AWA PC-D792 User's Manual

MP3/CD/Radio
Audio System

PCD-792

I N S T R U C T I O N M A N U A L

Before use, please read the manual carefully.

WARNING

1. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with

liquids, such as vases, shall not be placed on apparatus.

2. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat

such as sunshine, fire or the like.

3. WARNING: Excessive sound pressure from earphones and headphones can cause hearing loss.

4. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain

readily operable.

5. Do not install this equipment in a confined space such as a book case or similar unit.

The ventilation should not be impeded by covering the ventilation openings with items

such as newspaper, table-cloths, curtains etc.

6. Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam of laser.

7. No naked flame sources, such as lighted candles, should be placed on the apparatus.

8. Attention should be drawn to environmental aspects of battery disposal.

9. Use of the apparatus in moderate climates.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING : SHOCK HAZARD-DO NOT OPEN

LIGHTNING FLASH WITH ARROWHEAD SYMBOL -

within an equilateral triangle, is intended to alert the

us e r t o th e pr e sen c e o f un i nsu l ate d da n ger o us

voltage within the products enclosure that may be of

sufficient m agn itu de to constitu de a r isk of electri c

shock to persons.

The following label has been affixed to the unit, listing the proper procedure for working with the laser beam:

CLASS 1 LASER PRODUCT LABEL -

CLA SS 1 LA SE R PRO DU CT
KLA SS 1 LA SE R APP AR AT
LUO KE N 1 L AI SERLA IT E
KLA SS E 1 L AS ER PR OD UKT

This label is attached to the place as illustrated to inform that the

apparatus contains a laser component.

WARNING LABEL INFORMING OF RADIATION -

This label is placed inside the unit. As shown in the illustration. To

warn against further measures on the unit. The equipment contains

a laser radiating laser rays according to the limit of laser product of

class 1.

EXCLAMATION POINT -

is used to indicate that a specific component shall be

replaced o nl y by t he c omponent spec if ie d in t ha t

documentation for safety reason.

within an equilateral triangle,

E-1

SAFETY INSTRUCTIONS

1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.

2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference.

3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS - All operating instructions should be followed.

5. WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl,

kitchen sink, laundrytub, swimming pool or in a wet basement.

6. VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper
ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in
installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

7. HEAT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances
(including amplifiers) that produce heat.

8. POWER SOURCE - The ap pl ia nce sho ul d be co nn ec ted to po wer sup pl y only of t he type d es cribed in the
operating instructions or as marked on the appliance.

9. GROUNDING - Precautions should be taken to ensure that the grounding means of an appliance is not defeated.

10. POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked

on or pinched by items placed upon or against them.

11. POWER LINES - An outdoor antenna should be located away from power lines.

12. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into

the enclosure through openings.

13. ESD WARNING - The display does not function properly or no reaction to operation of any the control may due

14. DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service personnel when:

a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
c. The appliance has been exposed to rain.
d. The appliance has been dropped, or the enclosure damaged.
e. The appliance does not appear to operate normally.

15. SERVICING - The user should not attempt to service the appliance beyond that described in the user operating
instructions. All other servicing should be referred to qualified service personnel.

Notes:

a. Dirty or scratched CD may cause a skipping problem. Clean or replace the CD.
b. If an error display or malfunction occurs, disconncet the AC cord and remove all the batteries. Then turn the power
back on.

to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds.

BEFORE OPERATION

Notes: CONCERNING COMPACT DISCS.

Since dirty, damaged or warped discs may damage the appliance, care should be taken of the followings items:
a. Usable compact discs. Use only compact disc with the mark shown below.
b. CD compact disc only with digital audio signals.

E-2