4mm

x4

2

AXA435

FRONT

AXA435

M3x10mm

AXA015

M2x10mm

x8

AX80070

2

Note Direction

AXA1221

AX80069

AXA1221

REAR

Note Direction

AX80070

AXA015

Note Direction

3

16

Axial Racing AX90031 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual