Axel BoxTel, A112010000 Operating Manual

Operating Manual

Compact Telephone Hybrid

(Rev. 2.0 ENG)

Main Office BOLOGNA: Via Caduti Di Sabbiuno 6/F

40011 Anzola Emilia - Bologna - Italy

Tel. [phone] - Fax. [phone]

Regional Office BERGAMO: Via Italia 1 –

24030 Medolago (Bg) – Italy

Tel. [phone] - Fax. [phone]

e-mail:

[e-mail]

- web site: www.axeltechnology.com

BoxTel

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

CONTENTS

1 INTRODUCTION ......................................................................................................................................................... 3

1.1

USE OF THIS “USER MANUALE” ....................................................................................................................... 3

2

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA ...................................................................................... 4

2.1

FOREWORD ....................................................................................................................................................... 4

3 SAFETY WARNINGS ................................................................................................................................................. 5

4

CONSIGNES DE SÉCURITÉ IMPORTANTES ........................................................................................................... 6

5 ISTRUZIONI IMPORTANTI PER LA SICUREZZA ..................................................................................................... 7

6

WICHTIGE SICHERHEITSHINWEISE ........................................................................................................................ 8

7

INSTRUCCIONES IMPORTANTES DE SEGURIDAD ............................................................................................... 9

8

UNPACKING AND INSPECTION ............................................................................................................................. 10

9 FIRST INSTALLATION RECOMMENDATIONS ...................................................................................................... 11

9.1

POWER SUPPLY CABLE ................................................................................................................................. 11

9.2

AC MAINS VOLTAGE SETTING (230 V / 115 V) ............................................................................................... 11

9.3

FUSE REPLACEMENT ..................................................................................................................................... 12

9.4 PROTECTION AGAINST LIGHTNING .............................................................................................................. 13

9.5

VENTILATION ................................................................................................................................................... 13

10 INTRODUCTION ................................................................................................................................................... 14

10.1.1

QUALITY .................................................................................................................................................................... 14

10.1.2

MAIN FEATURES: ..................................................................................................................................................... 14

11 BOXTEL EQUIPMENT DESCRIPTION ................................................................................................................ 15

11.1

FRONT PANEL ................................................................................................................................................. 15

11.2

REAR PANEL .................................................................................................................................................... 16

12 WIRING AND CONNECTIONS ............................................................................................................................. 17

12.1

AUDIO INPUT (SEND) ...................................................................................................................................... 17

12.2

AUDIO OUTPUT (RECEIVE) ............................................................................................................................. 18

12.3

THE REMOTE INTERFACE .............................................................................................................................. 19

12.4

INTERFACES TO OXYGEN 5 AND OXYGEN 7 MIXING CONSOLES .............................................................. 20

12.5 TELEPHONE LINE CONNECTION ................................................................................................................... 21

13 TECHNICAL SPECIFICATIONS ........................................................................................................................... 22

14

WEEE Directive – Informativa RAEE ................................................................................................................. 23

15

WARRANTY ......................................................................................................................................................... 24

16 DECLARATION OF ROHS CONFORMITY .......................................................................................................... 24

17

AXEL TECHNOLOGY IN TOUCH ........................................................................................................................ 25

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

ITA

AXEL | INTRODUCTION

3

1 INTRODUCTION

ARTICLE#

MODEL

DESCRIPTION

A112010000

BOXTEL

Compact phone hybrid 1 (PSTN/POTS), banaced input and
output via transformer over Jack ¼” , remote port control.
No power supply needed

1.1 USE OF THIS “USER MANUALE”

This end user manual is specially designed for BoxTel.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA

AXEL | SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA

4

2 SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA

SAFETY WARNINGS

CONSIGNES DE SÉCURITÉ IMPORTANTES

ISTRUZIONI IMPORTANTI PER LA SICUREZZA

WICHTIGE SICHERHEITSHINWEISE

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

(Rel. 1.3)

2.1 FOREWORD

For your own safety and to avoid invalidation of the warranty all text marked with these Warning Symbols
should be read carefully.

Information in this manual is subject to change without notice and does not represent a commitment on the part of the
vendor.

The manufacturer shall not be liable for any loss or damage whatsoever arising from the use of information or any error
contained in this manual, or through any mis-operation or fault in hardware contained in the product.

It is recommended that all maintenance and service on the product should be carried out by the manufacturer or its
authorised agents. The manufacturer cannot accept any liability whatsoever for any loss or damage caused by service,
maintenance or repair by unauthorised personnel.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

SAFETY WARNINGS

AXEL | SAFETY WARNINGS

5

3 SAFETY WARNINGS

The installation and servicing instructions in this manual are for use by qualified personnel only.

-

Read All Instructions. All safety and operating instructions must be read before operating the product. They also

must be retained for future reference, as it contains a number of useful hints for determining the best combination of

equipment settings for Yr particular application.

-

Heed All Warnings. All warnings on the product and those listed in the operating instructions must be adhered to.

-

Heat

. This product must be situated away from any heat sources such as radiators or other products (including

power amplifiers or transmitters) that produce heat.

-

Power Sources. This product must be operated from the type of power source indicated on the marking label and in

the installation instructions. If you are not sure of the type of power supplied to your facility, consult your local power
company. Make sure the AC main voltage corresponds to that indicated in the technical specifications. If a different
voltage (ex. 110/115 VAC) is available, open the equipment closure and set the voltage switch on the main supply

circuit, located behind the AC socket

-

Power Cord Protection. Power supply cords must be routed so that they are not likely to be walked on nor pinched

by items placed upon or against them. Pay particular attention to the cords at AC wall plugs and convenience

receptacles, and at the point where the cord plugs into the product

-

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

-

Lightning. For added protection for this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the AC wall outlet and the audio connections. This will prevent damage to the
product due to lightning and power line surges

-

Installation. Configuration and installation should only be carried out by a competent installation engineer

-

Cabling. Using high quality wires, well protected. Make sure the cable integrity.

This symbol alerts you to the presence of dangerous voltage inside the closure – voltage which

may be sufficient to constitute a risk of shock. Do not perform any servicing other than that

contained in the operating instructions. Refer all servicing to qualified personnel

The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.

Do not change the voltage setting or replace the mains fuse without first turning the unit off

and unplugging the mains cord

Make sure the AC main voltage corresponds to that indicated in the technical specifications.

THIS APPARATUS MUST BE EARTHED !

To avoid risk of fire use the correct value fuse, as indicated on the label stuck on the right

side of the unit.

This apparatus uses a single pole mains switch and does therefore not separate the unit

completely from the mains power. To completely separate from mains power (f.i. in the event
of danger) unplug mains power cord. As the MAINS plug is the disconnect device, the

disconnect device shall remain readily operable.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

CONSIGNES DE SÉCURITÉ IMPORTANTES

AXEL | CONSIGNES DE SÉCURITÉ IMPORTANTES

6

4 CONSIGNES DE SÉCURITÉ IMPORTANTES

-

Lire ces consignes

-

Conserver ces consignes

-

Observer tous les avertissements

-

Suivre toutes les consignes

-

Ne pas utiliser cet appareil à proximité de l’eau

-

Ne pas obstruer les ouvertures de ventilation. Instal ler en r espe cta nt les con signes du fa brica nt

-

Ne pas installer à proximité d'une source de chaleur telle qu'un radiateur, une bouche de chaleur, un poêle ou
d'autres appareils (dont les amplificateurs) produisant de la chaleur.

-

Ne pas annuler la sécurité de la fiche de terre, la troisième bra nche est de stinée à l a sécurité. Si la fiche f ournie
ne s'adapte pas à la prise électrique, demander à un électricien de remplacer la prise hors normes.

-

Protéger le cordon d'alimentation afin que personne ne marche dessus et que rien ne le pince, en particulier aux
fiches, aux prises de courant et au point de sortie de l’appareil

-

Utiliser uniquement les accessoires spécifiés par le fabricant

-

Utiliser uniquement avec un chariot, un support ou une table spécifié par le fabricant ou vendu avec l’appareil. Si

un chariot est utilisé, déplacer l’ensemble chariot–

appareil avec précaution afin de ne pas le renverser, ce qui

pourrait entraîner des blessures

-

Débrancher l’appareil pendant les orages ou quand il ne sera pas utilisé pendant longtemps.

-

Confier toute réparation à du personnel qualifié. Des réparations sont nécessaires si l’appareil est endommagé

d’une façon quelconque, par exemple: cordon ou prise d’alimentation endommagé, liquide renversé ou objet tombé à
l’intérieur de l’appareil, exposition de l’appareil à la pluie ou à l’humidité, appareil qui ne marche pas normalement ou

que l’on a fait tomber.

-

NE PAS exposer cet appareil aux égouttures et aux éclaboussements. Ne pas poser des objets contenant de
l'eau, comme des vases, sur l'appareil

Ce symbole indique la présence d'une tension dangereuse dans l'appareil constituant un risque de
choc électrique.

Ce symbole indique que la documentation fournie avec l'appareil contient des instructions
d'utilisation et d'entretien importantes.

Avant de modifier le commutateur de changement de tension ou replacer le fusible il faut

débrancher l’appareil de la prise électrique. Pendant son usage, l’appareil doit etre branchee à la

prise de terre

Utiliser le fusible principal AC avec le valeur qui est indiquée sur l'étiquette collée sur le coffret.

Assurez-vous que la tension principale AC correspond à celle indiquée dans les spécifications

techniques.

L’interrupteur d’alimentation interrompt un pôle du réseau d’alimentation excepté le conducteur

de terre de protection. En cas de danger, debrancher le cordon d'alimentation. Parce que la prise

du réseau de alimentation est utilisée comme dispositif de déconnexion, ce dispositif doit
demeuré aisément accessible

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

ISTRUZIONI IMPORTANTI PER LA SICUREZZA

AXEL | ISTRUZIONI IMPORTANTI PER LA SICUREZZA

7

5 ISTRUZIONI IMPORTANTI PER LA SICUREZZA

-

Leggere le presenti istruzioni

-

Conservare queste istruzioni

-

Osservare tutte le avvertenze

-

Seguire scrupolosamente tutte le istruzioni

-

Non usare questo apparecchio in prossimità di acqua

-

Non ostruire alcuna apertura per il raffreddamento. Installare l’apparecchio seguendo le istruzioni

-

Non installare l'apparecchio accanto a fonti di calore quali radiatori, aperture per l'afflusso di aria calda, forni o
altri apparecchi (amplificatori inclusi) che generino calore

-

Non rimuovere il terminale di connessione a terra sul cordone di alimentazione: esso ha lo scopo di tutelare

l’incolumità dell’utilizzatore. Se la spina in dotazione non si adatta alla presa di corrente, rivolgersi ad un elettricista

per far eseguire le modifiche necessarie.

-

Evitare di calpestare il cavo di alimentazione o di comprimerlo, specialmente in corrispondenza della spina e del
punto di inserzione sull’apparato.

-

Utilizzare solo dispositivi di collegamento e gli accessori specificati dal produttore.

-

Utilizzare l’apparecchio solo con un carrello, un sostegno, una staffa o un tavolo di tipo specificato dal produttore o
venduto insieme all’apparecchio. Se si utilizza un carrello, fare attenzione negli spostamenti per evitare infortuni
causati da ribaltamenti del carrello stesso.

-

Scollegare l’apparecchio dalla presa di corrente durante i temporali o quando inutilizzato a lungo

-

Per qualsiasi intervento, rivolgersi a personale di assistenza qualificato. È’ necessario intervenire sull’apparecchio
ogniqualvolta si verificano danneggiamenti di qualsiasi natura. Ad esempio, la spina o il cavo di alimentazione sono
danneggiati, è entrato liquido nell’apparecchio o sono caduti oggetti su di esso, l’apparecchio è stato esposto alla

pioggia o all’umidità, non funziona normalmente o è caduto.

-

Non esporre a sgocciolamenti o spruzzi. Non appoggiare sull'apparecchio oggetti pieni di liquidi, ad esempio vasi
da fiori.

Questo simbolo indica la presenza di alta tensione all'interno dell' app ar ecch i o, che compo rt a rischi di
scossa elettrica.

Questo simbolo indica la presenza di istruzioni importanti per l'uso e la manutenzione nella
documentazione in dotazione all'apparecchio.

Non sostituire il fusibile o cambiare la tensione di alimentazione senza aver prima scollegato il

cordone di alimentazione. L’APPARATO DEVE ESSERE CONNESSO A TERRA.

Sostituire il fusibile generale con uno di identico valore, come indicato sulla etichetta applicata

sul mobile dell’apparato

Assicurarsi che la tensione di rete corrisponda a quella per la quale è configurato

l’apparecchio

Questo apparato utilizza un interruttore di alimentazione di tipo unipolare e l’isolamento dalla

rete elettrica non è pertanto completo. Per ottenere un isolamento totale (ad esempio in caso di

pericolo), scollegare il cordone di alimentazione. Inoltre, poichè la spina di alimentazione è
utilizzata come dispositivo di sezionamento, essa deve restare facilmente raggiungibile

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

WICHTIGE SICHERHEITSHINWEISE

AXEL | WICHTIGE SICHERHEITSHINWEISE

8

6 WICHTIGE SICHERHEITSHINWEI S E

-

Diese Hinweise LESEN

-

Diese Hinweise AUFHEBEN

-

Alle Warnhinweise BEACHTEN

-

Alle Anweisungen BEFOLGEN

-

Dieses Gerät NICHT in der Nähe von Wasser verwenden

-

KEINE Lüftungsöffnungen verdecken. Gemäß den Anweisungen des Herstellers einbauen

-

Nicht in der Nähe von Wärmequellen, wie Heizkörpern, Raumheizungen, Herden oder anderen Geräten
(einschließlich Verstärkern) installieren, die Wärme erzeugen

-

Die Schutzfunktion des Schukosteckers NICHT umgehen. Bei Steckern für die USA gibt es polarisierte Stecker,

bei denen ein Leiter breiter als der andere ist; US-Stecker mit Erdung verfügen über einen dritten Schutzleiter. Bei
diesen Steckerausführungen dien

t der breitere Leiter bzw. der Schutzleiter Ihrer Sicherheit. Wenn der mitgelieferte

Stecker nicht in die Steckdose passt, einen Elektriker mit dem Austauschen der veralteten Steckdose beauftragen

-

VERHINDERN, dass das Netzkabel gequetscht oder darauf getreten wird, insbesondere im Bereich der Stecker,
Netzsteckdosen und an der Austrittsstelle vom Gerät

-

NUR das vom Hersteller angegebene Zubehör und entsprechende Zusatzgeräte verwenden.

-

NUR in Verbindung mit einem vom Hersteller angegebenen oder mit dem Gerät verkauften Transportwagen, Stand,
Stativ, Träger oder Tisch verwenden. Wenn ein Transportwagen verwendet wird, beim Verschieben der
Transportwagen-Geräte- Einheit vorsichtig vorgehen, um Verletzungen durch Umkippen

-

Das Netzkabel dieses Geräts während Gewittern oder bei längeren Stillstandszeiten aus der Steckdose
ABZIEHEN.

-

Alle Reparatur- und Wartungsarbeiten von qualifiziertem Kundendienstpersonal DURCHFÜHREN LASSEN.
Kundendienst ist erforderlich, wenn das Gerät auf irgendwelche Weise beschädigt wurde, z.B. wenn das Netzkabel

oder der Netzstecker beschädigt wurden, wenn Flüssigkeiten in das Gerät verschüttet wurden oder Fremdkörper

hineinfielen, wenn das Gerät Regen oder Feuchtigkeit ausgesetzt war, nicht normal funktioniert oder fallen gelassen
wurde.

-

Dieses Gerät vor Tropf- und Spritzwasser SCHÜTZEN. KEINE mit Wasser gefüllten Gegenstände wie zum
Beispiel Vasen auf das Gerät STELLEN.

Dieses Symbol zeigt an, dass gefährliche Spannungswerte, die ein Stromschlagrisiko darstellen,
innerhalb dieses Geräts auftreten.

Dieses Symbol zeigt an, dass das diesem Gerät beiliegende Handbuch wichtige Betriebs- und
Wartungsanweisungen enthält.

Vor Änderung der Netzspannung oder Sicherungswechsel Netzkabel trennen.

Das Gerät muss für den Betrieb geerdet werden.

Hauptsicherung nur mit einer gleichwertigen austauschen

(s. entsprechende Etikette).

Vor Einschalten Netzspannungseinstellung am Gerät überprüfen bzw. anpassen.

Inpoliger Netzschalter. In Notfälle oder für Wartungsarbeiten Netzkabel trennen. Der Netzstecker

fungiert auch als Trennelement muss deshalb zugänglich bleiben

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

AXEL | INSTRUCCIONES IMPORTANTES DE SEGURIDAD

9

7 INSTRUCCIONES IMPORTANTES DE SEGURIDAD

-

LEA estas instrucciones

-

CONSERVE estas instrucciones

-

PRESTE ATENCION a todas las advertencias.

-

SIGA todas las instrucciones

-

NO utilice este aparato cerca del agua

-

NO obstruya ninguna de las aberturas de ventilación. Instálese según lo indicado en las instrucciones del
fabricante

-

No instale el aparato cerca de fuentes de calor tales como radiadores, registros de calefacción, estufas u otros
aparatos (incluyendo amplificadores) que produzcan calor

-

NO anule la función de seguridad del enchufe polarizado o con clavija de puesta a tierra. Un enchufe polarizado

tiene dos patas, una más ancha que la otra. Un enchufe con puesta a tierra tiene dos patas y una tercera clavija con

puesta a tierra. La pata más ancha o la tercera clavija se proporciona para su seguridad. Si el toma corriente no es
del tipo apropiado para el enchufe, consulte a un electricista para que sustituya el toma corriente de estilo anticuado

-

PROTEJA el cable eléctrico para evitar que personas lo pisen o estrujen, particularmente en sus enchufes, en los
toma corrientes y en el punto en el cual sale del aparato

-

UTILICE únicamente los accesorios especificados por el fabricante

-

UTILICESE únicamente con un carro, pedestal, escuadra o mesa del tipo especificado por el fabricante o vendido

con el aparato. Si se usa un carro, el mismo debe moverse con sumo cuidado para evitar que se vuelque con el

aparato

-

DESENCHUFE el aparato durante las tormentas eléctricas, o si no va a ser utilizado por un lapso prolongado.

-

TODA reparación debe ser llevada a cabo por técnicos calificados. El aparato requiere reparación si ha sufrido

cualquier tipo de daño, incluyendo los daños al cordón o enchufe eléctrico, si se derrama líquido sobre el aparato o

si caen objetos en su interior, si ha sido expuesto a la lluvia o la humedad, si no funciona de modo normal, o si se ha
caído.

-

NO exponga este aparato a chorros o salpicaduras de líquidos. NO coloque objetos llenos con líquido, tales como
floreros, sobre el aparato .

Este símbolo indica que la unidad contiene niveles de voltaje peligrosos que representan un riesgo

de choques eléctricos.

Este símbolo indica que la

literatura que acompaña a esta unidad contiene instrucciones importantes

de funcionamiento y mantenimiento.

Antes de cambiar la alimentacion de voltaje o de cambiar el fusible, desconecte el cable de

alimentacion. Para reducir el riesgo de descargas electricas, esta unidad debe ser conectada a

tierra.

Remplaze el fusible con lo mismo, que corresponde a lo indicado en el panel del equipo.

Antes de encender, controlar que la linea de alimentacion de voltaje corresponda a la indicada

El interruptor de alimentación es unipolar. En el caso de peligro, desconecte el cable de
alimentación. Porque la clavija de conexion a red sirve por la desconection de la unidad, la
clavija debe ser ubicada en proximidad de la unidad

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

UNPACKING AND INSPECTION

ENG

Axel Technology srl www.axeltechnology.com UNPACKING AND

INSPECTION

10

8 UNP ACKING AND INSPECTION

Your equipment was packed carefully at the factory in a container designed to protect the unit during shipment.
Nevertheless, we recommend making a careful inspection of the shipping carton and the contents for any signs of
physical damage.

Damage & Claims

If damage is evident, do not discard the container or packing material. Contact your carrier immediately to file a claim for
damages. Customarily, the carrier requires you, the consignee, to make all damage claims. It will be helpful to retain the
shipping documents and the waybill number.

Save all packing materials! If You should ever have to ship the unti (e.g. for servicing), it is best to ship it in the
original carton with its packing materials because both the carton and packing material have been carefully
designed to protect the unit.

Under normal conditions no user maintenance or calibration are required. Internal links and preset controls may be set to
configure the unit during installation. Any service work required should be carried out by qualified service

personnel only.

We are able to offer further product support through our worldwide network of approved dealers and service agents.

To help us provide the most efficient service please would you keep a record of the unit serial
number, and date and place of purchase to be quoted in any communication regarding this

product.

The actual equipment Serial Number is indicated on the

silver label stuck on the rear panel of the equipment closure.

Tools And Equipment Needed

Only standard technician’s tools are required to install this equipment.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

FIRST INSTALLATION RECOMMENDATIONS

ENG

Axel Technology srl www.axeltechnology.com FIRST INSTA LLATION

RECOMMENDATIONS

11

9 FIRST INSTALLATION RECOMMENDATIONS

9.1 POWER SUPPLY CABLE

A power supply cable of approx. 2 mt length is supplied with the device, which has a moulded IEC plug attached – this is
a legal requirement.
The type of plug for the power supply depends on the country in which it is delivered.

If for any reason, you need to use this appliance with a different plug, you should use the following wiring guidelines in
replacing the exsisting plug with the new one:

Earth

Green, or green and yellow

Neutral (N)

Blue

Live (L)

Brown

Supply cables should be laid in such a manner that one does not step or walk on them. They should not be squashed by
any objects.

THIS EQUIPMENT MUST BE EARTHED.

The chassis is always connected to mains earth to ensure your safety: check your mains wiring and earthing before
switching on.

9.2 AC MAINS VOLTAGE SETTING (230 V / 115 V)

BE SURE THAT THE UNIT IS SET TO THE CORRECT MAINS/LINE VOLTAGE FOR YOUR

COUNTRY BEFORE PLUGGING IT INTO THE WALL OUTLET !

The actual Mains voltage is indicated on the

label

stuck on the equipment closure. Should the type of power at the

operation location not be known, please contact your dealer or electricity company.

If, for some reason, the unit is to be operated at a mains input voltage which is different to that as supplied, you need to
switch the voltage selector on the right side of the unit. You also need to replace the AC main fuse, according to
information provided on the external label or on the Technical Specifications table at the end of this user manual.

CAUTION:

TO REDUCE THE RISK OF ELECTRICAL SHOCK, ALWAYS DISCONNECT THE AC

MAINS CABLE BEFORE ALTERING THE CHANGE-

OVER SWITCH. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

FIRST INSTALLATION RECOMMENDATIONS

ENG

Axel Technology srl www.axeltechnology.com FIRST INSTA LLATION

RECOMMENDATIONS

12

9.3 FUSE REPLACEMENT

The power supply socket has an integral fuse drawer containing the AC power fuse and a spare, both of the same value.

BEFORE REPLACING THE POWER FUSE, MAKE SURE YOU HAVE THE RIGHT TYPE OF FUSE FOR
THE VOLTAGE TO BE PROTECTED.
USING WRONG FUSE TYPE WILL RESULT IN INSUFFICIENT PROTEC TION.

Make sure that the power is switched off and the power cable is disconnected from the equipment.

a. Open the fuse drawer using a small blade screwdriver.

b.

Replace the fuse located at the internal position

c. Push the fuse socket back into the original position (a.)

Perform the set-up under static control conditions. Static charges are likely to completely destroy one or

more of the CMOS semiconductors employed in the unit. Static damage will not be covered under
warranty
Basic damage prevention consists of minimizing generation, discharging any accumulated static charge
on your body and preventing that discharge from being sent to or through any electronic component.

.

Uninsulated dangerous voltage are inside the enclosure, voltage that may be sufficient to constitute a
risk of shock.
Always disconnect to AC Mains before removing the top cover

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

FIRST INSTALLATION RECOMMENDATIONS

ENG

Axel Technology srl www.axeltechnology.com FIRST INSTA LLATION

RECOMMENDATIONS

13

9.4 PROTECTION AGAINST LIGHTNING

Should the device be put out of action due to being struck by lightning or excess voltage, disconnect it

from the power supply

without delay. Do not reconnect until the device has been checked. If in doubt

contact the technical support service.
Make sure there is suitable lightning protection to protect the device.

Alternatively you should disconnect all connectors from the devic

e during a storm or when the device

is going to be unsupervised or not used for a longer period of time.

These measures will protect against damage by lightning or excess voltage.

9.5 VENTILATION

The equipment will operate as a free-standing unit without requiring any special cooling arrangement.
However, slots and openings in the product are provided for ventilation. They ensure reliable operation of the product,
keeping it from overheating. These openings must not be blocked nor covered during operation.

YOU MUST LEAVE AT A MINIMUM ONE RACK UNIT OF EMPTY SPACE ABOVE THE EQUIPMENT TO ENHANCE
VENTILATION AND TO GET A LONGER EQUIPMENT LIFE.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

INTRODUCTION

ENG

Axel Technology srl www.axeltechnology.com INTRODUCTION

14

10 INTRODUCTION

10.1.1 QUALITY

BoxTel is a very small analog telephone hybrid, especially designed for all those applications (OB Van, news gathering,
out side links, etc) where weight and dimensions are crucial.

BoxTel features an high-tech ‘heart’, providing high level performance. BoxTel may be easily connected to the most
diffused audio consoles on the market thanks to its complete connecting features.

BoxTel is directly powered by telephone lines: no longer cares and warries about battery charge, cables and availability
of the Main AC voltage….

10.1.2 MAIN FEATURES:

- Balanced audio input (jack 6.3 mm) with level control

- Balanced audio output (jack 6.3 mm) with level control.

- 2 wire interface with parallel connection to an external telephone set

- Remote and direct control of line hooking and incoming call signalling functions

- Automatic line compensation

- Internal buzzer on/off

- Powered by telephone line

This appliance is connected to telephone networks indirectly through interface (in-house telephone exchange). Direct
connection to the public telephone net is under sole responsibility of the user.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

BOXTEL EQUIPMENT DESCRIPTION

ENG

Axel Technology srl www.axeltechnology.com BOXTEL EQUIPMENT

DESCRIPTION

15

11 BOXTEL EQUIPMENT DESCRIPTION

11.1 FRONT PANEL

- Send control: it adjusts the level of audio sent to telephone caller through the ‘Send’ connector on the rear panel.

- Receive control: It controls the level of the signal incoming from telephone caller

The ‘received’ signal is provided on the Receive Jack connector (rear panel).

.

- HOOK button: it allows Line hooking. This switch hooks / hangs up the hybrid from the telephone line. Hook LED
switchs on accordingly.

- Call LED. It blinks when a call (ring) is coming in and lights firmly while line is hooked. Please note: LED switchs on
only if phone line is connected.

- On / Off micro-switcher: it enables / disables ring buzzer inside the hybrid.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

BOXTEL EQUIPMENT DESCRIPTION

ENG

Axel Technology srl www.axeltechnology.com BOXTEL EQUIPMENT

DESCRIPTION

16

11.2 REAR PANEL

- Receive Output (transformer balanced): it provides the audio signal incoming from telephone caller

- Send Input (transformer balanced): it receives audio signal from the source (mixing console) and sends it to the

telephone caller. Audio sent to caller must be a mix-minus (N-1). Mix-minus is a mix of all audio being sent to the Send
Jack of the hybrid, minus the incoming caller audio.

- Remote. 9 pin interface for remote line hooking and external call signalling

- LINE RJ11 socket for telephone line connection (LINE) – see relevant Paragraph

- PHONE RJ11 socket for connection of a standard telephone set (f.i. for dialling). Please note that ‘Phone’ socket is

always active (i.e. it does not depend on the ‘Hook’ button state).

- Earth connection: in order to prevent damages due to lightnings surges or overvoltages on the telephone line, connect
BoxTel to earth.

BoxTel is automatically powered by telephone line. An external Voltage (+ 6V) is required only for some
applications.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

WIRING AND CONNECTIONS

ENG

Axel Technology srl www.axeltechnology.com WIRING AND

CONNECTIONS

17

12 WIRING AND CONNECTIONS

We suggest to use high quality wires, well protected, and balanced connections to avoid external EMD.

12.1 AUDIO INPUT (SEND)

The equipment features a line input (transformer balanced) on female Jack connector.
Input impedance is set to 4 KOhm. Connector pinout is as following:

1 3

2

GND Gnd
TIP Signal
RING Return

Example of balanced connection (XLR - Jack)

Example of unbalanced connection (PIN RCA - Jack), where cold pole (RING) is connected to the ground (GND).

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

WIRING AND CONNECTIONS

ENG

Axel Technology srl www.axeltechnology.com WIRING AND

CONNECTIONS

18

12.2 AUDIO OUTPUT (RECEIVE)

The equipment features outputs transformer balanced on Jack connector. Connector pinout is as following

1 3

2

GND Gnd
TIP Signal
RING Return

Example of balanced connection (XLR - Jack)

Example of unbalanced connection (PIN RCA - Jack), where cold pole (RING) is connected to the ground (GND).

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

WIRING AND CONNECTIONS

ENG

Axel Technology srl www.axeltechnology.com WIRING AND

CONNECTIONS

19

12.3 THE REMOTE INTERFACE

BoxTel remote interface is based on a 9 pin SubD male interface and allows:

- Remote hooking of telephone line

- Incoming call signalling.
The interface has been especially designed for simple connction to Oxygen 5 and Oxygen 7 consoles.

INCOMING CALL SIGNALLING

A photocoupler inside BoxTel (pin 8 = collector and pin 1 = emitter - see ‘A’ in the picture below) provides a low­resistance closure (150 Ohm) every time phone line rings. Max current allowed: 10 mA.

SubD – 9p

Male connector

Pin 1 GND
Pin 2 N.C.
Pin 3 N.C.
Pin 4 Base of transistor driving HOOK relay.
Pin 5 Internally shortcircuited to Pin 6 and 9
Pin 6 External supply (+ 6 V DC) input
Pin 7 N.C.
Pin 8 Ring photocoupler collector
Pin 9 Internally shortcircuited to Pin 6 and 5

An

external LED

(Ring LED in the picture here-above) must be connected to pins 9 and 8 through a 470 Ohm resistor

(see R1). Pin 6 must be fed with + 6 V DC voltage.

SubD – 9p

Male connector

Pin 1 GND
Pin 2 N.C.
Pin 3 N.C.
Pin 4 Base of transistor driving HOOK relay.
Pin 5 Internally shortcircuited to Pin 6 and 9
Pin 6 External supply (+ 6 V DC) input
Pin 7 N.C.
Pin 8 Ring photocoupler collector
Pin 9 Internally shortcircuited to Pin 6 and 5

Internal Photocoupler (‘A’) can

directly

drive an external Lamp (like Mr. Light by Axel Technology). In this case, pin 8 of

BoxTel interface must be connected to the central pin of Mr. Light connector.

LINE HOOKING

Pins 5 and 4 allows remote line hooking command (provided through either a photocoupler or a clean contact closure).
An external powering is required for this aim.

Please feed Pin 6 with + 6 V DC

.

1

6

5

9

1

6

5

9

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

WIRING AND CONNECTIONS

ENG

Axel Technology srl www.axeltechnology.com WIRING AND

CONNECTIONS

20

SubD – 9p

Male connector

Pin 1 GND
Pin 2 N.C.
Pin 3 N.C.
Pin 4 Base of transistor driving HOOK relay.
Pin 5 Internally shortcircuited to Pin 6 and 9
Pin 6 External supply (+ 6 V DC) input
Pin 7 N.C.
Pin 8 Ring photocoupler collector
Pin 9 Internally shortcircuited to Pin 6 and 5

12.4 INTERFACES TO OXYGEN 5 AND OXYGEN 7 MIXING CONSOLES

BoxTel remote interface has been designed for direct connection to Telco modules of OXYGEN 5 and OXYGEN 7
mixing consoles by Axel Technology.

A regular, not crossed Pin – to – Pin 9 pole cable featuring standard RS232 connectors is required (9 pin serial
connection computer type).

1 1
2

6 6

2

3

7 7

3

4

8 8

4

5

9 9

5

9pM 9pF

1

6

5

9

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

WIRING AND CONNECTIONS

ENG

Axel Technology srl www.axeltechnology.com WIRING AND

CONNECTIONS

21

12.5 TELEPHONE LINE CONNECTION

BoxTel hybrid operate on analog telephone lines.

MAKE SURE this appliance is connected to POTS / PSTN, analogue lines

DO NOT CONNECT this appliance to digital Telephone lines

DO NOT CONNECT this appliance to ADSL telephone lines, even if filtered.

In order to avoid any Hum and for EMC reasons, this unit must be earthed via earthing screws on
the rear panel.

This appliance is connected to telephone networks indirectly through interface (in-house telephone
exchange / P ABX

). Direct connection to the public telephone net is under sole responsibility of the

user.

RJ11 socket will accept 4 conductor modular plugs, but only the 2 centr a l pins (number 2 and 3) are typically used:

CONNECTOR PIN-OUT

Pin

Description

1

n.c.

2

Tel line

3

Tel line

4

n.c.

This unit allows the connection on parallel of a standard telephone set (for dialling services). Please note that ‘Phone’
socket is always active (i.e.

it doesn’t depend on the ‘Hook’ button state

) and it has the same Pin-Out as the LINE socket.

The telephone hybrid interface is powered by the same power flowing also into the external
telephone set. In the event You will experience some lack in the audio performance or in the
telephone hybrid operation (no Ring, no Hook, etc), try to disconnect the Telephone Set itself.

Should the device be put out of action due to being struck by lightning or excess voltage,

disconnect it from the telephone line without delay.

Do not reconnect until the device has been

checked. If in doubt contact the technical support service.

Make sure there is suitable lightning protection to protect the device.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

TECHNICAL SPECIFICATIONS

ENG

Axel Technology srl www.axeltechnology.com TECHNICAL

SPECIFICATIONS

22

Alternatively you should disconnect all connectors from the device during a storm or when the
device is going to be unsupervised or not used for a longer period of time. These measures will

protect against damage by lightning or excess voltage.

13 TECHNICAL SPECIFICATIONS

AUDIO PROGRAM IN / OUT

LINE INTERFACE

Connectors

Jack stereo 6.3 mm,.

Connector

RJ11

Input impedance

4 KOhm (transformer bal)

Nominal input level

- 6 dBm

Output level *

-inf to + 7 dBm

Nominal output level

- 6 dBm

Output impedance

2 KOhm (transformer bal)

Compensation mode

electronic

Noise on Receive output

less than - 80 dBm (DIN nois e)

Impedance

600 Ohm

Send / Receive separation

less than 20 dB**

GENERAL DATA

REMOTE INTERFACE

Power Supply

Powered by telephone line

Ext signaling for incoming call

optocoupled

Dimension

44 x 106 x 114mm

Remote line hooking

relay closure, ext. powered

Weight

430 g

* nominal line level : - 6 dBm

** it can vary depending on characteristics of telephone line

All measurements are intended at 1 kHz.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

WEEE Directive – Informativa RAEE

ENG

Axel Technology srl www.axeltechnology.com WEEE Directive – Informativa

RAEE

23

14 WEEE Directive – Informativa RAEE

In line with EU Directive 2002/96/EC for waste electrical and electronic equipment
(WEEE), this electrical product must not be disposed of as unsorted municipal waste.
Please dispose of this product by returning it to the point of sale or to your local municipal
collection point for recycling.

In Übereinstimmung mit der Richtlinie 2002/96/EG des Europäischen Parlaments
und des Rates über Elektro- und Elektronik-Altgeräte (WEEE) darf dieses Elektrogerät
nicht im normalen Hausmüll oder dem Gelben Sack entsorgt werden. Wenn Sie dieses
Produkt entsorgen möchten, bringen Sie es bitte zur Verkaufsstelle zurück oder zum
Recycling-Sammelpu nkt Ihrer G emein de.

Conformément à la Directive 2002/96/EC sur les déchets d’équipements électriques et électroniques (DEEE), ce produit
électrique ne doit en aucun cas être mis au rebut sous forme de déchet municipal non trié. Veuillez vous débarrasser de
ce produit en le renvoyant à son point de vente ou au point de ramassage local dans votre municipalité, à des fins de
recyclage.

In navolging van richtlijn 2002/96/EG van het Europees Parlement en de Raad betreffende afgedankte elektrische en
elektronische apparatuur (AEEA) mag dit elektrische product niet als ongescheiden huisvuil worden weggedaan. Breng
dit product terug naar de plaats van aankoop of naar het gemeentelijke afvalinzamelingspunt voor recycling.

In ottemperanza alla Direttiva UE 2002/96/EC sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE), questo
prodotto elettrico non deve essere smaltito come rifiuto municipale misto. Si prega di smaltire il prodotto riportandolo al
punto vendita o al punto di raccolta municipale loc ale per un opport uno ric icl agg io.

De conformidad con la Directiva 2002/96/CE de la UE sobre residuos de aparatos eléctricos y electrónicos (RAEE), este
producto eléctrico no puede desecharse con el resto de residuos no clasificados. Deshágase de este producto
devolviéndolo al punto de venta o a un punto de recogida municipal para su reciclaje.

I henhold til EU-direktiv 2002/96/EF om affald af elektrisk og elektronisk udstyr (WEEE) må dette udstyr ikke bortskaffes
som usorteret husholdningsaffald. Bortskaf dette produkt ved at returnere det til salgsstedet eller til det lokale
indsamlingssted, så det kan genbruges.

I linje med EU-direktiv 2002/96/EG om avfall som utgörs av eller innehåller elektriska eller elektroniska produkter
(WEEE) får denna elektriska produkt inte bortskaffas som osorterat kommunalt avfall. Bortskaffa den i stället genom att
lämna in den på försäljningsstället eller din lokala återvinningsstation.

EU:n sähkö- ja elektroniikkalaiteromudirektiivin (2002/96/EY) mukaisesti tätä elektroniikkalaitetta ei saa laittaa
lajittelemattoman yhdyskuntajätteen sekaan. Hävitä laite palauttamalla se ostopaikkaan tai viemällä se
elektroniikkaromun keräyspisteeseen.

De acordo com a Directiva Europeia 2002/96/EC sobre resíduos sólidos de equipamento eléctrico e electrónico (WEEE),
este produto eléctrico não pode ser deitado fora juntamente com o lixo municipal indiferenciado. Por favor, no final da
vida útil deste produto, devolva-o ao estabelecimento de aquisição, ou entregueo no local de recolha apropriado para
reciclagem designado pelo seu município.

V souladu se smrnicí EU . 2002/96/ES o odpadních elektrických a elektronických zaYízeních (OEEZ) se tento elektrický
výrobek nesmí likvidovat jako netYídný komunální odpad. PYi likvidaci tento výrobek vrat‘te prodejci nebo ho odevzdejte
k recyklaci do komunálního sbrného zaYízení.

Vastavalt EL direktiivile 2002/96/EÜ, mis käsitleb elektri- ja elektroonikaseadmete jäätmeid (WEEE), ei või antud toodet
visata majapidamisjäätmete hulka. Palun tagastage antud toode taaskasutamise eesmärgil müügipunkti või kohaliku
piirkonna jäätmekogumise punkti.

V súlade so smernicou 2002/96/ES o odpade z elekrických a elektronických zariadení (OEEZ) sa toto elektrické
zariadenie nesmie odstranovat‘ ako netriedený komunálny odpad. Výrobok odstránte jeho vrátením v mieste nákupu
alebo odovzdaním v miestnom zbernom zariadení na recyklovanie.

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

WARRANTY

ENG

Axel Technology srl www.axeltechnology.com WARRANTY

24

15 WARRANTY

The manufacturer offers a 1-year ex works warranty. Do not open the equipment. The warranty shall be voided if any of
the warranty seals are broken. The manufacturer shall not be liable for damage of any kind deriving from or in relation to
incorrect use of the product.

16 DECLARATION OF ROHS CONFORMITY

To minimize the environmental impact and take more responsibility to the earth we live, in accordance with European
Union Directive 2002/95/EC, known commonly as RoHS (Restriction of Hazardous Substances),

We herewith declare,

Axel Technology srl
Via Caduti di Sabbiuno 6/F
40011 Anzola Emilia – Bologna - Italy

that the product listed below complies with the requirements of Directive 2002/95/EC, Article 4, paragraph 1 with
reference to hazardous chemical substances:

Lead (Pb)

Hexavalent Chromium
(CrVl)

Mercury (Hg)

PBB (Flame Retardant)

PBDE (Flame Retardant)

Cadmium (Cd)

Product Description: BOXTEL

Authorized Company Representative:

Title of Signatory:

Date:

Christian Sighinolfi –
Technical Manager

31 October 2011

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl

AXEL TECHNOLOGY IN TOUCH

ENG

Axel Technology srl www.axeltechnology.com AXEL TECHNOLOGY IN

TOUCH

25

17 AXEL TECHNOLOGY IN TOUCH

Main Office BOLOGNA: Via Caduti Di Sabbiuno 6/F

40011 Anzola Emilia - Bologna - Italy

Tel. [phone] - Fax. [phone]

Regional Office BERGAMO: Via Italia 1 –

24030 Medolago (Bg) – Italy

Tel. [phone] - Fax. [phone]

[e-mail]

Audiofan Pro Sp. z o.o. 02-495 Warszawa , ul.Regulska 5 tel.[phone] tel. [phone] fax. [phone] www. audiofan.pl www.audiofan24.pl