Award AGE152CT User Manual

Download

COMBINED FREESTANDING

AGE152CT

OVEN

USERS MANUAL

AGE51 - AGE52

AGE52CT - AGEC52CT

Valued Customer

manual

It is our goal to offer product which more than meets your expectations by carefully producing them in modern facilities with proven quality, and test standards second to none.

This manaul has been prepared in order to help you use your new appliance which has been manufactured by the most recent technology, with confidence and maximum efficiency.

Before using your new appliance, carefully read this manual which also includes the basic information for correct and safe installation. Shoud any maintenance be required please contact your nearest authorised sevice agent for assistance.

CONTENTS

1- Presentation and size of product 2- Warnings 3- Installation and preperation for use 4- How to use your product(cooker) 5-Cleaning and maintenance 6- Service and Transport

PART 1: PRESENTATION AND SIZE OF PRODUCT

PRESENTATION:

Part of List:

1- Cooktop Cover 2- Cooktop 3- Control Panel 4- Oven Door Handle 5- Drawer Cover 6- Supply leg 7- Oven Door 8- Oven Tray 9-Wire Grid

10- Grill Broiler 11- Oven Lamp 12- Semi-Rapid Burner 13- Rapid Burner 14- Auxillary Burner 15- Hobe Grids 16- Se

mi-Rapid Burner

17-

Hotplate

MODEL

YK 56 YK 66

SIZE(cm)

50*60*85

60*60*85

50*60*90

60*60*90

PART 2 : WARNINGS

TAKE ALL IMPORTANT SECURITY MEASURES AND READ THE MANUAL COMPLETELY BEFORE USING THE APPARATUS

This apparatus has been designed for non-professional, domestic use only.

Surely control whether there is any damage after you unpacked the apparatus. If there is any defect; do not use the apparatus and immediately contact to the authorized maintenance service. As the materials used for package ( nylon, stapler, strafoam. . etc. ) may cause harmful effects to children, they should be collected and removed immediately.

The apparatus must be set up by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement.

Before connecting your apparatus to the electric and gas network, carefully control whether it is appropriate for the features determined on the package and/or data plate on the apparatus.

Compare the features of the electricity network with the technical information on the presentation label before plugging the apparatus in.

If you will not use the apparatus for a long time, plug it off. Keep the main control switch off. Also when you do not use the apparatus, keep the gas tap off.

The feeding cable must never be changed by the customer. When it is damaged by any reason, please contact to your authorized service.

Before changing the ovens lamp, plug it off.

Turn the apparatus off before the operations such as cleaning or maintenance. You can do it after plugging it off or turning the main switches off

Some parts of apparatus may hold its heat for a long time, it is required to wait for it to cool before touching onto the points that are exposed to the heat directly.

When you first run your oven a certain smell will be emanated arising from the insulation materials and the heater elements. For this reason, before using your oven, run it empty at maximum temperature for 45 minutes. At the same time you need to property ventilate the environment in which the oven is installed.

The use of a gas cooking appliance results in the production of heat and moisture

This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

in the room in which it is installed. Ensure that the kitchen is well vantilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood)

Prolonged intensive use of the appliance may call for additional ventilation, for example opening a window or more effective ventilation; for example increasing the level of mechanical ventilation, where present.

Do not keep flammable materials close while the apparatus is operating.

Pay attention to the cables of the other electrical devices operating near the apparatus, so as not to touch to hot points

Pay attention the switches to be 0, when the apparatus does not operate.

Glass lids may shatter when heated. Turn off all burners before shutting the lid.

This manual is prepared for more than one model in common. Your cooker may not have some of the features that is explained in manual. Pay attention to the expressions that have figures, while you are reading the operating manual.

Keep children away from the oven.

During the use the appliance gets hot. Take special care to prevent touching of heating elements inside oven cavity.

During grilling mode the oven door should be closed.

Do not use steam cleaners for cleaning the cooking hobs and oven cavity.

Before opening the lid covering the hotplates, take care that no liquids are on the top of the lid. The lid is to closed not earlier than hobs have been cooled down.

Take care that the lid is in correct position under operation.

Do not place any cooking container on the oven floor when oven in use. Do not put tin foil paper on oven floor when oven is use. To do this will result in damage to the oven liner body.

FOR EFFICIENCY AND SECURITY OF APPARATUS, WE RECOMMEND YOU ALWAYS TO USE THE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICES WHEN IN CASE OF A NEED.

PART 3 : INSTALLATION AND PREPARATION FOR USE

This modern, functional and practical oven, that was manufactured with the most quality parts and materials, will meet your needs in every respect. You must surely read this manual in order not to have any problem in future and to be able to have successfull results. The following information are the required rules for right installation and service processes. It must be read especially by the technician who will install the apparatus.

Contact To Authorized Service For Mounting Of Your Oven.

3.1 ENVIRONMENT WHERE YOUR APPARATUS WILL BE INSTALLED

Your oven must be set up and used in a place where it will always have ventilation. While operating, this appliance needs 2m3/h air per kw input. There must be a natural ventilation enough to provide the gas to be used in the environment. The average air flow must directly come in through the air holes that will be opened on the walls that are opened towards outside.

Air inlet section min. 100cm

Figure 1 Figure 2

These air holes must have at least the cross section of 100cm transition (One or more air holes can be opened.) (Figure1-2) This hole (or holes) must be opened both from the inside and from the outside as it/they will never be clogged and preferably must be placed close to the bottom and at opposite side of the smokes of the burned gases that were emptied. If it seems not possible to open these ventilations in the place where the apparatus is set up, the needed air can also be obtained through the next place in condition that this place must not be the bed room or a dangerous place and also it must be ventilated as required.

that is effective for air

Emptying of the Burned Gases from Environment

The cooking apparatuses that operate with gas, throw the burned gas wastes out directly to the outside or through the extractor hoods that were connected to the ventilator flue. If it seems not possible to install a rangehood, it is required to set an electric fan onto the window or wall that is opened to the outside. This electric fan must have the capacity to change the air of the kitchen environment 3-5 times of its own volume of air per hour (Figure 3-4)

Cooker hood flue

Electrical ventilator

Air inlet section min. 100cm

figure 3

Min. 42 cm.

Min. 60 cm.

COOKER HOOD

Min. 65 cm.(with hood)

Min.70 cm(without hood)

Min. 42 cm.

Air inlet section min. 100cm

figure 4

figure 5

3.2 INSTALLATION OF OVEN

There are some factors that must be paid attention to while installing your oven. Surely pay attention to our below suggestions in order to prevent any problems and/ or dangerous situations that may arise later. The cooker can be placed close to other furniture on such a position that in the area where the oven is set up, the furnitures height must not exceed the height of the cooker panel. Pay attention not to place it near the refrigerator, there must be no flammable or inflammable materials such as curtain,

waterproof cloth,.....etc. that will begin to burn quickly, while selecting place for oven.

It is required there must be least 2 cm blank space between the back cover of oven and wall for air circulation. The furniture close to oven must be manufactured resistans to heat more than 500C of the room temperature. If the kitchen furniture are higher than the pan which the ovens cookers are on, it must be at least 11cm away from the ovens side. The minimum heights from the ovens pan and wall cupboards and cooker hoods with fan over the oven, are shown as below. Thus, the extractor hood must be at minimum 650mm height from the cooker pan (Figure 5) If there is no cooker hood, this height must not be less than 700mm.

3.3 ADJUSTMENT OF FEET

Your oven stands on 4 adjustable feet. As the feet are adjusted in low location, it is required to control whether it is balanced before installing the oven. You can make this adjustment as turning the feet clockwise if required. It is possible to raise the apparatus maximum 15mm via the feet. If the feet are adjusted appropriately, it is required not to

move the apparatus by dragging, otherwise it is required to place it by lifting it up.

3.4 MOUNTING OF GAS HOSE AND IMPERVIOUSNESS CONTROL

The gas of apparatus must also be connected in accordance with standards. The adjusted gas type of apparatus must be determined on the type signboard on the back of the apparatus. You can find the information related to appropriate gas types and appropriate gas injectors on technical data table. Pay attention that the feeding gas pressure must be appropriate for the values on technical data table to be able to get the most efficiency and to ensure the least consumption. If the pressure of used gas is different than these values or changeable, it is required to affix an available pressure regulator on the entrance pipe. It is surely required to contact to the authorized service to make these adjusments.

The plastic hose that is fixed onto the gas entrance of apparatus with a pipe collar, must

The tightening pipe collars must be clear of rust.

be used while connecting for Butane-Propane gas. Connect your apparatus with a short and impervious hose as much as possible to the gas resource. The hoses permitted maximum lenght is 1.5m. The hose that brings gas to the apparatus must be changed (1) once a year for your security.

The points that must be paid attention while connecting the hose;

No parts of the hose must not touch to any place that has heat more than 500C. The lenght of hose must not exceed 1.5m. The hose must not be ruptured, be tightened or be folded. The hose must not touch to the sharp corners, moving things, must not be defective. The hose must be controlled from end before mounting, it must be observed whether there is any production defect. As gas is turned on, all connection parts and hose must be controlled with prepared much bubbly water at first after the gas entrance connections are completely finished. Never use a lighter, match,...etc while making this process. The tightening pipe collars must clear of rust. The expirence dates must not have exceeded over 5 years. As affixing an end of hose to the detector, other end to the gas entrance adaptor of oven tightly, hold it with a sheet iron pipe collar and screwdriver very tightly. If no connection is made with hose in limitation of conditions that were explained above, flexible metal hose can be used. It is required to contact to the authorized service to be able to connect appropriately at security standards on this condition and a technician must do this connection. Your oven is adjusted to operate by LPG. If it is required to be operated by NG gas, contact to the nearest Authorized dealer. While gas is being connected for NG gas, on the gas entrance of apparatus,hose connection apparate as described in Figure must be used and it must be connected by a technician (Figure 6). The flexible hose must not touch the sharp places and there must be no damage.

ATTENTION!!! Surely do not use any match and lighter for control of gas leakage.

Figure 6

GAS CONVERSIONS

Caution : The following procedures must be undertaken by authorized service personel.

Changing Injectors of Gas Hobs :

The gas burners adapt to different types of gas, by replacing the corresponding injectors to gas on use.

For this purpose, following steps should be performed. Cut off the feeding gas flow and electric current. Remove the cap and the adapter (Figure 7). Unscrew the injectors (Figure 8) Replace the injector with the ones corresponding to the type of gas that is going to be used, according to the information chart.

Figure7

Figure8

Adjusting The Reduced Flame Position :

The gas inlet of this product is on the right side of the appliance. If connection point needs to be moved to the left side of the appliance, you can request an extension pipe from your authorized service.

For reduced flame position the by pass screw must be loosened in transformation from LPG to NG. In transformation from NG to LPG, the same screw must be fastened. Make sure that the appliance is unpluged from the electric current and the gas feed is open.

Ignite the burners and leave them on in minimum position. Remove the knobs because the screws are accesible only when the knobs are removed. With the help of a small screwdriver fasten or loosen the by pass screw 900, which makes the flame of the burner come down to the minimum (Figure 6).

When the flame has a length of at least 4mm, the gas is well distributed. Make sure that the flame does not die out when passing from the maximum position to the minimum position.

Changing the Gas Inlet :

During connections always keep the nut on the gas manifold fixed, while rotating the counter-part. Use spanners of appropriate size for safe connection. For all surfaces between different components, always use the seals provided in the gas conversion kit. The seals used during connection should also be approved to be used in gas connections. Do not use plumbing seals for gas connections.

Remember that this appliance is ready to be connected to gas supply in the country for which it has been produced. The main country of destination is marked on the rear cover of the appliance. If you need to use it in another country, any of the connections in the figure below can be required. In such a case, contact local authorities to learn the correct gas connection.

It is required to call the authorized service to be able to make the gas connections appropriately and in compliance with safety standards.

ATTENTION! Surely do not use any match or lighter for control of gas leakage.

Gas Pipe

Seal

Hose Fitting

Gas Hose with Collar

Gas Pipe

Seal

Hose Fitting

Mechanical Gas Hose

Gas Pipe

Seal

Hose

Fitting Gas Hose with Collar

Gas Pipe

Hose Fitting

Mechanical Gas Hose

Gas Pipe

Seal

Hose Fitting

Mechanical Gas Hose

Figure 4

3.5 ELECTRIC CONNECTION AND SECURITY

During the electric connection, surely follow the instructions bellow:

The earthing cable must be connected to the earth terminal ( ). If there is not any appropriate earthed electric outlet in accordance with regulations in the place where the apparatus will be installed, immediately contact to our Authorized Service. The electrical connection must be made as the figure below.

The earthed electric outlet must be close to the apparatus. Surely do not use the extension cord.

The feeding cable must not touch to the hot surface of the product.

In case the feeding cable is damaged, surely contact to Qualified Service. The cable must be changed by the Authorized Service.

The wrong electric connection may damage your apparatus. Such damage is not in guarantee extent.

The apparatus is adjusted as appropriate for 220-240 Volts of electricity. If the network electricity is different than this informed value, immediately contact to our authorized service. The electric cable must not touch to the hot parts of apparatus. The electric cable must not touch the back part of the apparatus. Otherwise the electric cable of apparatus may be damaged. And this situation may cause short circuit.

The producer firm declares that it has no responsibilty against any kind of damages and losses that emanate from the following security norms.

BROWN

YELLOW+GREEN

Type power supply cord must be used.

3X1.5 mm , H05V V-F

Grounding lead must be connected

to screw with symbol.

BLUE

3.6 GENERAL WARNINGS AND MEASURES

Protect

WARNINGS :

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.

- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.

- For hobs, the appliance is not intended to be operated by means of an external timer or separate remote-control system.

Your apparatus is produced in accordance with the related security instructions connected with electrical apparatus. The maintenance and repair works must be made just by the Authorized Service technician who is trained by the producer firm. The installation and repair works without following rules may endanger you.

Its outside surfaces heat while your apparatus operates. The interior surfaces of oven, components that ensures the heat and steam that goes out are quite hot. Even if the apparatus is turned off, these parts hold its heat for a specific time. Do not touch onto the hot surfaces. Keep children away.

Do not leave the cooker while cooking with solid or liquid oils. There may be flaming up on condition of extreme heating. Never pour water to the flames occuring from oil. Cover the saucepan or frypan with its cover in order to choke the flame that was occured in this case and turn the cooker off.

The oven and heat adjustment switches must be adjusted and ovens clock must be programmed for cooking in your oven. Otherwise the oven does not operate.

Do not leave anything on it when the door or drawer of oven is open. You may unbalance your apparatus or break the cover.

Do not put heavy things or flammable, burnable goods(nylon, plastic bag, paper, cloth....etc)

into the lower drawer.

Turn it off when you do not use the apparatus and keep the gas valve off.

Product your apparatus against atmospheric effects. Do not leave it to effects such as sun, rain, snow, powder...etc.

PART 4 : USE OF YOUR OVEN

4.1 USE OF COOKERS CONTAINING GAS

Surely and carefully read the instructions that are enriched with

IMMEDIATE Ignition System in Cookers

Some models have immediate ignition system on cookers. You can easily recognize them via the turning on spark plugs. To operate the system; it is required to press slightly onto the switch marked with its symbol, as turning the switch of the cooker that you want to turn on opposite to clockwise. In order to obtain the most efficiency from the cookers, pay attention to the sizes of saucepans that you put the on the cookers and the sausepans to have flat bases. Do not use concave and convex based saucepans. Pay attention to use saucepans that have sizes determined in figure. If the dishes that have less than 14cm diameter, use a coffee pot carrier.

pictures for your use of convenience and to be able to get the most efficiency from your apparatus.The signs on the control switches, states that which cookers are turned on by them. Use your electrical lighter or match to turn on any cooker containing gas. Press onto the switch, turn to maximum at the opposite of clockwise. Each cooker can operate at maximum, minimum, moderate and powers among them. These positions are shown with maximum and minimum signs apart from off 0 position on switches. You can adjust to wished location by turning the switch from off position opposite to clockwise and carrying it out in a suitable manner to the signs. Also, to turn off the apparatus, it is required to turn the switch clockwise and until it stops (It stops at 0 location).

Gas Flame Failure Device (FFD) (If Your Product Has This Feature)

Gas flame failure device is used for every flammable gas in order to prevent the gas leakage by the result of turning on the gas taps by the children randomly or dying down that may occur by the result of overflowing of liquidover the burners. Turn the switch opposite to clockwise onwards. This situation will ignite automatically one after another. After the turning on, when the switch is held on pressed location for approximately 3 seconds as pressing forward until the point where the switch reaches, the thermic component senses the cookers flame and opens the gas way. At dying out that may be because of overflowing of liquid and such reasons, the thermic unit senses the loss of heat and cuts off the gas way in a time period less than 90 seconds.

22-26 cm

(rapid - Wok burners)

20-22 cm

12-18 cm

4. 2 USE OF ELECTRICAL COOKERS

The electrical cooker is commanded by 7 graded switches. 0 of the grades is off location. The use fields in response to other 6 grades are below.

1..........Keeping hot location

2-3......Heating locations at low heat

4-5-6..Cooking - roasting and boiling locations

The upper part of electrical cooker is covered by a protective material resistant to heat. Turn the switch of the electrical cooker to 3 and then operate the cooker for 5 minutes in order to burn and so to toughen the protective layer at first use. During use of electrical cookers, it is required to pay attention to the used saucepans to have smooth bases. If appropriate sized and smooth based saucepans are used, you can get the most efficiency from your cooker. It is not suggested to use the little size saucepans on the big size cooker, because this will cause heat loss and so energy will be wasted.

RIGHT

WRONG

circular saucepan base

WRONG

small saucepan diameter

WRONG

saucepans base is not settled

WARNING

When the electric cooker button is brought to another position than the 0 position,the electric burner warning light will be on. Use only pots which fit the burner diameter. Before placing the pot on the burner, be sure that its bottom is not wet. Never operate electric cookers while empty. Pot temperature may be high when the appliance is in use. Therefore, it is recommended that you keep children and pets away from the hob both during and after operation. In case you notice any crack on the electric cooker, it must be immediately switched off and replacedby the Authorized Service. After use (in oder to ensure its continuously effective operation and long service life), your electric cooker needs to be thoroughly cleaned using appropriate cleaning materials. In order to prevent any formation of rust and preserve their initial appearance, it is recommended to clean the cookers rubbing them with a piece of cloth that is slightly damped by oil. Never use steam cleaners.

4.3 THE OVEN PART OF THE APPLIANCE:

Oven Function Control Button :

For you to select the oven functions .Explained in the next Part and in Table 1. You need to adjust the function selection button and the oven thermostat button together to a temperature value you wish to select. Otherwise, the function stage you selected will not operate.

Oven Thermostat Button:

For you to select the oven temperature (Figure 4). Used together with the oven function control button. When the temperature inside your oven reaches the value you set, the thermostat will cut the circuit and the thermostat light will go off. When the temperature falls

Max

below the set value,the thermostat will again be turned on and the thermostat light will be on.

4.4 USE OF OVEN FUNCTION SWITCHES

This switch allows you to select the oven functions. The functions and their grades are shown at the following table. Also, the detailed instructions and their uses will also be explained in details in the next pages.

Your ovens lamp starts to operating.

Your ovens lamp, red warning lamp and fan start to operating. It performs the function of defrosting your frozen food.

Your ovens thermostat and warning lamps and lower and upper heaters start operating.

Your ovens thermostat and warning lamps and turbo heater, fan are put into use.

Your ovens thermostat and warning lamps and fan, upper and lower heaters start operating.

Your ovens thermostat and warning lamps and grill heater function start operating.

Your ovens thermostat and warning lamps and upper heater, grill heater functions start operating.

Your ovens thermostat and warning lamps and upper heater, grill heater and fan functions start operating.

100

250

200

150

Table 1

Your ovens thermostat and lamps, lower heater operate

Your ovens thermostat and warning lamps, turbo heater, lower heater and fan start operating.

Your ovensthermostat and warning lamps,lower heater and start operating.

Ice Melter Function ( Defrost )

You can start the defrosting process by placing the frozen food into your oven and turning the switch onto the determined sign. This is a program that does not cook the food, just helps to defrost them in a very short time. Place the food that will be defrosted on the third shelf support from the bottom, on a wire shelf. Place a tray into the bottom of the oven in order to collect the water that occurs because of defrosting.

Lower - Upper Heater Function ( Static Cooking )

At this cooking that is defined as the traditional method, the heat that is spreaded from the lower and upper heating elements into your oven equally, ensures the foods buttom and top to be cooked equally.

It is recommended to make pre heating for 10 minutes. Leave the food that was put into

the available cooking dish to be cooked in recommended period case. The Lower-Upper Heater location is the function that is preferred to cook cake, sponge cake, flan, spaghetti in oven, lasagna, pizza. At the end of cooking process, turn the ovens switch and heat set up switch off and cancel the time program. Take the cooked food from the oven, put onto a safe place and open the ovens door and ensure the oven is cool completely. As the oven will be hot at that moment, stay away from the oven and keep your children away from the oven.

Fan and Lower - Upper Heater Function ( Static Cooking with Fan)

The location where the air comes from lower and upper heating elements is distributed into the oven via the fan motor and fanner. The heat adjsutment switch is adjusted to the degree that is recommended at the cooking table. Turn the ovens switch as it will show the symbol of this function and the ovens time is adjusted to the recommended time for cooking, the oven is pre heated for 10 minutes. The food that had been put into the available cooking dish is placed into the oven and then cooked. In general, this location is a location where a very nice results are taken for cooking of pastries. Every part of the food will be cooked equally at this location. It is appropriate for cooking of single tray. At the end of cooking, turn off the ovens switch and heat adjustment switch. Cancel the ovens time program and take the cooked food from oven and leave it on a safe place. Open your ovens lid and leave it to cool. Do not come close to it until it cools and keep children away.

Turbo Fan Function

Turbo fan function spreads the ovens heat equally. The food on all shelves will be cooked equally during the use of this function. Top of the oven will not be hotter than the bottom of it. Adjust the heat adjustment switch of your oven to the wished degree, also turn the function switch as it will show Turbo function symbol. Place your food that had been put into the available cooking dishes into the oven after pre heating of 10 minutes. This function is appropriate for cooking more than one dish. If you have two trays of food that you will cook in your oven; you must use that heat for your oven, heat of which of the heats that are appropriate for your food while adjusting the cooking heat. Cooking two trays of food requires additional cooking period according to the single tray cooking. In general, food in two trays are not cooked at the same time. So, take the tray that you observed that is cooked, from the oven, go on cooking for the other tray of food. As there will be heat transfer between two trays during the cooking of two trays of food, the cooking quality will be lower than the single tray. While cooking double trays, you can get a better cooking result by changing theplaces and ways of trays if needed. The processes that will be applied at the end of cooking, are same for all the functions.Open your ovens cover and leave it to cool after you put your trays in oven onto a safe place.

Turbo Fan and Lower heater Function

Turbo fan and lower heater function is an ideal function to cook pizza. The lower heater ensures the pizza paste to be cooked while Turbo fan spreads the heat of oven equally. Adjust the heat adjustment switch of your oven to the wished degree, also turn the function switch as it will show this functions sign and adjust the ovens time to the offered time for cooking and pre heat the oven for 10 minutes. This function is appropriate for cooking of one dish. At the end of cooking process, turn off the ovens switch and heat set up switch. Cancel the ovens time program and take the cooked food from oven and leave onto a safe place. Open your ovens door and leave it to cool. Do not come close to the oven until it cools and keep children away.

Warning: Max. set of thermostat 190

Grill Function

This function is used to grill.To grill, place the food onto the grid. The grid should be placed onto the shelf at toppest level. You can start to grill after placing the oven tray onto the 3rd shelf. The tray that is placed onto the 3rd shelf will ensure the collection of oils that drop from food.

Turn your oven function selector switch as it will show the sign of this function. Place your food into the oven after pre heating of 5 minutes. At the end of cooking, as in all other cooking processes; turn off the ovens switch and function selector switch. Cancel the ovens time program and take the cooked food from oven and leave onto a safe place. Do not come close to the oven until it will cool and keep children away.

Warning: Max. set of thermostat 190

Upper heater, Grill Function

This function is used to grill rapidly. In order to operate, you can follow the instructions explained in previous grill function section.

Grill and Fan Function

In this function, grill heater, upper heater and the fan that ensures to roast perfectly, operate together. In order to operate, you can follow the instructions explained in previous grill function section.

Lower Heater Function

At this cooking the best is spreaded from the lower heating element. Lower

heating function is appropriate for heating the food instead of cooking.

Lower Heater and Fan Function

At this cooking, the heat is spreaded from the lower heating element and fan

motor. This function can be used to heat the food equally in a short time.

4. 5 Accessories Used in Oven

You can use glass dishes, cake molds, special oven trays that are appropriate for use in oven, that you are able to assure in market, apart from the oven trays and grill wire chicken roasting skewer that are given together with your oven. Pay attention to the information related to the subject that were given by the manufacturer firm. In case small size dishes are used, place the dish onto the grill wire, as it will completely be on the middle part of the wire. The following information must also be followed for the enameled dishes. If the food that will be cooked does not cover the oven tray completely, if the food is taken from the deep freezer or the tray is being used for collection of foods juices that flow during grilling, the form changes can be observed in tray because of the high heat that occur during cooking or roasting. The tray will return to its old form only when the tray cooled after cooking. This is a normal physical event that occurs during heat transfer. Do not leave this tray or dish in cold environment right away after cooking in glass tray or dish. Do not put onto the cold and wet grounds. Place on a dry kitchen cloth or dish cross, ensure it to cools slowly. Otherwise the glass tray or dish may be broken. If you will grill in your oven; we recommend you to use the grill that was given in tray together with product. ( If your product includes this material ) So, the oils that spatter and flow, will not dirty the inside of oven. If you will use the big wire grill; put a tray onto one of the lower shelves for oils not to be collected. Also put some water into it for cleaning easiness. Use 4th and 5th shelves while grilling and oil the grill for the ingredients that you will grill not to stick to the grill.

Using the Mechanic Timer :

Manual Operation

100

When you bring the

Timerbutton to the

position indicating M

as shown on the picture is in 0 position the

oven will operate.

Using the Digital Timer :

Time Adjusted :

The time must be adjusted before starting to use the oven. Following

MODE

the power supply to the oven, the symbol (A) and the three0 s on the screen will begin to flash. Press the (+) and (-) keys simultaneously. The symbol will appear on the screen. Also, the dot in the middle of the screen will begin to flash. Using the (+) and (-) keys, adjust the days time while this dot is flashing. After the adjustment,it should be

expected that the dot will be lit continuously.

Operating by Adjusting the Time

Rotate the timer button clockwise to a certain time range between 0-100 minutes, as shown on the picture. The oven will stop when the set time range is

100

completed, and the timer will give an audible warning once.

Mechanical Minute Minder

Set the desired cooking time by turning timer button clockwise.

At the end of this time period, timer will make a beep sound but the oven continues working. In order to turn the oven off, you must take the switch and thermostat of the oven to closed position.

Following the power supply to the oven, when the symbol (A) and the three 0 s on the screen begin to flash, the oven cannot be operated using the control buttons. When the (+) and (-) keys are pressed simultaneously for time adjustment, the symbol will appear on the screen. When this symbol appears on the screen, you can manually operate the oven part.

As the adjusted time will be reset in the event of a power failure, time adjustment operation will have to be performed again.

Audible Warning Time Adjustment :

MODE

The audible warning time can be set to a time between the time range of 0 and 23.59

When the time is up, the timer gives an audible warning and the symbol begins to flash on the screen. Pressing any key will stop the audible warning and the symbol disappears on the screen.

Audible Warning Time Adjustment is for Warning Purposes Only. The Oven will not be Activated at this Function.

on the screen. Also, three 0 s will appear. Adjust the desired time period for the warning by using (+) and (-) keys while the symbol is flashing. Some time after the completion of the adjustment, the symbol will begin to light continuously. When the symbol begins to light continuously, the audible warning time adjustment is done.

Press the MODE key in the middle. The symbol will flash

Semi-Automatic Programming According to Cooking Period :

This function is used to cook in the desired time range.

The foods to be cooked are put into the oven. The oven is adjusted to

MODE

A cooking period between the time range of 0 and 10 hours can be set.

the desired cooking function. The oven thermostat is adjusted to the desired degree depending on the dish to be cooked.

Keep pressing on the MODE button until you see "dur" on the timer screen. When you see "dur" on the timer screen, the symbol (A) will begin to flash. Adjust the cooking period for the food you wish to cook, by using the (+) and (-) keys while the timer is in this position. Some time after the adjustment operation is completed, the days time will appear on the screen and the symbols (A) and will begin to continuously light on the screen. While doing this, the oven will also start to operate.

At the completion of the set duration, the timer will stop the oven and give an audible warning. Also, the symbol (A) will begin to flash on the screen. After bringing the oven button and oven hermostat button to 0 position, pressing any button of the timer will end the audible warning. Also, the timer will be brought to manual use function.

Semi-Automatic Programming According to Finishing Time :

This function is used to cook according to the desired finishing time. The food to be cooked is put into the oven. The oven is adjusted to the

You can set a time which can be up to 10 hours after the days time.

At the completion of the set duration, the timer will stop the oven and give an audible warning. Also, the symbol (A) will begin to flash on the screen. After bringing the oven button and oven thermostat button to 0 position, pressing any button of the timer will end the audible warning. Also, the timer will be brought to manual use function.

MODE

desired cooking function. The oven thermostat is adjusted to the desired degree depending on the dish to be cooked. Keep pressing on the MODE button until you see "end" on the timer screen. When you see "end" on the timer screen, the symbol (A) and the days time will respectively begin to flash. Adjust the finishing time for the food you wish to cook, by using the

(+) and (-) keys while the timer is in this position. Some time after the adjustment operation is completed, the days time will appear on the screen and the symbols (A) and will begin to continuously light on the screen. While doing this, the oven will also start to operate.

Full-Automatic Programming:

This function is used to cook after a certain period of time, within a certain duration.The food to be cooked is put into the oven. The oven is adjusted to the desired cooking function. The oven thermostat is adjusted to the desired degree depending on the dish to be cooked.

When you see dur on the timer screen, the symbol (A) will begin to flash. Adjust the cooking period for the food you wish to cook, by using the (+) and (-) keys while the timer is in this position. Some time after the adjustment operation is completed, the days time will appear on the screen and the symbols (A) and will begin to continuously light on the screen.

First; keep pressing on the MODE button until you see dur on the timer screen.

A cooking period between the time range of 0 and 10 hours can be set.

Digital Timer Sound Adjustment : There are 3 different audible warning levels available. To choose between them, start with the timer showing the time of day. Press the “-“ (minus) button for 1-2 seconds and the timer will give an audible signal beep. At this stage, each time the “-“ button is pressed, the timer will sound the next audible warning (signal beeps) in the sequence. Once the desired sound is heard, do not press any further buttons, and the timer will save the last selected signal warning sound. This needs to be reset in the event of a power failure.

When you see "end" on the timer screen, the symbol (A) and the days time will begin to flash, with the addition of the set cooking period. Adjust the finishing time for the food, by using the (+) and (-) keys while the timer is in this position. Some time after the adjustment operation is completed, the days time will appear on the screen and the symbol (A) will begin to continuously light on the screen

You can set a time which can be up 23.59 hours after the time obtained by adding the cooking period to the days time.

The oven will start operating at the time calculated by deducting the cooking period from the set finishing time, and will stop at the set finishing time. The timer will give an audible warning and the symbol (A) will begin to flash. After bringing the oven button and oven thermostat button to 0 position, pressing any button of the timer will end the audible warning. Also, the timer will be brought to manual use function.

Second; keep pressing on the MODE button until you see "end" on the timer screen.

Digital Minute Minder

Simultaneously pres + flashing, and then you can set the time setting by using + and  buttons.

When you pres + or  buttons after setting the time, displayed, and the desired timing is set.

USING THE PROGRAMMING TIMER FOR THE Hi-End OVEN:

At the end of this time period, timer will make a beep sound but the oven

continues working. In order to turn the oven off, you must take the switch and thermostat of the oven to closed position.

8888

and  buttons of digital timer. The display will start

( ) symbol is

8888

Oven Function Selection :

Push the function button forward to select the desired cooking function. Turn the protruding button clockwise until you see the desired function on the display part. When you select the light function, only the oven illuminating light will operate and the display part will show "Lit". When the defrost function is selected, temperature adjustment for the oven interior cannot be made and the display will show Del. When turbo and the lower-upper fan are adjusted to the pizza position, the oven interior temperature will be seen as 175°C on the display. Adjust the desired temperature by using the "+" and "-" keys. When adjusted to grill, double grill, double grill+fan positions, the oven interior temperature will be seen as 200°C on the display. Adjust the desired temperature by using the "+" and "-" keys.

Use the "+" and "-" keys beneath the temperature indicator for oven interior temperature adjustment. The oven interior temperature can be increased or decreased by stages of 5 degrees each.

Adjusting the time:

The time must be adjusted before starting to use the oven. Following the initial power supply to the oven, three zeros will begin to flash on the right display. Press the second button from the left with the symbol and the third button with the

symbol simultaneously. The zeros will begin to light continuously and the dot in the middle will begin to flash. While in this position, you can adjust the time by using the (+) and (-) buttons. After the adjustment, it should be expected that the dot in the middle will be lit continuously. After the time adjustment, the oven will be operable at manual function. When the oven is adjusted to any function, the timer screen will show a cooking symbol and the oven starts to operate.

As the adjusted time will be reset in the event of a power failure, time adjustment operation will have to be performed again.

Timer Adjustment :

This function can be used to set a time which you wish to be reminded of after a certain period of time.

Among the 5 buttons beneath the timer, press the button on the far left with the symbol.

Three zeros will appear on the timer screen and the dot in the middle and the symbol

beneath the dot will begin to flash. You can adjust the desired period of time by using the (+) and (-) buttons while in this position. After the adjustment is done, if you wish the screen to remain at the same position you set, do not press any button following the adjustment. If you leave the screen in this position, you can see the countdown of the time period you set on the screen. The counting operation is performed as minutes up until it reaches 1 min. When it drops below 1 minute, the counting will be performed as seconds. If you wish the screen to

return to the timer screen, press the button with the symbol on the far left.

You can set a time between the time range of 0 and 24.

When the time is up, the timer gives an audible warning and the symbol disappears on the screen.

Timer Adjustment is for warning purposes only. The oven will not be activated at this function.

Semi-Automatic Programming :

This function is used to cook in the desired time range. The foods to be cooked are put into the oven. The oven is adjusted to the desired cooking function. Adjust the desired cooking temperature by using the (+) and (-) keys beneath the left display. Press the second button from the left with the symbol and the third button with

the symbol beneath the timer screen simultaneously. Three zeros will appear on the

screen and the Auto symbol and the dot in the middle will begin to flash. You can adjust the desired period of time by using the (+) and (-) buttons. Some time after the adjustment operation is completed, the timer will move to the timer screen and the symbols Auto and will begin to continuously light on the screen.

audible warning. After bringing the oven setting button to 0 position, you can silence the ringing by pressing any button. When this operation is carried out, the oven will move to the manual use position.

At the completion of the set duration, the timer will stop and the timer will give an

A cooking period between the time range of 0 and 10 hours can be set.

Full-Automatic Programming :

When the oven function button is in 0 position, no programming can be carried out. Also; if the oven button is brought to the off position for any reason when programming is carried out, the programming will be cancelled. This programming is used to cook after a certain period of time, within a certain duration. The food to be cooked is put into the oven. The oven is adjusted to the desired cooking function. Adjust the desired cooking temperature by using the (+) and (-) keys beneath the left display.

First; press the second button from the left with the symbol on the timer screen. Three zeros will appear on the screen and the

Auto symbol and the dot in the middle will begin to flash. You can adjust the desired period of time by using the (+) and (-) buttons.Some time after the adjustment operation is completed, the timer will move to the timer screen and the symbols Auto and will begin to continuously light on the screen.

A cooking period between the time range of 0 and 10 hours can be set.

Second; press the button with the symbol in the middle of the timer screen. The days

time will appear on the screen, with the addition of the set cooking period. You can adjust the desired time to stop the oven by using the (+) and (-) buttons.

You can set a time which can be up 24.00 hours after the time obtained by adding the cooking period to the days time.

The oven will start operating at the time calculated by deducting the cooking period from the set finishing time, and will stop at the set finishing time. The timer will give an audible warning and the Auto symbol will begin to flash. After bringing the oven button to 0 position, pressing any button of the timer will end the audible warning. Also, the timer will be brought to manual use function.

min

1-2

1-2-3

1-2

1-2-3

1-2

3-4

1-2-3

1-4

Accessories Used in the Oven :

3. or

the 4.rack

It is recommended that you use the containers indicated on the table depending on the food you will cook in your oven. Apart from the oven trays which are supplied together with your oven, you can also use glass containers, cake cutters, special oven trays suitable for use in your oven, available in the market. Pay attention to the information given by the manufacturer firm concerning this issue. If small sized containers are used, place this container on the inner grill wire so it will be precisely on the middle of the wire. The information given below should be implemented for enamelled containers. If the food to be cooked does not completely cover the oven tray, if the food is taken out of the deep-freezer or if the tray is used to collect the dripping juices of the foods during the grill operation; deformation might be observed on the tray due to high temperatures forming during the cooking/frying operation. However; the tray will regain its shape after cooling off following the cooking operation. This is a normal, physical state that results during the heat transfer. Do not leave a glass tray or container in a cold environment immediately after cooking in them.Do not place them on cold and wet surfaces. Ensure that they slowly cool off placing them on a dry piece of cloth. Otherwise, the glass tray or container might break. If you are going to perform a grill operation in your oven, we recommend that you use the grill on the tray, supplied together with your product (if your product includes this equipment). This way, splattering and dripping oils will not make the oven interior dirty. If you are going to use the large wire grill, insert a tray into one of the lower racks to avoid accumulation of the oils. To make cleaning easier, add some water into it as well. In a grilling operation, use the 4. or the 5.rack and oil the grill to prevent the food to be grilled from sticking to the grill.

5. Rack

4. Rack

3. Rack

2. Rack

1. Rack

Wire Grill : Used for grills or for placing different containers other than the cooking tray on it.

Shallow Tray: Used for baking pastry such as flans etc.

Deep Tray: Used for cooking stews.

6. rack

5. rack

4. rack

3. rack

2. rack

1. rack

PART 5 : CLEANING AND MAINTENANCE OF YOUR OVEN

5.1 CLEANING

Be sure that all control switches are off and your apparatus cooled before cleaning your oven. Switch off the apparatus. Control whether they are appropriate and recommended by the manufacturer before using the cleaning materials on your oven. As they may damage the surfaces, do not use caustic creams, abrasive cleaning powders, thick wire wool or hard tools. In case the liquids that overflows around your oven burn, the enameled place may be damaged. Immediately clean the overflew liquids.

Cleaning of Inside of Your Oven

Surely switch off the oven before starting cleaning

The inside of enameled oven is cleaned in the best way when the oven is warm. Wipe the oven with a soft cloth that had been hemmed in soapy water after each use. Later wipe it with a wet cloth once more and then dry it. It may be required to use a liquid cleaning material from time to time and make a complete cleaning. Do not clean with dry and powder cleansers.

lid

head

Cleaning of Gas Cookers, Hob Part

Lift up the saucepan carriers, hats and heads of cookers containing gas on upper part of your oven. Wipe and clean the back panel with a soapy cloth. Wash the hats and heads of cookers containing gas and rinse them. Pay attention to detents to pass and settle completely while placing the back panels after drying. Do not clean the back panel with a wire for dirty dishes. It causes the surface be scratched. The enamel where the saucepan carriers touch to the flame on end parts, may get old and shabby. The end parts of which the enamels get old and shabby do not cause to rust. Using them

5.2 MAINTENANCE

Change of Oven Lamp

At first plug off the oven and pay attention to oven is cool. Also remove the bulb after removing the cover in front of lamp. Affix the new bulb resistant to 300

C to the place of the bulb that you removed (230 V, 25 Watt, Type E14). Replace the lamp protective glass. Your oven will be ready for use after this process.

PART 6 : SERVICE AND TRANSPORT

6.1 REQUIREMENTS BEFORE CONTANTÝNG TO SERVICE

If the oven does not operate ;

The oven may be switched of may not be regulated.

If the oven does not heat ;

The heat may be not adjusted with ovens heater control switch.

If the interior lighting lamp does not light ;

The electricity must be controlled. It must be controlled whether the lamps are defective. If they are defective, you can change them as following the guide.

Cooking (If lower-upper part does not cook equally) ;

Control the shelf locations, cooking period and heat values according to the manual.

Except these, if you still have any problem with your product, please call to the Authorized Service.

6.2 INFORMATION RELATED TO TRANSPORT

If you need any transport ;

Keep the original case of product and carry it with its original case when needed to be carried. Follow the transport signs on case. Tape the cooker on upper parts, hats and heads and saucepan carriers to the cooking panels. Place a paper between the upper cover and cooking panel, cover the upper cover, then tape it to the side surfaces of oven. Tape cardboard or paper onto the front cover on interior glass of oven as it will be suitable to the traysi, for the wire grill and trays in your oven not to damage to the ovens cover during transport. Also tape the ovenscovers to the side walls.

f, there has been a black out. On models fitted with a timer, time

If it does not have the original case ;

Take measure for the external surfaces (glass and painted surfaces) of oven against possible blows.

52060026 09/11 R000

Award Appliances PO BOX 6269 Upper Riccarton Christchurch.

52007681 R003 09/09

Award AGE152CT User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual