Axess TA2511-7 User Manual

1

Preface

Thank you for buying the TA2511-7. We hope you enjoy using it. Please read and r etain all operating instructions before operating the unit; we do not assume any liabi lity arising out of improper operati on or incidental damages. For bette r services, the conte nt of this operation manual may be changed. If the actua l setup and usage of the unit are different from this operation manual, please view our company website to inqui re about the latest pr oduct information.

2

Do not allow water or foreign objects to enter the unit.

I. Note:

1. Avoid dropping th e unit. Avoid seriously shaking the displa y, or the di splay may end

up being damaged and not operate pr operly.

2. Do not u se metal o bjects to touch the device, to prevent it from short circuit.

3. Please backup your data in case your important data is lost, especially before you

upgrade the firmware. The company will not take charge in any loss caused by loss of data.

4. Do not disassemble the unit. Do not wipe the unit’s surface by alcohol, thinner or

benzene.

5. Do not disconnect the unit while it is formatting or uploading/downloading, or the

procedures ma y lead t o errors.

6. We do not take responsibility for any flash memory damage caused by broken

product, repai r or ot her reasons. P l ease operate strictly a s per the user guide.

7. Avoid water or foreign objects from entering the unit.

8. Do not use the unit in places that are extremely hot, cold, dusty, or humid.

3

9. Spec if ications ar e su bje c t to ch ange and im provem e nt w ithout notic e

II. Introduction of cover:

1. Power on/off

2. Earphone Jack

3. Micro USB interface

4. DC charger interface

5. HDMI

6. Front Camera

7. Reset

8. SD card interface

9. Back Camera

10. Loudspeaker

4

III. Operation Instruction

1. Basic Operation

1.1. Power on/Power off

Power on: Press and hold the powe r switch for 5 seconds; the unit displays the start-up logo and enters the working mode. Power off: Press and hold the power switch for 3 seconds to turn the unit off. Sleep: While the device is at working status, press the power switch, and it will enter the sleep mode, turning the screen off. Press t he power switch again, and it will shift to normal mod e. You may use this function whenever you temporarily are not using the device to save power.

1.2. Charging

When t he devic e prompt s low battery, please cha rge it by the provided charger.

Note: To improve the longevity of the battery, you may charge for another 15 minutes after it prompts the battery is full.

5

1.3. Main menu

Click the

icon in the main interfa ce, and the main menu will appea r. It includes the system settings, music playback, video playback, web browser and other applications you installed in the main menu.

2. Settings

Click “ ” in the main int erface to enter t he setting int erface. Click the corr e s ponding se tting ite m s to operat e.

6

7

2.1．Date and Time Setting

Click “Date & Time” in the setting interf ace to set the date and time. Y ou may set the date, time zone, time, time format and date format, etc. in the menu.

8

2.2. Brightness

Select “Display” in t he setting int erface. Click “Brigh tness” to enter, and slide the bar to adjust the brightness.

9

3. Wi-Fi connection

Click “Settings” in the main int erfa c e and cli ck “Wireless & Network” t o ent er t h e wireless and network setting interface. Click Wi-Fi to t urn on the Wi-Fi. Cli ck the Wi-Fi setting to set and manage w ir el e s s acces s.

10

Click “Network Notification”, and it will list the open networks it has searched. Click the name of the selected network; it will pop up the setting window. You may connect it to Wi-Fi, accordin g to the prompts. You will need to input the user name and password if networks are encrypted.

4. Install, Uninstall and Run applications

4.1 Install

There are many ways to install applications under Android, such as via USB, or by third party program. We introduce installation by Apps Installer here.

Click the “Explorer”or “Apkinstaller” in the m ai n interface. Select the APK file you want and enter the application installation interface. Click “Install” to install the application automatically. After installation, it prompts “Open” and “Finish”. Click “Op en” to open the app lication. Click “Finish” to exit.

4.2 Uninstall

You may use the corresponding third party software management tool, or the inst alled ap plicat ion management software of this device, to uninstall applications. Select “Setting/Applications/Manage applications” to select the installed applications and check the attribute of it to uninstall, or uninstall the application completely.

11

5. Connect to internet

5.1. After connecting with Wi-Fi, open the browser and input the web address. You can

then browse the web.

5.2. Click the

icon to enter the bookmark to view the browse history. Click the

web page you want to open it. To save a bookmark for the web page, you may click

to enter and click

“add” to save it.

6. Audio and video playback

6.1. Audio playback

Click “Music” in t he main m enu to enter the audio playback interface. It lists the audio files in the device, and you may click the file name to play it. In the audio playing interface, click the icons to play/pause/increase volume/decrease volume/FF/REW….

12

13

6.2. Video Playback

Click “Video” in the main menu to enter the video playbac k interface. It lists the video f iles in the devi ce, and you may click the file name to play it. In the video playing interfac e, touch the sc r een to pop-up the operation icons and click the icons to play/pause/increase volume/decreas e volume/skip to next file/skip to previous file….

14

7. Pict ure viewing

Click “Gallery” in the main menu to enter the picture folder list. Select and click the folder you want to enter, and it will display th umbnails of the pictures. Click the thumbnail of the picture to view it.

Touch the screen’s pop-up operation icons while viewing the picture - you may zoom in/zoom out/skip to the next picture/skip to the pre vious pi cture/rotate/delete the picture…

15

16

17

8. 3G DONGLE

The devi c e su pport s an external 3 G Dongle - connect the 3G dongle to the device via the external transfer cable port. After the dongle indicator lights up, you may use the 3G network normally.

18

9. Camera

Click “Camer a” in th e main interface.

9.1 Camera

If the cursor is in

position, the device is in Camera mode.

Click

to take a picture.

Click

to set the scene mode, pic ture size, picture quality, and color effect.

9.2 DV If the cu rs or is in

position, the device is in DV mode.

Click to record video.

19

Click to set the color effec t or restore to default settings.

10. Connect with external device

10.1. Connect with PC

Connect the d evice with the PC v ia USB cable. Two new disk symbols wil l appe ar on the PC, after being connected successfully. One is the TF card, and t he othe r is the bu ilt-in flash memory.

20

21

10.2. Use of OTG and USB host

This unit supports the movable device with FAT32 format, such as U disk and MP3. Connect the movable device to th e unit. (Note: Only OTG could support USB mouse and keyboard; USB HOST only supports USB2.0 High Speed Device)

22

10.3. Applications

For convenient usage, we have installed some third party software in the unit. For detailed operation methods, please check the corresponding instructions. Some of the software may or may not be able to be used in some areas because of network service.

IV. Troubleshooting

1. What if the device is function ing abn ormally during operation?

Answer: 1). R eboot the device to see if it works OK.

2). Charge the device, using the charger, to energize the b attery. Mak e sure it has p o wer before you operate it.

3). It is suggested to upgrade the OS of the device by professional.

2. Why is the standby time so short sometimes?

Answer: the usage time of the bat tery depends on the temperature and usage. If the

23

temperature is too high or too low, the usage time of t he battery might be effec ted. It is suggested to use the device in normal temperature. The usage time is also affected by increased volume and operation frequency.

VI. Specifications

Item

TA2511-7

Dimension

7.54” (191.5mm) W x 4 .31” (109.5mm) H x 0.4” (10.2mm) D

Display

7” TFT to uch panel

OS

Android 4.2.2

Inp ut met h o d

So ft Keypad

Capacity

4GB Storage, 512MB Memor y

External Capacity

SD Card, up to 32GB

Audio

MP3, WMA, FLAC, APP, OGG…….(support all audio formats)

Video

mpeg4-sp, asp, divx, WMV, RMVB, H.264/1080P (s upport all video formats)

E-book

Supported

Wireless network

Supports Wi-Fi

24

Language

Multi-Language

USB

USB2.0 High-Speed

OTG

Supported

Temperature

-20℃ to 60℃

Power supply

AC 100 ~240V 50/ 60Hz; DC 5V/2A

Battery

High-Capacity 2800 mAh Lit hium Ion Polymer Battery

Not e: T he p ictures lis ted in the ma n ua l are fo r reference on ly! The design and specifications of the unit are subject to change without notice.

25

Axess TA2511-7 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual