American Weigh Scales, Inc.
AMW-13
D i g i t a l T a b l e t o p S c a l e
e
r
Ta
e
d
o
M
d
l
o
H
F
F
O
/
g
N
O
AMW-13
User Manual
AMW-13 Manual
Thank you for purchasing the American Weigh
AMW-13 digital tabletop scale. Please read all
operating instructions carefully before use. This
electronic scale is a precision instrument. With normal
care and proper treatment, it will provide years of
reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimate to
normal room temperature for at least one hour before
use. Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto tray top. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. OPERATION
Place Scale on a horizontal at surface.
1. Press [ON/OFF] key.
2. Wait until "0.0” is displayed.
3. Put the object(s) on the weighing platform.
4. Using the [MODE] key, you can switch between the
weighing units.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press [TARE] and wait until "0.0" is displayed.
4. Add the "net-weight-item".
III. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
Battery-Symbol, [lo]
Change the batteries.
[OUE2] Recalibrate the scale as shown above.
[EEEEE] You are overloading the scale. Remove the
excessive load immediately!
[UNST] Use the scale in a more stable position
(inches)
Scale Dimensions
(inches)
Power
Gross Weight
one 9V Battery (included) or AC-Adapter (sold seperate)
6 x 6 Stainless Steel
6.2 x 7.2 x 1.6
1.69 lb
Resolution
Weighing Units
Display
Platform Dimensions
grams (g), pounds / ounces (lb/oz)
5 - Digit Backlit LCD
1g / 0.1oz
Model
Capacity
6000g / 13lb
AMW-13
Specications
Loading...