Axial Racing AX0331 User Manual
RR Series Nitro Engines
AX0331-I001
Your Axial product is warranted to be free of defects in materials and workmanship when new. This warranty
does not cover damages due to normal wear and tear, user's failure to perform routine maintenance, user
error of assembly or installation, user modifications, addition of aftermarket parts or option parts. This
warranty lasts as long as the original purchaser owns the product, and is not transferable (verified by dated
itemized sales receipt, accompanied with product). In the event of a defect under this warranty, Axial will, at
our discretion, repair or replace the product, provided our inspection indicates that an original defect exists.
Axial reserves the right to replace any product which is no longer available with a product of comparable
value and function. If Axial determines the repair is not covered under warranty guidelines, there could be a
charge applied for the repair and return shipping charges.
If you do have a warranty claim, please contact Axial for a Return Merchandise Authorization (RMA) number.
Any product returned without a RMA will be refused. Axial will inspect and determine if the engine is under
warranty. If it is found under warranty, Axial will repair and return the engine. If it is found not under
warranty, Axial will contact the customer to get authorization to complete the repair. Items found not under
warranty will be charged for parts and labor. Payment authorization must be made prior to repairs are being
completed.
To obtain a RMA number, please contact Axial at 949-600-8642 x 403 or service@axialracing.com.
The engine must be returned complete with crankshaft, piston, sleeve, connecting rod, cylinder head,
carburetor, and pull starter. You should not return the clutch, flywheel collet, nut, air cleaner, manifold, or
muffler.
To ensure quick turn around, please make sure to write your RMA number on the outside of the box. Axial
recommends that you insure the package for up to $200 dollars. Axial is not responsible for lost incoming
shipments.
International Customers Warranty
Please return product to the dealer where the purchase was made. If your Axial product purchase was made
through an on-line retailer, any warranty issues must be taken care of by that retailer. Axial assumes no
responsibility for Axial products sold internationally by on-line retailers.
Visit www.axialracing.com for more engine break in tips!
3-4 tanks
Continue this process for a total of 3 tanks of
fuel.
300
148
AX030
AX038
28RR-2
32RR-1
28RR-2
32RR-1
AX1100
AX1105
AX013
AX054
28RR-2
32RR-1
AX1103
AX1107
28RR-2
32RR-1
AX006
AX046
28RR-2
32RR-1
AX1101
AX1106
AX1103
Use standard size glow plugs only. Axial offers a
full range of glow plugs, visit www.axialracing.com
for more info.
AX1099
28RR-2
32RR-1
AX1104
Standard
28RR-2
AX1097
32RR-1
AX050
Turbo
28RR-2
AX1098
32RR-1
AX053
AX005
28 / 32 Engine Connecting Rod
AX006
28 Engine Piston/Pin Retainer Set
AX007
28 / 32 Engine Retainer for Piston Pin (3 Pcs)
AX012
28 / 32 Engine Pull Start Assy. (w/o One-Way Bearing)
AX013
28 Engine Gasket Set (0.15mm/0.3mm)
AX014
28 / 32 Engine Lock Pin for Carburetor
AX016
28 / 32 Engine Starting Shaft
28 / 32 Engine Screw M3.5 X 16mm for Heat Sink Head (4 Pcs)
AX018
28 / 32 Engine Dust Protection Set
AX019
28 / 32 Engine Slide Carburetor Complete
AX020
28 / 32 Engine Slide Carburetor Main Body
AX021
28 / 32 Engine Uniball
AX022
28 / 32 Engine Idle Adjustment Screw
AX023
28 / 32 Engine Slide Valve
AX024
28 / 32 Engine O-Ring 2 X 1.7mm (2 Pcs) O-Ring 8 x 1 mm (1 Pcs)
AX025
28 / 32 Engine Fuel Line Fitting/Washer Set
AX026
28 / 32 Engine High-Speed Needle Valve
AX027
28 / 32 Engine High-Speed Needle with O-Ring
AX028
28 / 32 Engine Mid Range Needle
AX029
28 / 32 Engine High-Speed Needle Valve Set
AX030
28 / 32 Engine Pull Start Screw Set (8 Pcs)
AX032
28 / 32 Engine Rear Bearing 14 X 25 X 6
AX033
28 / 32 Engine Front Bearing 7 X 19 X 6
AX034
28 / 32 Engine Brass Collet
AX035
28 / 32 Engine Fuel Inlet
AX036
28 / 32 Engine Carb Dust Boot
AX037
28 / 32 Engine O-Ring 2 X 1.5mm (2 Pcs)
AX038
28 / 32 Engine Low Speed Needle Valve
AX039
28 / 32 Engine O-Ring 11.5 X 1.25mm (2 Pcs)
AX040
28 / 32 Engine Silicone Exhaust Seal
AX045
32 Engine piston pin/retainer set
AX046
32 Engine Button Head
AX050
32 Turbo Head Button (Option)
AX053
32 Engine Gasket Set (Brass 0.15mm/ Alum 0.3mm)
AX054
32 Engine Pull Start Shaft Holder (Assembled)
AX056
32 Engine Cover Plate Set
AX058
28 / 32 Engine High-Speed Needle Adjuster Cap
AX072
28RR Spec 1 Button Head
AX1097
28RR Spec 1 Optional Turbo Button Head
AX1098
.28RR-2 Heat Sink Head (Black)
AX1099
.28RR-2 Piston/Sleeve Set
AX1100
.28RR-2 Cylinder/Piston/Connecting Rod Set
AX1101
.28RR-2 Crankcase
AX1102
.28RR-2/.32RR Crankshaft
AX1103
.32RR-1 Heat Sink Head (Black)
AX1104
.32RR-1 Piston/Sleeve Set
AX1105
.32RR-1 Cylinder/Piston/Connecting Rod Set
AX1106
.32RR-1 Crankcase
AX1107
Loading...