AWA MSDV3211-O3 User Manual

USER MANUAL

Thank you for purchasing this LCD TV. Before connection and operation of this

product please read the manual carefully and completely.

Please keep this manual for future reference.

N294

MSDV3211-O3

32" (81cm) HD READY LCD Television

Contents

-1-

INTRODUCTION..............................................................................1

SAFETY AND WARNINGS.............................................................2-4

STAND INSTALLATION GUIDE.........................................................5

WALL MOUNTING INSTALLATION GUIDLINES................................. 6

INSTALLATION..........................................................................7 -12

REMOTE CONTROL.................................................................13-14

OPERATION.............................................................................15-19

TROUBLE SHOOTING....................................................................20

TECHNICAL SPECIFICATION.........................................................21

-2-

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

CAUTION

CAUTION

The symbol indicates that dangerous
voltages constituting a risk of electric
shock are present within this unit.

The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying
this unit.

To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.

WARNING:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings,
install in accordance with the instructions.

8) Do not install near any heat sources such
as radiations, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.

9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protected the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

11) Only use attachments/accessories
specified by the manufacturer.

12) Unplug this apparatus during lighting
storms or when unused for long periods of
time.

13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.

14) Mains plug is used as the disconnect
device, the disconnect device shall remain
readily operable.

15) The ventilation should not be impeded
by covering the ventilation openings with
items, such as newspapers, table-cloth,
curtains, etc.

16) No naked flame sources, such as
lighted candles, should be placed on the
apparatus.

17) Attention should be drawn to the
environmental aspects of battery disposal.

18) The use of apparatus in moderate
climate.

19) The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.

This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts. When servicing use only
identical replacement parts.

The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.

WARNING:

-3-

High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set.
Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not
expose the television receiver to rain or moisture.

Do not drop or push objects into the television
cabinet slots or openings. Never spill any kind
of liquid on the television receiver.

Do not block the ventilation holes in the back
cover.
Adequate ventilation is essential to prevent
failure of electrical components.

Do not trap the power supply cord under the
television receiver.

Never stand on, lean on, or suddenly push the
television or its stand. You should pay special
attention to children. Serious injury may result if it
falls.

Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an individual,
and damage to the television, may result if it falls.

When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.

If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.

Dim:515*320mm(

SAFETY AND WARNINGS

-4-

CAUTION

Never tamper with any components inside the TV, or any other adjustment controls not mentioned in
this manual.
All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD
PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with
a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent
damage to your TV. All repairs to this TV should only be performed by qualified TV service
personnel.

Warning: Change or modifications to this unit not expressly by the part responsible for compliance
could void the user 's authority to operate the Equipment.

a. Do not expose to dripping or splashing.
b. No objects filled with liquids, such as vases, shall be placed on the apparatus.
c. The mains plug of this device is used as the disconnect device and shall remain readily accessible
and operable.
d. No naked flame sources, such as lighted candles, should be placed on the apparatus.
e. Allow suitable distances around the apparatus for sufficient ventilation. Ventilation should not be
impeded by covering ventilation openings with items such as newspapers, table cloths, curtains and
such like.

The display panel is a very sensitive and high technology product, giving you finely detailed
pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of
black, blue, green or red. Please note that this does not affect the performance of your product.
These pixels shall not be regarded as a failure.

About After- Image
The extended use of fixed image programme material can cause a permanent after - image on
the screen.
This background image is viewable on normal programs in the form of a stationary fixed image.
This type of irreversible screen deterioration can be limited by:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.

Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed
Image Displays.
Do not allow a still picture to be displayed for an extended period, as this can cause a
permanent after-image to remain on the screen.

Examples of still pictures include logos, video games, computer images, teletext and images
displayed in 4:3 mode.

CAUTIONS:
The permanent after-image on the screen resulting from fixed image use is not an operating
defect and as such is not covered by the warranty.
This product is not designed to display fixed images for extended periods of time.

SAFETY AND WARNINGS

-5-

This STAND INSTALLATION GUIDE is provided to help you easily install the stand .Please carefully follow
Step 1 through Step 3.

STAND INSTALLATION GUIDE

Open the box and find the parts

Open the box and find the following parts.

- Stand x1 pc

- Screws x4 purchase

Packing

Stand

Packing

TV

Screws

Stand

Place the Stand on the TV

1. Place the TV with the display side down
on the table or the desk (flat surface).

2. Place the Stand on the TV as shown below.

Stand

Secure the Stand to the TV

Secure the Stand to the TV by using 4 pcs Screws.

1 2

43

For wall mounting with the optional bracket, please read the following instruction and the
bracket instruction. Make sure qualified service personnel perform the operation.

bears no responsibility for improper mounting that results in accident or injury.

DICK SMITH

Wall Mounting Holes Spacing and Location

Base Stand Disassemble Illustration

How to remove the stand from the TV
(The LCD Display is very fragile, and must be protected at all times when removing the
base stand. Be sure that no hard or sharp object, or anything that could scratch or
damage the LCD display, comes into contact with it. DO NOT exert pressure on the front
of the unit at any time because the screen could crack.)

1.Use the screwdriver to remove 4 screws from the screw location.

2.Remove the base stand from the Main body.

4 Wall mount M4 Screws

-6-

INSTALLATION

400 mm

200 mm

FRONT PANEL

AC Power Cord.........................

1

Infrared Remote Control............

1

User s M anual ........................

1

Battery(AAA)...........................2

ACCESSORIES

INSTALLATION

-7-

1: Remote control sensor.

2: Indicator LED: GREEN POWER ON.

RED STANDBY.

3: Key board.

1 2 3

4 5 6

7 8 9 0

+

CH

_+_

VOL

30 30

3

1

2

INSTALLATION

KEY BOARD

REAR PANEL

-8-

All the terminals are(from left to right):
AC POWER SOCKET, HDMI2 input, HDMI1 input, YPbPr input, AV1, Rear Audio input,
PC AUDIO input, AV output, VGA, ANTENNA SOCKET.

Note: 1.AV1 and YPbPr share the Rear Audio input channel.

2.When HDMI1 port get DVI signal, the audio signal receives from the PC Audio
channel.

1 SOURCE
Display the input source menu.
2 MENU
Display main MENU.
3 CH+/CH-

In TV mode press CH+ or CH- to change
the channel up and down.
In MENU mode, press CH+ or CH- to select
items .
In standby mode, press CH+ or CH- to turn
on the TV.

4 VOL+/VOL-

Adjust sound level.
In MENU mode, press VOL+ or VOL- to
adjust the item that you selected.

5. STANDBY
Press this button to turn the unit ON from
STANDBY mode.
Press it again to turn the set back to STANDBY.

SOURCE

MENU

CH+

CH-

VOL+

VOL-

STANDBY

VGA INPUT

RF INPUT

PC

AUDIO INPUT

100-240V~ 50/60Hz

AC-INPUT

HDMI1 INPUT

HDMI2 INPUT

AV

L

R

AV OUTPUT

ANTENNA CONNECTION

INSTALLATION

Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.

-9-

STEPS:

CONNECTING TO PC

Be sure both the TV and computer are set to Power off.

1.Connect VGA and audio cable.

2.Connect the power cord.

3.Power on the TV, switch the input source to VGA mode.

4.Power on the PC.

This sequence is very important.

INSTALLATION

-10-

VGA INPUT

RF INPUT

PC

AUDIO INPUT

100-240V~ 50/60Hz

AC-INPUT

HDMI1 INPUT

HDMI2 INPUT

AV

L

R

AV OUTPUT

PRESET MODE

INSTALLATION

PC PRESET

-11-

1

2

3

4

5

6

7

720*400

640*480

800*600

800*600

800*600

1024*768

1024*768

70

60

56

60

72

60

70

31.47

31.47

35.156

37.88

48.08

48.36

56.48

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

INSTALLATION

CONNECTING TO AV EQUIPMENTS

-12-

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video

game or stereo system, etc.....

YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i.

This TV provides two group of AV, one group of YPbPr for convenient connectionto VCR,
DVD or other video equipment. Please refer to the owner s manual of the equipment to be
connected as well.

You can use the input terminals on TV set rear as follows.

W

R

To audio outputs

VIDEO EQUIPMENT

TO VIDEO output

W R

W R

G

B

R

G

B

R

Yellow (video)

White(audio L)

Red(audio R or Pr)

Y

W

R

Blue(Pb)

Green(Y)

B

G

HDMI

VIDEO EQUIPMENT with YPbPr

W

R

W

R

W R

TO AUDIO INPUTS

VIDEO EQUIPMIENT

TO VIDEO
INPUTS

VGA INPUT

RF INPUT

PC

AUDIO INPUT

100-240V~ 50/60Hz

AC-INPUT

HDMI1 INPUT

HDMI2 INPUT

AV

L

R

AV OUTPUT

USB

VIDEO

L

R

AV2

-13-

REMOTE CONTROL

1OK2 3

4 5 6

7 8 9 0

+

CH

_

+

_

VOL

POWER

MUTE

AUDIO

RECALL

TV MENU SOURCE

CH.LIST

SOUND

EXIT

PIC

SLEEP ASPECT

TEXTTV/RADIOFREEZE

INFOFAVEPG

REVEAL

HOLD

LIST

INDEX

SUBPAGE SIZE MIX SUBTITLE

REP

25

14

15

20

18

16

13

17

19

21

23

24

22

8

2

3

4

5

7

12

1

6

9

10

11

26

27

28

29

30

31

32

33

1:POWER:Press to turn the unit on or off.
2:NUMERIC KEY:Press for direct access to channels.
3:TV MENU:Press to display TV Main Menu.
4:CURSOR:Press to scroll through the Menu.
5:CH.LIST:Press to display the channel list.
6:VOL+/- :Press to adjust the sound level.
7:PIC:Press to switch between picture modes.
8:SLEEP:Press to set Sleep Timer.
9:FREEZE :Press to freeze the picture you are
watching.
10:EPG:Press to display the 7 Day Electronic
Program Guide for information on the show you are
watching.
11: FAV:Press to access your favourite channels list
in TV or DTV mode
12:TELETEXT KEYS:Refer to next page.
13:MUTE:Press to disable or enable the sound output.
14: AUDIO:Press to change the available audio
/language for the program you are watching.
15: RECALL:Press to return to the previously viewed
channel.
16: SOURCE:Press to display the Input Source List.
17: OK:Press to confirm Menu selections.
18: EXIT:To exit the main menu, press the Exit Button
or to cancel setting selections.
19: SOUND:Press to switch between the sound modes.
20: CH+/CH-:Press to scroll through your Channel List.
21: ASPECT:Press to change the picture aspect ratio.
22:TV/RADIO:Press to switch between TV and Radio
modes.
23: TEXT:Press to enter or exit TELETEXT mode.
24: INFO:To display the program information of the
show you are watching, press the Info Button.
25: SUBTITLE:To turn on Subtitles press the Subtitle
Button in DTV mode.

26: SKIP FORWARD:Press to skip the next file or
track in USB Mode.
27: SKIP BACKWARD:Press to skip the previous
file or Track in USB Mode
28: REP:
29: STOP:Press to Stop play in USB Mode.
30: REWIND:Press to rewind play in USB Mode
and Timeshift Mode.
31: FAST FORWARD:Press to Fast Forward play
in USB mode or Timeshift Mode.
32:PLAY:Press the Play Button in USB Mode or
Time Shift Mode to begin or continue Playback.
33: PAUSE:Press the Pause Button to pause play
in Time Shift or USB Mode or pause recording in
Record Mode.

In USB mode,select Repeat mode.

REMOTE CONTROL

-14-

REMOTE CONTROL

T

EXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press:

You will obtain :

LIST

TELETEXT

Enter the number of the page required using the 0 to 9 up/down.
Example: page 120, enter 120. The number is displayed top left, the
counter turns and then the page is displayed. Repeat this operation to
view another page. If the counter continues to search, this means
that the page is not transmitted. Select another number.

Coloured buttons correspond to the colours at the bottom of the
screen. The 4 coloured keys are used to access the items or
corresponding pages. The coloured areas flash when the item or the
page is not yet available.

This returns to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically
displayed successively. This key is used to stop or resume sub­page acquisition. The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

The user can set four favourite pages to be directly linked to the four
color keys. While list mode is activated, it is not possibility to use TOP
or FLOF navigation with the colourkeys. The favourite page numbers
should be stored and restored to/from nonvolatile memory for each
channel by the system software.

This is used to call or exit teletext modes. The summary appears with
a list of items that can be accessed. Each item has a corresponding
3 digit page number. If the channel selected does not broadcast
teletext, theindication 100 will be displayed and the screen will
remain blank (in this case, exit teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be
consulted like a newspaper. It also offers access to subtitles for viewers with hearing
problems or who are not familiar with the transmission language(cable networks,
satellite channels, etc.)

-15-

OPERATION

Installation Guide

Pls press to select country at first , then press OK button to start auto tuning .

This screen only appear when the TV first time turn on or reset to factory settings.You can choose language
and country, auto tuning programs .And after tuning the screen will skip to the first DTV program.

1.CHANNEL MENU

The first item of the MENU is channel menu( for TV or DTV source only).

You can search channels and edit programs here.

1).Auto tuning:

Search all the channels automatically(you can select ATV and DTV)

ATV Manual Tuning
Programme Edit
Signal Information

< >< >

CHANNEL

Auto Tuning

DTV Manual Tuning

Software Update(USB)

Software Update(OAD)Off

Dansk

Deutsch

Hrvatski

Italiano

Please select an OSD Language

OK

Magyar

Nederlands

Norsk

PolskiEnglish

Cesky

E k

Espanol

~

Fran ais

Portugues

Pycck

Austria

Belgium

Country

OK

Australia

Croatia Finland Greece

Luxembourg

Czech France Hungary

Netherlands

Bulgaria Denmark Germany Italy

Tune Type DTV+ATV

MENU

Austria

Belgium

Australia

Croatia

Czech

Bulgaria

Finland

France

Denmark

NOTE:

All the channels including ATV, DTV and Radio can be tuned at once, if the Tune Type is DTV+ATV.
All the stored channels will be deleted after auto tuning is carried out.

After auto tuning , the channel will skip to the first DTV channel.

Channel Tuning

TV : 0 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)

96% UHF CH 68 DTV

2).DTV Manual tuning:
You can select a DTV channel then find the program in this channel.

Pls press to select the channel , then press OK to search the programs .

OPERATION

NOTE:

Bad Normal Good means signal intensity.

3). ATV Manual tuning :

You can change the sound system to search the analog TV channels and fine tune the channels , then
storage the channels you selected.

ATV Manual Tuning

Storage To 1

System BG

Current CH 1

Search

Fine-Tune

Frequency 255.25 MHz

Save MENU

__

++

DTV Manual Tuning

VHF CH 5

__

++

Bad Nomal

Good

Press OK to search

Rename:

Only can rename ATV programs.
Move the cursor to the program, press teletext green button to rename the program.
Press to choose the character. Press to move the cursor .
Press MENU button to exit edit , Press EXIT to exit the menu.
Note: ATV programs name only can be 5 characters, DTV programs name can be 25 characters.

Move the cursor to the program, press yellow button,then you can input the number of position, press OK,
the program will be moved.

Press to choose the program, press teletext blue button to skip this program, The will show on the
right side of the program .
Choose the skipped program, press blue button again , you can cancel the skip ,The will disappear .

NOTE:

Press teletext red button to store the channels after manual tuning.

4). Program edit:
You can Delete ,Rename ,Move, Skip , FAV any programs.

Delete

Press teletext red button, the program in the cursor will delete.

-16-

-17-

OPERATION

Favourite

Press to choose the program , press FAV button , it will show on the right side of the program.Choose
the FAV program , press FAV button again , you can cancel the FAV, will disappear .

Once your favorite group is created, you can press the FAV key to quickly access your favourite channel.

The second item of the MENU is PICTURE MENU.You can adjust picture effect here, such as contrast,
brightness, etc.
Press OK to move, press OK to adjust.

2. PICTURE MENU

Color Temperature

Aspect Ratio

Noise Reduction
Screen

Picture Mode Standard

< >< >

PICTURE

MENU

Picture Mode Standard

Contrast 82

Brightness 50

Color 50

Sharpness 50

Tint 50

Color Temperature Medium

Red 40

Green 31

Blue 50

MENU

NOTE:

1).Tint is available in NTSC system only.

2).There are four color temperature modes can be selected medium, warm, cool,user

3).Screen is available in PC mode only which, can adjust Horizontal position, vertical position, size and phase.

3.SOUND MENU

The third item of the MENU is the SOUND MENU.
You can adjust the sound effect here such as treble, bass, balance etc.
Press to move, press OK to adjust.

< >< >

Balance

Auto Volume

Sound Mode Standard

SOUND

Note:

Auto volume: only available when the input signal volume is too large or distortion.

4.TIME MENU

The forth item of the menu is the TIME MENU You can adjust the clock, power on/off time, sleep time etc
Press to move, press OK to adjust

NOTE:

Within 15 minutes there is no signal, the TV will auto sleep, if Auto Sleep is set ON. The clock time can be
set from the DTV system.

Off Time
On Time
Sleep Timer

Auto Sleep
Time Zone

Clock -- -- -- --

TIME

< >< >

-18-

OPERATION

5.OPTION MENU

To enter the Option Menu, press MENU button and the press or buttons to select the Option Menu.
Once in Option Menu, press or buttons to select the settings you wish to adjust. Press MENU button
to return to the Main Menu.

< >< >

OSD Language English

OPTION

Audio Languages
Subtitle Languages
Country Australia
Restore Factory Default

INOTE:

Restore factory default will clear all the programs and password.

Press the OK button to enter the DMP Menu.

PHOTO MUSIC MOVIE TEXT

6.LOCK MENU

To enter the LOCK Menu, press MENU button and then press or buttons to select the LOCK Menu.
The default password is 6666.
Please set a new password to so it is easy to remember. Follow the on screen steps to set.

Set Password

Lock System

LOCK

< >< >

Block Program

Parental Guidance Off

7. APPLICATIONS MENU

To enter the Applications Menu, press MENU button and then press or buttons to select the
Applications Menu. This is where you will be able to view and play your USB files.

< >< >

APPLICATIONS

DMP

The supported formats are as below:
Photo: JPEG, BMP, PNG
Music: MP3
Movie: AVI, MP4, MKV
Text: TXT

OPERATION

-19-

Schedule List 04:55 28th Apr Delete

Time Date

Programme Title

Channel Name

3.
Press the Blue Button to book a program for future viewing and add to the schedule list.

Remind

802 SZTVM03

08 Minute

05 Hour

Apr Month

28 Date

Once Mode

Reminder setting

BACK

OK

__

++

8.EPG Menu(Electronic Program Guide).

The EPG Menu is used to look at what is being broadcasted in DTV or Radio modes. Press the EPG
Button to access the EPG Menu. You will receive detailed program information of the channel you
are currently watching as well as the 7 Day Program guide.

Sample1.ts

Resolution: 720x576

Subtitle: 1/1

Size: 30574 KBytes

Close

AudioTrack: 1/2 ½

28 Apr 04:39

800 SZTVM01 No Information

801 SZTVM02

802 SZTVM03

803 SZTVM04

804 Date

No Information

No Information

No Information

No Information

PROGRAMME GUIDE TIME

ScheduleINFO

Remind

OK

INDEX

2.

Press the teletext yellow key, It can list all the reminder schedule, press to choose the list, press
red key to delete the schedule list, Press EPG to return to EPG menu.

Schedule

1.
Use to select a program and then press the Green Button or INFO key to display the highlighted
program's information.

INFO

DELETE

Picture Audio

Snow Noise

antenna position, direction
or connection

Inspection Check

Interference

Noise

electronic equipment,car/
motorcycle,fluorescent light

Normal Picture

Mute

Volume(check if mute is
activated or if the audio system
connections are not correct)

No picture Mute

Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting

No colour Normal audio Colour control

Picture
breaking up

Normal audio
or weak

retune channel

No colour

Noise

TVsystem

Normal audio

antenna position, direction
or connection

Trouble phenomenon Symptom

Ghost

-20-

TROUBLE SHOOTING

Mosaic

Unnormal

Antenna Loose

INTRODUCTION

-21-

Viewing Picture Size(diagonal)

Resolution

Aspect Ratio

Digital TV: DVB-T
Analog TV: PAL/SECAM

Power consumption

32"(81cm)

1366x768

16:9

Analog RGB(VGA) Input

Rear HDMI Input

Rear Composite Video Input

Rear Audio Input

Side Composite Video Input

Side USB
Rear Composite Video Output

Analog Audio Output

1

2

1

2

1

1
1

1

1

LCD :

Display colours

Brightness

Contrast ratio

Response time

Viewing angle

16.7M

3000:1

6.5 ms

178 (H)/178 (V)

TV:

DVB-T decode

DVB-T de-modulation

Audio: MPEG2 Audio Layer I&II
Video: MPEG2 Transport MP@HL

Demodulator : COFDM
OFDM Mod.: 2K, 8K FFT, SFN and MFN
Packed Carries: 2K/8K
Guard Interval: 1/4, 1/8, 1/16, 1/32

Terminals:

Input Power Voltage

100V-240V~ 50/60Hz

135W

2x8W

Others:

TV system

Audio Output Power THD 7%

)

Y Cb(Pb) Cr(Pr) Input

420 CD/M

2