Axial Racing AX24251 User Manual

AX24251 Axial NVS - Night Visions System

Auxiliary Power

on/off switch

Auxiliary

Lights

Auxiliary Light

White /Gr ey W ire s

5mmx5 pcs

Main Power

on/off switch

Reversing

Switches

R/L Lig ht

Orang e/G re y Wir es

3mmx4 pcs

Throttle/steering

connect to receiver

Brake Light

Red/B lac k Wi res

5mmx2 pcs

Throttle/steering

connect to ESC/servo

Main Power Supply
Connect to battery

Head Light

White /Gr ey W ire s

5mmx2 pcs

Axial Night Visions System (NVS) Installation and Setup:

1.Install LED light strings inside body/chassis using aluminum tape (not included).

• White for headlights and auxiliary lights

• Red for taillights

• Orange for blinkers

2. Pay close attention to the color of the LED wires, they denote the colors of the LED

• White LED - Black and white wires

• Red LED - Red and black wires

• Orange LED – Orange and grey wires

3. Route all wires so they do not interfere with any moving parts before connecting the

NVS system to a power source.

4. Mount the NVS control box in an area that is well ventilated and isolated from

vibration and shock.

5. Connect the ESC/ steering servo connectors to the NVS control box

6. Connect the throttle/steering connectors from the NVS control box to the receiver.

7. Connect the main power supply to the main power supply on your ESC

8. Pay close attention to the polarity on this step as reversing the polarity will cause

damage to the NVS control box and LED strings

9. Connect your power system and turn the NVS system on.

10. The NVS system requires setup each time it is powered on or off, to setup turn the

transmitter wheel to the right, then left and test the forward and reverse.

11. If you notice that the lights are not in the correct sequence you can adjust using

the reversing switches.

12. If the auxiliary lights are not working click the auxiliary power button once

Note

The string of five (5) white LED’s can only be used in an auxiliary light connector.

AX24251-I001