Awind WPS-710 Install Guide

Wireless Presentation System

Quick Installation Guide

(Model Name: WPS-710)

Version: 1.00

Date: June 12, 2007

WPS-710 Quick Installation Guide Awind Inc.

1. Package Contents

z WPS-710 Box
z Power Adapter (DC +5V, 2.5A)
z CD-ROM with User’s Manual inside.
z Quick Installation Guide
z Warranty Card

2. Physical Details

z Front Panel

LAN LED POWER LED

WLAN LED

z Rear Panel

Power Jack

Power Switch

VGA Connector

RJ-45

Reset to Default button

Antenna

3. Installation

1) Connect power adapter DC plug to WPS-710 DC jack and other side to AC

jack..

- -

2

WPS-710 Quick Installation Guide Awind Inc.

2) Connect Projector’s VGA cable to WPS-710 VGA connector on the rear

panel.

3) Turn on projector.

4) Turn on WPS-710 box
♦ After system ready, the “POWER” LED and “WLAN” LED will be

yellow color. The “LAN” LED will be off.

♦ When LAN connection is established, then “LAN” LED will be

yellow color and blinking while data transmission.

4. Setup

1) If you see below picture on the projector screen menu, it indicates your WPS-710
box is ready now.

- -

3

WPS-710 Quick Installation Guide Awind Inc.

2) Make sure your PC WLAN card is enabled..

3) Connect your PC to WPS-710 box.

♦ Connect PC WLAN card to WPS-710 box, as below.:

4) Open browser directly, or enter the IP address to get in WPS-710 web home page.

♦ The default IP address is 192.168.100.10
♦ Or refer to the IP address which shown on the projector screen.

5) After you get Home page successfully, then below screen shown up.

- -

4

WPS-710 Quick Installation Guide Awind Inc.

6) Click on “Download Software”, and execute the installation program.

♦ Press “Login” button to download software, the default password is blank.
♦ You may execute this program directly or save it and then perform it later.
♦ After install the program, this software shortcut comes out on the PC screen.

- -

5

WPS-710 Quick Installation Guide Awind Inc.

7) Make sure your personal firewall allows WPS-710 software to pass through.

z When you see below dialog box, just click “Unblock” to allow firewall to

add this program on the exception list automatically.

8) After you installation completed, this program will execute directly and search
WPS-710 box automatically, when box founded then a “LOGIN CODE” dialog
box comes out. Just enter the LOGIN CODE to start projection !

♦ You can see login code on the projector screen.

- -

6